MIL-J-87250 TECH_DATA_MANS LIGHTWEIGHT JACKET.pdf

JACKET, MAN'S: LIGHTWEIGHT WITH REMOVABLE LINER

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND

QUALITY REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A

FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

AIR FORCE BLUE SHADE 1605 SHALL BE MADE IN ACCORDANCE WITH MIL-J-87250 AND THE FOLLOWING

INFORMATION:

ADDITIONAL INFORMATION FOR MIL-J-87250:

PATTERN DATE: 19 MAY 2014

STANDARD SAMPLE OF BASIC CLOTH POLY/WOOL

GABARDINE, USAF COLOR BLUE, SHADE NO.

1605 IS AVAILABLE FOR SHADE AND COLORFASTNESS

PIECE NO. 11-02

STANDARD SAMPLE OF KNIT CUFF AND WAISTBAND, POLYESTER AF BLUE 1606 CONFORMING TO MIL-C-

3735, IS AVAILABLE FOR SHADE ON PIECE NUMBER 14-04

INTERIM CHANGES TO MIL-J-87250:

PAGE 2, PARA. 2.1.1: UNDER "SPECIFICATIONS, FEDERAL"

- ADD "V-T-295 THREAD, NYLON".

- DELETE "A-A-1696"

- DELETE "V-B-871"

- DELETE "V-F-106" AND INSERT "A-A-55634"

- DELETE "V-T-276" AND INSERT "A-A-52094".

- DELETE "V-T-280"

- DELETE "DDD-L-20" AND INSERT "MIL-DTL-32075"

- DELETE "PPP-B-601" AND INSERT "ASTM-D6251"

- DELETE "PPP-B-636" AND INSERT "ASTM-D1974 AND ASTM-D5118"

UNDER "SPECIFICATIONS, MILITARY"

- DELETE "MIL-P-116" AND INSERT "MIL-STD-2073"

- DELETE "MIL-F-21840" AND INSERT "A-A-55126"

- DELETE "MIL-T-43548" AND INSERT "A-A-50199"

- DELETE "MIL-C-43718" AND INSERT "A-A-52106"

UNDER "STANDARDS, FEDERAL"

- DELETE "FED-STD-751" AND INSERT "ASTM-D6193"

UNDER "STANDARDS, MILITARY"

- DELETE "MIL-STD-105" AND INSERT "MIL-STD-1916 OR ANSI/ASQ Z1.4"

PAGE 4:

- PARA. 3.3.1, LINE 2, AFTER "MIL-C-10176", INSERT, "EXCEPT REQUIREMENTS FOR SPONGING SHALL

NOT APPLY"

- PARA. 3.3.2, LINE 1, AFTER "SLEEVES", ADD

"INSIDE PATCH POCKET".

- PARA. 3.3.2 AT THE END OF THE PARAGRAPH

ADD: "AS AN ALTERNATE THE MATERIAL FOR THE RE-

MOVABLE LINERS OUTER LAYER, THE SLEEVE BINDING

THE PASS-THROUGH POCKETS AND THE EDGE BINDING

SHALL BE A NYLON TAFFETTA, CG BLUE 3376, CON-

TINUOUS FILAMENT, 70 DENIER, WEIGHING 1.9

(+/- 0.15) OZ./SQ. YARD.

THE MATERIAL SHALL HAVE 100 YARNS PER INCH (MIN)

IN THE WARP DIRECTION AND 68 YARNS PER INCH IN

FILLING DIRECTION (MIN), A MINIMUM BREAKING

STRENGTH OF 110 LBS. ( WARP) AND 85 LBS. (FILL),

AND MINIMUM TEARING STRENGTH OF 5.0 LBS, (WARP)

AND 3.5 LBS. (FILL). THE FINISHED MATERIAL SHALL

SHOW "GOOD" FASTNESS TO PERSPIRATION, DRY CLEAN-

ING AND LAUNDERING WITH WET/DRY CROCKING RATING

NOT LOWER THAN THAN 3.0 WHEN TESTED AS SPECIFIED

IN AATCC TEST METHODS 15, 132, 61&8 RESPECTIVELY

- PARA. 3.3.3, LINE 2, DELETE "CS100" AND

INSERT "CDS100".

- PARA. 3.3.3, LINE 3, AFTER "0.3", INSERT "."

AND DELETE "OR THERMOLITE T-0 HAVING A MINIMUM

WEIGHT OF 3.0 OUNCES...THICKNESS OF 0.3".

- PARA. 3.3.4, LINE 3, DELETE "MIL-F-21840" AND INSERT A-A-55126"

- PARA. 3.3.6, LINE 2, DELETE "3/4 TO 7/8 INCH

WIDE" AND INSERT "1-1/4 INCHES WIDE".

