Attachment_2_-_Salient_Characteristics_and_Test_Plan.pdf

Salient Characteristics for Request for Quote # SP7000-16-Q-0046:

1. Device must be able to print labels which are compliant with both the Occupational Safety and Health Administration’s (OSHA) Hazard Communication Standard Final Rule and the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). For more information visit https://www.osha.gov/dsg/hazcom/index.html.

2. Device must be same as or equal to Kyocera FS-C5250DN Color printer.

3. Device must print a minimum of 26ppm (Pages Per Minute) simplex in color and black and white on A4 Paper.

4. Device must support Power at 115V/60Hz. and 220V/50Hz. on a single device

(capable of switching between the two) or separate dedicated devices (one Model supports 115v and another supports 220v). 220v is for oversea applications.

5. Average Monthly duty cycle maximum is at least 65,000 pages per month.

6. Device must have embedded network (TCP/IP over Ethernet) networking ability comparable to FS-C5250DN.

7. Device must have embedded USB connection comparable to FS-C5250DN.

8. Device must support the Prescribe Language for DSS printing of Barcodes on

9. Device must support Line Emulation and PCL printing.

10. Device must be able to operate in various environments which could have heat in excess of 100 degrees, dust and sand particles, and humid conditions (i.e., warehouses, tents).

11. Device must be able to be configured from a console located on the device.

12. Device must be able to be configured from Web Interface.

13. Device must support SNMPv3 (Simple Network Management Protocol).

14. Device must support LDAP (Lightweight Directory Access Protocol) Print (Port 515) (Mainframe printing).

15. Device web interface must be able to lock with password.

16. Device web interface must support SSL (Secure Sockets Layer).

17. If device has FTP (File Transfer Protocol), this should be able to be disabled.

18. Device Firmware must be able to update over Ethernet Network.

Device Testing Plan:

After award of order and receipt of devices, the following testing shall take place to ensure conformance with the requirements set forth in this solicitation:

1. Device will be configured to STIG (Security Technical Implementation Guide) and have IA (Information Assurance) scans run on device. This will check for vulnerabilities with the OS (Operating System).

2. Device will be put into a test environment where printing of 30+ forms will be completed and compared with existing print devices. Forms will cover text-based print, graphics based print, and Barcode Printing on both port 515 (LPD Mainframe print), and port 9100 (Windows based print - RAW).

SP7000-16-Q-0046 Attachment 2: Salient Characteristics and Test Plan Page 1 of 2 https://www.osha.gov/dsg/hazcom/index.html

3. After the printer has successfully completed all prior phases of testing, it will then be placed into the production environment. A demonstration of the printer performing in the real world application environment will take place for a period of no longer than two days to ensure the printer can function properly for its intended purpose.

4. The printer must successfully complete all phases of this test plan in order pass and be considered conforming to the requirements of this solicitation and the subsequent purchase order.

SP7000-16-Q-0046 Attachment 2: Salient Characteristics and Test Plan Page 2 of 2