SPBN253103 Install Vehicle Barriers.pdf
PDF 182 KB Posted
- Solicitation number
- BD-26-1069-MILDV-40000-119512
- Issued by
- Barnstable County, Massachusetts
About this file
This is a Request for Proposal (RFP) issued by the 102d Intelligence Wing (IW) of the Department of the Air Force at Otis Air National Guard Base in Massachusetts, seeking a contractor to install anti-terrorism (AT) measures focused on protecting against vehicle-borne threats. The project involves installing arresting cables and vehicle guard rails at various base locations, with specific technical requirements including retrofitting steel cable reinforcing and installing new steel cable guardrails. The RFP provides detailed specifications for cable installations, such as utilizing 2-3 cables at ¾-inch diameter with specific anchoring and positioning requirements, and includes multiple bid options for different perimeter sections (Base Bid and Options 1-4).
The contractor proposal must include comprehensive pricing covering all associated costs including materials, labor, equipment, transportation, and storage. The project will follow Unified Facilities Criteria (UFC) and adhere to State, Federal, and local installation codes, with UFC guidelines taking precedence in case of conflicts. The base bid covers approximately 1,010 linear feet with 12 Deadman blocks for the outer perimeter of B104, with additional optional sections available for bidding. Contractors are required to field verify all measurements, and technical details for installation are referenced in Attachment 2, which provides UFC 4-022-03 Security Fences and Gates documentation dated 1 October 2013.
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
1 0 2 D INTELLIGEN CE WI N G (ACC )
OTIS AIR N ATION AL GUARD B ASE MASSACH USETTS
10 JULY 2025
MEMORANDUM FOR MS. MICHAELA A. KOCHKA
FROM: 102d CES/BCE
SUBJECT: REQUEST FOR PROPOSAL, INSPECT & CERTIFY FIRE PROTECTION SYSTEM,
B149, B156, B162
1. The 102d Intelligence Wing (IW) has a requirement to install anti-terrorism (AT) measures in various locations. Specifically, the AT measures addressed in this RFP will protect against vehicle-borne threats. To do so, this RFP will entail installation of arresting cables and vehicle guard rails.
2. The Department of Defense (DoD) utilizes the Unified Facilities Criteria (UFC) as its building code, which refers to the latest version of the IBC. In addition to UFC guidance, the contractor shall adhere to all State, Federal, and local installation codes. Where State and Federal code differ from UFC guidance, the UFC shall be the standard followed. UFC guidance can be found at the following website:
https://www.wbdg.org/dod/ufc
3. Refer to Attachment 1, Barrier Locations, for information regarding locations.
4. For installation details, refer to Attachment 2, UFC 4-022-03, Security Fences and Gates, dated 1
October 2013.
a. Section 2-11 refers to fencing reinforcement.
b. Applicable drawings and notes are at the end of the UFC, pg. 66 of 83 in attachment.
c. Drawing # UFC-710, 711, 712, 713 show further notes & details regarding fencing hardware.
5. The contractor proposal shall include all cost associated with material, labor, equipment, transportation, storage, GAOH, and any other items necessary to provide the following:
a. Retrofit Steel Cable Reinforcing.
i. Utilize 2 cables @ ¾-in diameter and 200-ft anchoring.
ii. Main concerns:
1. Deadman blocks spaced no greater than 200 LF.
2. Cables located on ATTACK side of fence.
3. Deadman blocks located on INSIDE of fence.
4. Cable size, vertical spacing, tensioning.
b. Install New Steel Cable Guardrails.
i. Utilize 3 cables @ ¾-in diameter with 3” vertical spacing.
ii. Main Concerns:
1. Posts should be embedded in 2’-6” minimum depth concrete and conform to AASHTO guidelines for cable rails.
a. Per UFC 4-022-02, standard highway guardrails are sufficient for vehicle barriers.
6. Provide pricing for options listed below. Refer to Attachment 1 for location details. All measurements are approximate. Contractor shall field verify.
a. Base Bid: Outer Perimeter, B104, Attachment 1, Fence Sections A, B, C, D.
i. Approx. 1,010 LF, 12 Deadman Blocks
b. Option 1: Inner Perimeter, B104, Attachment 1, Fence Section E.
i. Approx. 600 LF
c. Option 2: Outer Perimeter, Attachment 1, Fence Sections F.
d. Option 3: Outer Perimeter, Attachment 1, Fence Sections G.
e. Option 4: Outer Perimeter, Attachment 1, Fence Sections H.
7. Direct any questions or concerns regarding this memorandum to Maj Vincent J. Tripodi by email at vincent.tripodi.1@us.af.mil or by telephone at 508-968-4238.
VINCENT J. TRIPODI, Maj, USAF Base Civil Engineer
Distribution:
1. Ms. Michaela Kochka, State KO
Attachments:
1. Attachment 1, Barrier Locations
2. Attachment 2, UFC 4-022-03, Security Fences and Gates
| 2025-07-16T10:43:36-0400 | |
| TRIPODI.VINCENT.JOSEPH.1256562266 |
File details come from the government source that posted it. Updated .