- PARA. 3.3.7, LINE 2, DELETE "MIL-C-43718" AND

INSERT "A-A-52106".

PAGE 5:

- PARA. 3.3.8, LINE 2, AFTER "MIL-C-3735",

ADD ", SHALL MEASURE 7-5/8 INCHES".

- PARA. 3.3.10, LINES 3 AND 4, DELETE "DDD-L-20" AND INSERT "MIL-DTL-32075".

PAGE 6:

- PARA. 3.3.11, DELETE ENTIRELY AND INSERT:

"3.3.11 SLIDE FASTENERS. THE SLIDE FASTENER FOR

THE FRONT CLOSURE SHALL CONFORM TO TYPE III,

STYLE 8, SIZE 5 OF A-A-55634. THE CHAIN SHALL BE

BRASS OR ALUMINUM WITH A SHORT TAB PULL. THE

TAPE SHALL BE COTTON/WARP AND NYLON FILLING OR

100% POLYESTER, AND SHALL BE DYED TO APPROX.

THE SHADE OF THE BASIC FABRIC. THE BRASS

COMPONENTS SHALL HAVE A BLACK CHEMICAL FINISH

AND THE ALL METAL COMPONENTS SHALL BE FROM THE

SAME CONTRACTOR. ALUMINUM COMPONENTS MAY HAVE A

BLACK CHEMICAL FINISH OR BLACK ENAMEL FINISH. AS

AN OPTION, A NICKEL-PLATED FINISH MAY BE USED ON

THE TOP STOP AND BOTTOM PIN AND BOX OF THE SLIDE

FASTENER."

- PARA. 3.3.12, DELETE PARAGRAPH ENTIRELY.

- PARA. 3.3.13, LINES 2 & 3, DELETE "TYPE IA3,

TICKET NO. 50 OR NO. 60, 3 PLY OF A-A-52094" AND

INSERT "TYPE I, TICKET NO. 50 OF A-A-52094".

- PARA 3.3.13, LINES 4 & 5, DELETE "MIL-T-43548.

THE THREAD FOR SEWING ON THE BUTTON...V-T-276."

AND INSERT "A-A-50199. AS AN ALTERNATE FOR

THE OVEREDGE PORTION OF STITCH TYPES 515, 516,

517, 518 AND 519, THE THREAD SHALL CONFORM TO

A-A-50199 TICKET NO. 100, TEX 25-30. AS AN

ALTERNATE, THE THREAD FOR QUILTING THE LINER MAY

ALSO BE NYLON, CONFORMING TO TYPE VII, CLASS A,

SIZE A OF A-A-59826."

- PARA. 3.3.14, DELETE PARAGRAPH ENTIRELY.

- PARA. 3.4, LINE 2, AFTER "COLLARSTAND", DELETE

"WITH A THROAT TAB THAT BUTTONS,".

.- PARA. 3.4, AT END, ADD "EACH JACKET SHALL HAVE

AN INSIDE PATCH POCKET ON THE LEFT SIDE."

- PARA. 3.5, LINE 2, DELETE "SIDE SEAMS,".

- PARA. 3.5, LINES 3 & 4, DELETE "FOR ARMHOLES

AND JOINING THE COLLARSTAND TO THE BODY; AND"

AND SUBSTITUTE "FOR ALL OTHER SEAMS EXCEPT".

- PARA. 3.5, LINE 4, AFTER "COLLAR", ADD "." AND

DELETE "AND STAND EXTENSION." ADD NEW SENTENCE

"THE SIDE SEAM ALLOWANCE FOR THE LINER SHALL BE

3/8 INCH TO ALLOW FOR SOME TRIMMING BY SERGER

(APPROXIMATELY 1/8 INCH) PER SEAM.".

- PARA. 3.5, AFTER LAST SENTENCE, ADD:

"MINOR MODIFICATIONS ARE PERMITTED WHERE

NECESSARY WHEN USING AUTOMATIC EQUIPMENT. THESE

MODIFICATIONS SHALL NOT ALTER THE DIMENSIONAL,

SERVICEABILITY, OR APPEARANCE REQUIREMENTS CITED

IN THE SPECIFICATION."

PAGE 7:

- TABLE I. LIST OF PATTERN PARTS:

- OPPOSITE "LINING" UNDER "UNDERSLEEVE" ADD

"INSIDE POCKET" IN PATTERN NOMENCLATURE COLUMN

AND "1" IN CUT PARTS COLUMN.

- UNDER PATTERN NOMENCLATURE, ADD:

"INSIDE LINING POCKET MARKER ALL SIZES

FINISHED SHAPER SIZE 32 - 38

FINISHED SHAPER SIZE 40 - 50"

- PARA 3.6.1, LINE 2, DELETE "TABLE II SHALL CONFORM TO FED-STD-751." AND INSERT "ASTM-D6193."

PAGE 9:

- OPER. 1.A. LINE 3, DELETE "BUTTONS, AND BUTTONHOLE;"

- OPER. 1.B, LINE 3, DELETE "2 INCHES" AND

INSERT "1 INCH".

- OPER. 1.C, LINES 5, 6, & 7, DELETE "26", "27"

"28" & SUBSTITUTE "27", "28", "30" RESPECTIVELY.

PAGE 10:

- OPER. 4.A, LINE 2, AFTER "SHOULDER LOOPS,"

INSERT "OUTERSHELL WAISTBAND EXTENSION PIECES,"

- OPER. 6.B, LINE 4, DELETE "2-1/2 INCHES" AND

SUBSTITUTE "2-3/8 (+ 1/8 INCH)".

- OPER. 6.B, LINE 5, DELETE "2" AND SUBSTITUTE

"1-7/8 (+ 1/8 INCH)".

- OPER. 6.B, LINE 6, DELETE "AT THE NECK" AND

SUBSTITUTE "AT THE BASE OF THE POINT."

PAGE 11:

- OPER. 8.A, LINE 6, DELETE "AROUND THE STAND

EXTENSION".

- OPER. 8.NOTE, LINE 2, DELETE "3-1/8 (+/- 1/8)"

AND SUBSTITUTE "3-3/8 (+/- 1/8)".

- OPER. 8.NOTE, ADD AT END "FINISHED WIDTH OF

COLLARSTAND AT CENTER BACK, SHALL BE 1-3/4

(+/- 1/8) INCH WIDE."

PAGE 12:

- OPER. 9.B:

-- LINES 2 & 3, DELETE "BACK-STITCHED OR".

-- DELETE "301 OR" FROM STITCH TYPE COLUMN AND

ADD "28 PER BARTACK" IN STITCHES PER INCH COLUMN

PAGE 13:

- PRIOR T0 OPER. 12.A, ADD: "NOTE: AUTOMATED POCKETING EQUIPMENT MAY BE USED TO PERFORM

THIS OPERATION."

- OPER 12.I, LINE 1, AFTER "JOINING" ADD "FRONT"

PAGE 14, BEFORE OPER. 15, ADD NEW OPERATION:

"MAKE AND ATTACH INSIDE PATCH POCKET.

A. FOLD POCKET IN HALF WIDTH WISE AND STITCH

1/2 INCH FROM THE TOP FOLDED EDGE.

301 SSA-1 10 - 14

B. TURN TOP OF POCKET, WITH THE SIDE AND BOTTOM

EVEN, PRESS POCKET FLAT.

C. PLACE POCKET AT PATTERN MARKS AND ATTACH TO

LINING, AT THE FOLDED EDGE OF THE POCKET, ATTACH

1/16 INCH FROM THE EDGE, CONTINUE THE STITCHING

3/16 TO 1/4 INCH ACROSS THE TOP OF THE PATCH

POCKET AND 1/2 TO 5/8 IN A DIAGONAL DOWN TO THE

LINE OF THE 1/16 INCH STITCHING.

301 SSA-1 10 - 14

NOTE:

FOR SIZES 32 - 38, THE TOP OPENING SHALL FINISH

4-3/4 (+/- 1/8) INCHES.

FOR SIZES 40 - 50, THE TOP OPENING SHALL FINISH

5-1/4 (+/- 1/8) INCHES."

PAGE 15:

- OPER. 16.B, IN "SEAM AND STITCH TYPE" COLUMN,

DELETE "SSA-1" AND SUBSTITUTE "LSS-2".

- OPER. 17.B, LINE 4, DELETE "9 +/- 1/2 INCHES

FROM BOTTOM OF JACKET." AND SUBSTITUTE

"1/4 (+/- 1/8) INCH BELOW THE MIDDLE PILE

FASTENER TAPE.".

PAGE 16, OPERS. 20.A THRU 20.C, DELETE ENTIRELY

AND SUBSTITUTE AS FOLLOWS:

"A. THE LOOPS SHALL BE CENTERED ON THE SHOULDER

SEAMS IN ACCORDANCE WITH THE NOTCHES ON THE

PATTERNS AND STITCHED TO THE ARMHOLE 1/4 TO 3/8

INCH FROM COLLARSTAND SEAM.

301 SSA-1 10 - 14

B. JOIN THE SLEEVES TO THE JACKET, CATCHING THE

SHOULDER LOOPS IN SEAM.

301 SSA-1 10 - 14

C. PRESS SEAM FLAT AND TOWARD SLEEVE.

D. ATTACH SHOULDER LOOPS TO JACKET, STITCHING

FROM SHOULDER POINT TO CENTER POINT TO SHOULDER

LOOP POINT.

301 SSA-1 10 - 14"

PAGE 17:

- OPER. 22.E, DELETE "AND PRESS".

- AFTER OPER. 22.E, DELETE "NOTE" ENTIRELY AND

SUBSTITUTE THE FOLLOWING:

"NOTE: FINISHED CUFF SHALL MEASURE 3 (+/- 1/8)

INCHES WIDE FOR SIZES 34 THRU 40 AND 3-3/4

(+/- 1/8) INCHES WIDE FOR SIZES 42 THRU 50."

- OPER. 23, IN TITLE, AFTER "TAPE", ADD "TO

JACKET". LINE 2, BEFORE "FACING", ADD "JACKET".

ADDITIONAL INTERIM CHANGES TO MIL-J-87250:

PAGE 4, PARA. 3.3.3, "INSULATING CLOTH" DELETE

IN ITS ENTIRETY AND SUBSTITUTE "3.3.3 INSULAT-

ING CLOTH. THE INSULATING CLOTH FOR THE LINER

SHALL HAVE DUAL SCRIM.THE BATTING SHALL BE COMP-

OSED OF 65% POLYOLEFIN/35% POLYESTER (EXCLUDING

SCRIM), WITH A MINIMUM WEIGHT OF 3.0 OZ/YD (EX-

CLUDING SCRIM) AND A MINIMUM THICKNESS OF 0.3

INCHES. THE MINIMUM R VALUE FOR WARMTH SHALL BE

1.14.THE INSULATING CLOTH SHALL BE DRY CLEANABLE

AND MACHINE WASHABLE. CERTIFICATES OF COMPLIANCE

SHALL BE SUBMITTED FOR ALL REQUIREMENTS, AND THE

GOVERNMENT RESERVES THE RIGHT TO INSPECT SUCH

COMPONENTS TO DETERMINE THE VALIDITY OF THE

CERTIFICATION."

PAGE 4, PARA. 3.3.6, LINE 2, AFTER "1-1/4" ADD

"(+/- 1/8)."

PAGE 6, OPER. 3.3.13. LINE 1, DELETE THE WORD

"BUTTONHOLE MAKING." LINE 2, DELETE "RAYON"

PAGE 16, OPER. 20B DELETE "TOWARD SLEEVE" AND

SUBSTITUTE "AWAY FROM SLEEVE".

PAGE 18:

- OPER. 25.B, LINE 3, AFTER "STITCHING" ADD

"1/2 INCH".

- OPER. 26.A, LINE 1, DELETE"ON" AND SUBSTITUTE

"BETWEEN".

- OPER. 26.A, LINE 3, DELETE "STITCH THROUGH

BOTH PLIES," AND SUBSTITUTE "THE FACING. STITCH

THROUGH ALL PLIES,".

- OPER 26.B & 26.C,DELETE ENTIRELY & SUBSTITUTE

"B. TURN AND ROLL THE FRONT EDGE OF THE OUTER

SHELL OUT SO THAT THE CHAIN IS COVERED AND

STITCH 3/8 TO 1/2 INCH FROM THE FOLDED OUTER

SHELL & 1/8 INCH FROM THE FACING (SEE FIGURE 1)"

PAGE 19, OPERS. 29 AND 30, DELETE ENTIRELY.

PAGE 23, TABLE III, "FINISHED MEASUREMENTS":

- IN "BACK" COLUMN FOR SHORT, REGULAR, LONG AND

EXTRA LONG, SUBTRACT 1/2 INCH FROM ALL SIZES.

- IN "COLLAR" COLUMN FOR SHORT, REGULAR, LONG

AND EXTRA LONG, ADD 1/2 INCH FOR ALL SIZES.

PAGE 24, FOOTNOTE 4/, LINE 1, DELETE "LONG" AND

SUBSTITUTE "ALONG".

PAGE 28, PARA 4.4.3.1, LINES 5 & 6, DELETE "2.5"

"15.0" AND "40.0" AND SUBSTITUTE "1.5", "10"

AND "25" RESPECTIVELY.

PAGES 32 & 33, TABLE VI. "GENERAL DEFECTS",

DELETE DEFECTS 7 & 8 ENTIRELY.

PAGE 35, TABLE VII."DEFECTS APPLICABLE TO

SPECIFIC PARTS", DEFECT 3:

- LINE 5, DELETE "2-5/8 INCHES" AND SUBSTITUTE

"2-7/8 INCHES".

- LINE 6, DELETE "2-7/8 INCHES" AND SUBSTITUTE

3-1/8 INCHES".

PAGE 38, TABLE VII. "DEFECTS APPLICABLE TO

SPECIFIC PARTS", DEFECT 11:

- LINE 3, AFTER "JACKET", DELETE "(HOOK TAPE)".

- LINE 4, AFTER "LINER", DELETE "(LOOP PILE

TAPE)".

PAGE 42, PARA 6.6, LINES 7-10, DELETE

"THERMOLITE...19880-0705".

AQL'S:

END ITEM DIMENSIONAL 4.0

VISUAL 6.5

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE

INSPECTION BY ATTRIBUTES, ANSI/AQSC Z1.4

GENERAL INSPECTION LEVEL 2".

(Ref. W2088)

PACKAGING:

LARGE QUANTIES SHOULD BE SHIPPED IN THE STANDARD UNIT PACK (12 UNITS) CITED IN THE END ITEM SPECIFICATION - HANGER PACK. ALL REQUISITIONS FOR FULL UNITS OF PACK ARE REQUIRED TO BE HANGER PACKED WHEN SHIPPING LESS THAN FULL UNITS OF PACK, THE CONTRACTOR IS ALLOWED TO

SHIP ACCORDING TO BEST COMMERCIAL PRACTICE.

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE.

THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED.

THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT

CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF MIL-

DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF

MIL-DTL-32075.

ADDITIONAL INFORMATION FOR A-A-50083:

ADD THE FOLLOWING INTERIM CHANGES:

PAGE 1, PARA. 1.2, DELETE SECOND SENTENCE ENTIRELY, AND SUBSTITUTE "THE THICKNESS OF THE

MATERIAL SHALL BE 0.0010 TO 0.0090 INCHES IN ACCORDANCE WITH L-P-378."

(ref. T0894 - 5/23/06)

INTERIM CHANGES TO A-A-52094:

NO CHANGES

INTERIM STANDARD SAMPLE FOR FOLIAGE GRFEEN 504

IDENTIFIED AS ROLL #3721 (THE FOLIAGE GREEN 502

AREA OF THE PATTERN CLOTH MIL-C-44436), AND REFERENCED

FOR SHADE ONLY. THIS STANDARD IS TEMPORARY UNTIL FURTHER

NOTICE.

ADDITIONAL INFORMATION FOR NN-P-71:

NO ADDITIONAL INFORMATION FOLLOWS..

ADDITIONAL INFORMATION FOR MIL-I-45208:

NOTE: MIL-I-45208 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: INTERNATIONAL

STANDARDS ISO 9001:2008

OR AMERICAN SOCIETY FOR QUALITY ASQ 2008 VERSION.

(ref. T1286 )

"MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

ADDITIONAL INFORMATION FOR A-A-50083:

ADD THE FOLLOWING INTERIM CHANGES:

PAGE 1, PARA. 1.2, DELETE SECOND SENTENCE ENTIRELY, AND SUBSTITUTE "THE THICKNESS OF THE

MATERIAL SHALL BE 0.0010 TO 0.0090 INCHES IN ACCORDANCE WITH L-P-378."

(ref. T0894 - 5/23/06)

ADDITIONAL INFORMATION FOR MIL-C-3735:

STANDARD SAMPLE FOR SAGE GREEN 1590 IS IDENTIFIED AS PIECE #52 AND REFERENCED FOR SHADE

ONLY.

INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS MIL-C-44436, ROLL #3729 (THE FOLIAGE

GREEN 502 AREA OF THE PATTERN), AND REFERENCED FOR SHADE ONLY.

INTERIM CHANGES TO MIL-C-3735E:

PAGE 4, PARAGRAPH 2.2 OTHER PUBLICATIONS. ADD THE FOLLOWING BELOW "METHOD NO. 8

COLORFASTNESS TO CROCKING: AATCC CROCKOMETER METHOD" "AATCC 20 - FIBER ANALYSIS:

QUALITATIVE"

PAGE 4, PARA. 3.3.3.1, FIBER.: DELETE IN ITS ENTIRETY AND SUBSTITUTE THE FOLLOWING:

"3.3.3.1 ARAMID FIBER BLEND. THE BLEND SHALL CONSIST OF 92 PERCENT META-ARAMID FIBER, 5 PERCENT PARA-ARAMID FIBER AND 3 PERCENT CONDUCTIVE FIBER. THE ARAMID FIBERS SHALL HAVE A NOMINAL DENIER OF 1.5 TO 1.7 DENIER PER FILAMENT, A STAPLE LENGTH OF 1-1/2 TO 2 INCHES, AND SHALL NOT CHAR AT A TEMPERATURE LESS THAN 675 DEG. F.. THE CONDUCTIVE FIBER SHALL BE A NYLON SHEATHED CARBON CORE FIBER AND SHALL BE 3 DENIER PER FILAMENT AND 1/1/2 INCHES TO 2

INCHES IN STAPLE LENGTH (SEE 6.4)."

PAGE 5, PARAGRAPH 3.4, LINE 3, AFTER "(SEE 6.6)" ADD "OR FOLIAGE GREEN 504".

PAGE 10, PARAGRAPH 3.13, PH., LINE 2: AFTER "8.0" DELETE "AND".

PAGE 10, PARAGRAPH 3.13, PH., LINE 3: AFTER "8.5" ADD "AND FOR THE TYPE IV CUFFS AND CLOTH

SHALL NOT BE LESS THAN 5.0 NOR MORE THAN 8.0".

PAGE 12, TABLE IV. COMPONENT TESTS UNDER TEST METHOD COLUMN, LINE 6 DELETE "1600" AND

SUBSTITUTE "AATCC 20".

PAGE 23, PARAGRAPH 6.4: DELETE IN ITS ENTIRETY AND SUBSTITUTE THE FOLLOWING:

"6.4 TYPE IV FIBER BLEND. THE FINISHED CLOTH AND CUFF FIBER BLEND HAS BEEN SUCCESSFULLY MANUFACTURED WITH YARNS PRODUCED FROM AN INTIMATE FIBER BLEND OF 92 PERCENT NOMEX, 5 PERCENT KEVLAR AND 3 PERCENT P-140. THE FIBER BLEND IS AVAILABLE IN BALE FORM FROM E.I.

DUPONT DE NEMOURS & CO. INC., WILMINGTON, DE. 19880."

ELECTROSTATIC DECAY TESTING IS NOT REQUIRED FOR THIS CUFF.

(ref. T0941 - 5/23/06)

MIL-DTL-10176L Cloth, Gabardine: Wool, Polyester and Wool dated 30-Mar-2018

SPONGING:

COLD WATER SPONGING IS REQUIRED. A PROPER ALCOHOL WETTING AGENT SHALL BE USED TO INSURE SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT FINISH (when specified) IS NOT RELEASED.

THE WATER REPELLANT TREATMENT (When Specified) SHALL BE APPLIED BEFORE THE SPONGING

OPERATION.

WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE CLOTH SHALL BE PIECE DYED.

ADDITIONAL INFO FOR MIL-P-15011: NO ADDITIONAL INFORMATION FOLLOWS.

INTERIM CHANGES TO A-A-55126B,

THE FOLLOWING CHANGES ARE FOR ALL CURRENT, PENDING AND FUTURE PROCUREMENTS OF THE

SUBJECT DOCUMENT UNTIL SUCH TIME AS THE DOCUMENT IS AMENDED OR REVISED.

PAGE 4. TABLE I, PHYSICAL REQUIREMENTS, CHARACTERISTIC, SHEAR STRENGTH,DELETE LBS/SQ INCH

(MIN), ADD SHEAR STRENGTH, LBS/2 SQ INCH (MIN).

PAGE 5 TABLE II, PHYSICAL REQUIREMENTS; CHARACTERISTIC, LENGTH

DIMENSIONAL STABILITY, % (MAX); LOOP, ALL CLASSES DELETE .0; ADD ALL CLASSES 4.0.

PAGE 7, Paragraph 3.10.2, Change the following title of paragraph from: "Fray resistance of Universal Camouflage Shades" and replace with "Fray resistance of Camouflage Prints"

PAGE 14, Paragraph 7.3.4 Change the following title of paragraph from: Fray resistance for Universal Camouflage Shades." and replace with "Fray resistance for Camouflage Prints."

INTERIM SPECIFICATION CHANGES TO MIL-C-21852F:

PAGE 1, CLASSIFICATION. PARA. 1.2, LINE 5 UNDER

"TYPE III", DELETE "2.0" AND SUBSTITUTE "1.8" AND

DELETE "68" AND SUBSTITUTE "61".

PARAGRAPH 3.4, TABLE I. PHYSICAL REQUIREMENTS.

UNDER "TYPE III", "WEIGHT" REQUIREMENT, DELETE

"2.0 (68)" AND SUBSTITUTE "1.8 (61)".

PAGE 13, PARA.4.5.4 SPECTRAL REFLECTANCE TEST.

LINE 4, DELETE "HALON" AND SUBSTITUTE

"POLYTETRAFLUOROETHYLENE (PTFE)".

(ref. T1036 - May 19, 2006)

A-A-52016A Cloth, Twill or Plain Weave, Polyester & Polyester Blend dated 19 Nov 2019

No Additional Information (ref. T1514)

ADDITIONAL INFORMATION FOR MIL-C-44192:

INTERIM CHANGES TO MIL-C-44192:

PAGE 4, PARA 3.2.4 AFTER "II" ADD "FOR DRESS

COATS AND TYPE "III" FOR ALL WEATHER COATS."

PAGE 11, PARA 30.4, DELETE AND SUBSTITUTE:

"30.4 CONTAINER CLOSURE. THE CONTAINER SHALL BE

CLOSED BY THE USE OF 3 INCH WIDE TAPE CONFORMING

TO TYPE II, CLASS 2 OF PPP-T-45. THE TAPE SHALL

BE CENTERED OVER EACH EXPOSED SEAM INCLUDING

THE DISPENSING DOOR SLITS AND EXTENDED OVER ALL

THE CORNERS AND EDGES WITH A MINIMUM OF 2 INCHES

ONTO THE ADJACENT BOX PANELS. THE MANUFACTURERS

JOINT AND THE EDGES AROUND THE BOTTOM OPENING

OF THE LID AFTER IT IS PLACED OVER THE

CONTAINER BOX BODY NEED NOT BE TAPED.".

NOTE: WHEN HANGER PACKS ARE SPECIFIED FOR ALL-

WEATHER COATS, COATS SHALL BE PACKAGED, MARKED

AND PALLETIZED IN ACCORDANCE WITH MIL-C-44192,

WITH FRONTS LAPPING AND BUTTONED.

THE FOLLOWING APPLIES:

TEN (10) COATS OF ONE CLASS AND SIZE SHALL BE

PACKED IN A TYPE I CONTAINER (HANGER PACK)

EXCEPT THAT THE DIMENSIONS OF THE CONTAINER

SHALL APPROXIMATE 24 X 21 INCHES AND THE DEPTH

OF THE CONTAINER SHALL BE 48 +0/-2 INCHES.

HANGER PACK SHIPPING CONTAINERS SHALL BE

MARKED A/C TO IDENTIFY THE LEVELS OF PACKAGING/

PACKING.

(Ref. T0806)

ADDITIONAL INFORMATION FOR MIL-C-44296:

INTERIM SPECIFICATION CHANGES TO MIL-C-44296A:

PAGE 1, PARAGRAPH 1.1, SCOPE., LINE 1: AFTER "AND" INSERT "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2, LINE 12: BETWEEN "TYPE X-CIRCULAR KNIT SUBSTRATE" AND "CLASS 1"

INSERT "TYPE X1- "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2. CLASSIFICATION. BELOW "TYPE IX" ADD "TYPE X - CIRCULAR KNIT SUBSTRATE"

PAGE 2, PARAGRAPH 2. APPLICABLE DOCUMENTS ADD FOLLOWING NEW PARAGRAPH: "2.1.3 OTHER

PUBLICATIONS. THE FOLLOWING DOCUMENTS FORM A PART OF THIS DOCUMENT TO THE EXTENT

SPECIFIED HEREIN. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS WHICH ARE DOD ADOPTED SHALL BE THOSE LISTED IN THE ISSUE OF THE DODISS SPECIFIED IN THE SOLICITATION.

UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS NOT LISTED IN THE DODISS SHALL BE

THE ISSUES OF THE NONGOVERNMENT DOCUMENTS WHICH ARE CURRENT ON THE DATE OF THE

SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC 20 - FIBER ANALYSIS QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC), P.O. BOX 12215, TRIANGLE PARK, NC 27709-2215)"

PAGE 3, ADD THE FOLLOWING NEW PARAGRAPH: "3.1.2.10 TYPE X. TYPE X SHALL BE A CIRCULAR KNIT.

WHEN SPECIFIED (SEE 6.2), THE FACE SIDE SHALL BE NAPPED."

PAGE 3: AFTER PARAGRAPH 3.1.2.10,ADD THE FOLLOWING: "3.1.2.11 TYPE X1. TYPE X1 SHALL BE STITCH- REINFORCED NONWOVEN WHEREBY A SERIES OF CHAINSTITCHING IS SEWN IN THE MACHINE

DIRECTION OF THE SUBSTRATE IN ORDER TO REINFORCE THE NONWOVEN CONSTRUCTION."

PAGE 7, PARAGRAPH 3.4. PHYSICAL REQUIREMENTS. ADD THE FOLLOWING NEW TABLE AFTER TABLE

VII:

"TABLE VII. A PHYSICAL REQUIREMENTS FOR TYPE X

STYLE CLASS WEIGHT (INCLUDING BURSTING

ADHESIVE) STRENGTH

OZ/SQ/YD. LBS. (MIN.

MINIMUM MAXIMUM

A 1,2,3 OR 4 1.4 1.8 60

FIBER CONTENT

1/

1/ 100% NYLON OR POLYESTER."

PAGE 7,PARAGRAPH 3.4 PHYSICAL REQUIREMENTS.: AFTER TABLE"V111" ADD NEW TABLE 1X:

"TABLE 1X,PHYSICAL REQUIREMENTS FOR TYPE X1

BREAKING STRENGTH

WGT, OZ/YD2 LBS, (MIN) STITCHING

STYLE CLASS MIN MAX MACH X-MACH CONTENT REIN

FORCEMENT

A 1,2,3 1.0 1.8 10.0 1.0 1/ 2/

1/ 50 TO 100 PERCENT POLYESTER WITH REMAINING PERCENTAGE NYLON OR RAYON.

2/ STITCH REINFORCEMENT CONDUCTED WITH SINGLE MULTIFILAMENT THREAD USING CHAINSTITCH

STITCH TYPE WITH CHAINSTITCH LOOPS ON FUSIBLE SIDE TO PROTECT FROM UNRAVELING."

PAGE 7, PARAGRAPH 3.4.1. BONDING STRENGTH.

- LINE 2, DELETE "(EXCEPT CLASS 5)" AND SUBSTITUTE "(EXCEPT TYPE IX WHEN USED AS FUSIBLE SEAM

TAPE AND CLASS 5)".

- LINES 7 AND 8, DELETE "OR SHEETING MATERIAL".

PAGE 9, PARA. 4.2.2.1, LINE 22, DELETE "30" AND SUBSTITUTE "20". LINE 24, DELETE "45" AND

SUBSTITUTE "30".

PAGE 11, TABLE VIII. END ITEM TESTS UNDER TEST METHOD COLUMN, LINES 2 AND 3 DELETE "1600"

AND SUBSTITUTE "AATCC 20".

PAGE 12, PARAGRAPH 4.3.1.1. BONDING STRENGTH PROCEDURE (INITIAL AND AFTER LAUNDERING/DRY CLEANING). DELETE THE FIRST AND SECOND SENTENCES IN THEIR ENTIRETY AND SUBSTITUTE: "CUT A 12 INCH WARP BY 11 INCH FILLING SAMPLE FROM BOTH THE OUTERSHELL AND FUSIBLE MATERIALS

SPECIFIED FOR CONTRACT USE (SEE 6.5)."

PAGE 15: AT THE END OF PARAGRAPH 6.1.1,ADD THE FOLLOWING:

" E. STITCH REINFORCED NONWOVEN TYPE X1 OFFERS HIGH DEGREE STRENGTH/STABILIZATION FOR TAPE AND STAY APPLICATION FOR LARGE OR SMALL PART FUSIBLES AND IS INTENDED TO PROVIDE

VERTICAL STABILITY AND ABRASION RESISTANCE."

PAGE 16, PARAGRAPH 6.5. BONDING STRENGTH DISPUTE PROCEDURE. INSERT THE FOLLOWING

BETWEEN THE FIRST AND SECOND SENTENCES: "IN SOME CASES, OUTERSHELL SAMPLES

REPRESENTATIVE OF SEPARATE PRODUCTION LOTS MAY BE USED TO DETERMINE IF DIFFERENT

FINISHES MAY AFFECT BONDING STRENGTH."

(ref. T0998 - 5/23/06)

FED-STD-191A THE FEDERAL STANDARD FOR

. TEXTILE TEST METHODS.

. 20 JULY 78.

TEST METHOD 5781:

OPACITY PF TEXTILE MATERIALS TO LIGHT OF

VISIBLE WAVELENGTHS.

TEST METHOD 5874:

TEMPERATURE, LOW; EFFECT ON COATED CLOTH

TEST METHOD 5972:

STRENGTH OF COATING; WATER RESISTANCE METHOD

EACH BUNDLE OF LACES CONSTITUTES A UNIT PACK,

AND SHALL BE TAGGED WITH THE INFORMATION RE-

QUIRED BY MIL-STD-129 FOR THE UNIT PACK.

ITEMS PACKED AS SPECIFIED SHALL BE PALLETIZED ON A 4-WAY ENTRY PALLET IN

ACCORDANCE WITH LOAD TYPE IA OF MIL-HDBK-774, EACH PREPARED LOAD SHALL

BE BONDED WITH HORIZONTAL, PRIMARY AND SECONDARY STRAPS (BONDING METHODS

C & D) OR FILM BONDING METHODS F OR G. PALLET PATTERN SHALL BE IN

ACCORDANCE WITH THE APPENDIX OF MIL-HDBK-774. THE PALLET SHALL BE

4-WAY, TYPE I, CLASS 1, STYLE 1, SIZE A, WOOD GROUP I, II, III OR IV OF

MIL-P-15011, OR, 4-WAY, TYPE IV, V OR VIII, CLASS 1, STYLE A, SIZE 2,

WOOD GROUP I, II, III OR IV, GRADE A OF NN-P-71.

IF THE CONTAINER IS OF A SIZE WHICH DOES NOT CONFORM TO ANY OF THE

PATTERNS SPECIFIED IN MIL-HDBK-774, THE PALLET PATTERN USED SHALL BE

APPROVED BY THE CONTRACTING OFFICER. EACH PALLET LOAD SHALL

CONTAIN THE SAME NUMBER OF CARTONS.

MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR

SHIPMENT AND STORAGE

DATED: 27 SEPTEMBER 2019

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL)

SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS

"PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E w/CHANGE 2

27 JUNE 2019

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS