3-1689_-_19001_-__SHT_4_OF_5_-_Repair_Exterior_and_Interior_Vestibule_Entrance_Doors,_Bldg._20,_FY19-SHT__4.pdf

AutoCAD SHX Text

FOR EXTERIOR DOORS - FORMED OF TWO PIECES OF CLEAR TEMPERED

AutoCAD SHX Text CONDITION A, TYPE I, CLASS 1, QUALITY q8, 0.25 INCH THICK; TOTAL

AutoCAD SHX Text

THICKNESS = 1" AND GANA STANDARDS MANUAL DESIGNATION ON THE

AutoCAD SHX Text G

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text CONDITION A, TYPE I, CLASS 1, QUALITY q8, 0.25 INCH THICK AND GENA

AutoCAD SHX Text

STANDARDS MANUAL DESIGNATION ON THE DRAWING SHEET IS G/10.

AutoCAD SHX Text G

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

FOR INTERIOR DOORS - ASTM C 1048, KIND FT (FULLY TEMPERED),

AutoCAD SHX Text

GLASS CONFORMING TO ASTM C 1048, KIND FT (FULLY TEMPERED),

AutoCAD SHX Text

DRAWING SHEET IS G/9.

AutoCAD SHX Text

%%UGLASS TYPES

AutoCAD SHX Text

SECTION D

AutoCAD SHX Text D

AutoCAD SHX Text

SECTION A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

SECTION B

AutoCAD SHX Text

SECTION C

AutoCAD SHX Text

HEAD

AutoCAD SHX Text

STILE

AutoCAD SHX Text

SILL

AutoCAD SHX Text

SECTION E

AutoCAD SHX Text

JAMB

AutoCAD SHX Text E

AutoCAD SHX Text

MIDDLE RAIL

AutoCAD SHX Text G

AutoCAD SHX Text

AutoCAD SHX Text

INTERIOR

AutoCAD SHX Text G

AutoCAD SHX Text

EXTERIOR

AutoCAD SHX Text

DOORS

AutoCAD SHX Text

SEE DETAIL B/4 ON

AutoCAD SHX Text

AutoCAD SHX Text

THIS SHEET.

AutoCAD SHX Text

TOP OF DOOR FRAME 2 " 12"

AutoCAD SHX Text

DOOR FRAME

AutoCAD SHX Text

SEE DETAIL C/4

AutoCAD SHX Text

DOOR

AutoCAD SHX Text

FRAME

AutoCAD SHX Text

SIDE OF DOOR FRAME 2 " 12"

AutoCAD SHX Text

ON THIS SHEET

AutoCAD SHX Text FOR (2) INTERIOR DOORS B137NB AND B138NB - STAINLESS STEEL WITH G/10 GLASS TYPE AS INDICATED ON THIS SHEET.

AutoCAD SHX Text

AND MAIN VESTIBULE ENTRANCE AREAS AS INDICATED ON SHEET. 2 OF 5.

AutoCAD SHX Text A. BLDG. 20 - FOR (2) EXTERIOR DOORS - B137NA AND B138NA - STAINLESS STEEL WITH G/9 GLASS TYPE AS INDICATED ON THIS SHEET.

AutoCAD SHX Text

(4) TOTAL S.S. MONUMENTAL WIDE STILE DOORS TO BE INSTALLED AT POD B MAIN LOBBY

AutoCAD SHX Text

%%UBLDG. 20 NOTES

AutoCAD SHX Text

FRAMES ARE TO BE KYNAR FINISH TO MATCH VESTIBULE AND KITCHEN WALLS.

AutoCAD SHX Text

B. BLDG. 20 - ALL OTHER MONUMENTAL WIDE STILE DOORS LISTED IN THE DOOR

AutoCAD SHX Text

SCHEDULE ON SHEET 2 OF 5 ARE TO BE ALUMINUM DOORS AND FRAMES. DOORS AND

AutoCAD SHX Text

%%UBLDG. 21 NOTES

AutoCAD SHX Text

AND FRAMES ARE TO BE KYNAR FINISH TO MATCH VESTIBULE WALLS.

AutoCAD SHX Text

A. BLDG. 21 - ALL (11) EXTERIOR MONUMENTAL WIDE STILE DOORS LISTED IN THE DOOR

AutoCAD SHX Text SCHEDULE ON SHEET 3 OF 5 ARE TO BE ALUMINUM DOORS AND FRAMES WITH G/9 GLASS TYPE AS INDICATED ON THIS SHEET. DOORS

AutoCAD SHX Text

1. ALUMINUM FRAME

AutoCAD SHX Text

WITH KYNAR FINISH

AutoCAD SHX Text

NOTE:

AutoCAD SHX Text

DOOR FRAME SEE NOTE 1

AutoCAD SHX Text

DOOR FRAME SEE NOTE 1

AutoCAD SHX Text

DLA ENTERPRISE SUPPORT

AutoCAD SHX Text

DESIGNED BY:

AutoCAD SHX Text Approved by:

AutoCAD SHX Text Sheet of

AutoCAD SHX Text Sheet

AutoCAD SHX Text reference

AutoCAD SHX Text number:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text Appr.

AutoCAD SHX Text Mark

AutoCAD SHX Text

DEFENSE LOGISTICS AGENCY

AutoCAD SHX Text

DEFENSE SUPPLY CENTER COLUMBUS

AutoCAD SHX Text

COLUMBUS, OHIO 43218-3990

AutoCAD SHX Text

FACILITIES ENGINEERING OFFICE

AutoCAD SHX Text

BUILDING 308

AutoCAD SHX Text

INSTALLATION MANAGEMENT DIVISION

AutoCAD SHX Text Reviewed by:

AutoCAD SHX Text Reviewed by:

AutoCAD SHX Text Date:

AutoCAD SHX Text Date:

AutoCAD SHX Text Date:

AutoCAD SHX Text Date:

AutoCAD SHX Text

PROJECT

AutoCAD SHX Text

CSC-19001

AutoCAD SHX Text

REPLACE EXTERIOR ENTRANCE DOORS,

AutoCAD SHX Text 3-1689

AutoCAD SHX Text

AutoCAD SHX Text

GARY JOHNSON

AutoCAD SHX Text

M. RUSTAM ALI

AutoCAD SHX Text

DF-FCO (SAFETY)

AutoCAD SHX Text

FACILITIES ENGINEER

AutoCAD SHX Text

DF-FCS (SECURITY)

AutoCAD SHX Text Approved by:

AutoCAD SHX Text

DF-FCE (ENVIRONMENTAL)

AutoCAD SHX Text Date:

AutoCAD SHX Text Plot Date:

AutoCAD SHX Text Date:

AutoCAD SHX Text

PROJECT COORDINATE

AutoCAD SHX Text

PROJECT ENGINEER

AutoCAD SHX Text

ENGINEERING TECHNICIAN

AutoCAD SHX Text Submitted by:

AutoCAD SHX Text

CHIEF, DF-FCIE

AutoCAD SHX Text

29 AUG 18

AutoCAD SHX Text

DF-FCI

AutoCAD SHX Text

BLDGS. 20 & 21

AutoCAD SHX Text

AutoCAD SHX Text

DOOR ELEVATION, SECTIONS AND NOTES

AutoCAD SHX Text BLDG. 21 SCOPE OF WORK: 1. SCOPE OF WORK INCLUDES REPLACEMENT OF DOOR FRAMES DOORS, HANDICAPPED OPERATORS AND CLOSURES AT THE WEST AND EAST, NORTH AND ENTRANCES OF POD A, B, & C, SEE ELEVATION A/4 FOR DOOR AND FRAME SECTIONS AND SECTION B AND ELEVATION A/4 FOR VIEW OF MULLION HEAD/JAMB, AND SILL SECTIONS ON SHEET 4 OF 5. 2. CONTRACTOR IS TO REMOVE EXISTING EXTERIOR DOORS AND ASSOCIATE FRAMES OF THE NORTH, EAST, WEST, AND SOUTH ENTRANCES AND INSTALL NEW DOORS AND FRAMES. SEE ELEVATION A/4 ON SHEET 4 OF 5. 3. MANUFACTURE SELECTION OF COLOR AND MATERIAL ARE TO MATCH EXISTING AND SHALL BE APPROVED BY THE CONTRACTING OFFICER. 4. IF AT ANY POINT THE CONTRACTOR DISCOVERS AN ERROR ON THIS CONSTRUCTION DRAWING AND THE ACTUAL FIELD CONDITIONS, NOTIFY THE GOVERNMENT INSPECTOR OF THE ERROR AND RECOMMENDED SOLUTION. 5. IF CONTRACTOR HAS RECOMMENDED SOLUTIONS THAT ARE NOT PART OF THIS CURRENT CONSTRUCTION DRAWING, CONTACT THE GOVERNMENT INSPECTOR WITH PROPOSED SOLUTION FOR REVIEW BY ENGINEERS. 6. CONTRACTOR SHALL REMOVE ALL MAGNETIC AND ELECTRONIC SECURITY DEVICES, WIRES AND ELECTRONIC DEVICES. REINSTALL WIRES, WIRING TO HOOKUP ALL ELECTRONIC DEVICES AFTER COMPLETION OF NEW DOOR FRAMES AND DOOR COVERS INSTALLATION. CONTRACTOR SHALL PERFORM TESTS TO ENSURE PROPER OPERATION OF ALL ELECTROMAGNETIC LOCK DEVICES.

AutoCAD SHX Text GENERAL NOTES: 1. EXISTING FLOORING SHALL BE COVERED WITH PLASTIC SHEET OR EXISTING FLOORING SHALL BE COVERED WITH PLASTIC SHEET OR GROUND CLOTH DURING CONSTRUCTION. ENSURE THAT NO DAMAGES TO TERRAZZO FLOORING SEGMENTS. 2. DIMENSIONS/SITE CONDITIONS SHALL BE VERIFIED BY CONTRACTOR. DIMENSIONS/SITE CONDITIONS SHALL BE VERIFIED BY CONTRACTOR. 3. AT NO TIME SHALL MORE THAN ONE EXIT OR ONE HALLWAY BE AT NO TIME SHALL MORE THAN ONE EXIT OR ONE HALLWAY BE BLOCKED DUE TO THE AMOUNT OF PERSONNEL THAT WOULD NEED TO EXIT THE FACILITY IN THE EVENT OF AN EMERGENCY. COMPLY WITH NFPA 101-4.6.11. CONTRACTOR MAY WORK (1) DOOR ON EACH BUILDING SIMULTANEOUSLY. 4. ENSURE CONSTRUCTION OPERATIONS COMPLY WITH NFPA 241 ENSURE CONSTRUCTION OPERATIONS COMPLY WITH NFPA 241 SAFEGUARDING CONSTRUCTION, ALTERATION, AND DEMOLITION OPERATIONS. 5. CONTRACTOR TO SUBMIT A SEQUENCE/SCHEDULE OF ENTRANCE CONTRACTOR TO SUBMIT A SEQUENCE/SCHEDULE OF ENTRANCE CLOSURE TO THE COR.

AutoCAD SHX Text SPECIAL NOTE: : 1. ALL WORK SHALL BE ACCOMPLISHED BETWEEN THE HOURS 0600 TO 1730 AND CONTRACTOR NEED ESCORT IN BLDG. 21. 2. THE CONTRACTOR SHALL PROVIDE SAFETY DATA SHEETS (SDS) FOR ALL GLUES, PAINTS, CAULKING, AND SEALANTS USED. 3. TOOLS, MATERIALS, GLUES, ETC, SHALL BE ORGANIZES AT THE END OF EACH WORK DAY. 4. ALL REMOVED DOORS AND FRAMES ARE TO BE RECYCLED.

AutoCAD SHX Text

DETAIL - DOOR ELEVATION

AutoCAD SHX Text N.T.S

AutoCAD SHX Text BLDG. 20 SCOPE OF WORK: 1. SCOPE OF WORK INCLUDES REPLACEMENT OF DOOR FRAMES, DOORS, HANDICAPPED OPERATORS AND CLOSURES AT THE NORTH, EAST, WEST, AND SOUTH ENTRANCES OF POD A, B, C, & D. SEE ELEVATION A/4 FOR DOOR AND FRAME SECTIONS AND SECTION B AND ELEVATION A/4 FOR VIEW OF MULLION HEAD/JAMB, AND SILL SECTIONS ON SHEET 4 OF 5. 2. CONTRACTOR IS TO REMOVE EXISTING INTERIOR AND EXTERIOR DOORS AND ASSOCIATE FRAMES OF THE NORTH, EAST, WEST, AND SOUTH ENTRANCES AND INSTALL NEW DOORS AND FRAMES. SEE ELEVATION A/4 ON SHEET 4 OF 5. 3. MANUFACTURE SELECTION OF COLOR AND MATERIAL ARE TO MATCH EXISTING AND SHALL BE APPROVED BY THE CONTRACTING OFFICER. 4. IF AT ANY POINT THE CONTRACTOR DISCOVERS AN ERROR ON THIS CONSTRUCTION DRAWING AND THE ACTUAL FIELD CONDITIONS, NOTIFY THE GOVERNMENT INSPECTOR OF THE ERROR AND RECOMMENDED SOLUTION. 5. IF CONTRACTOR HAS RECOMMENDED SOLUTIONS THAT ARE NOT PART OF THIS CURRENT CONSTRUCTION DRAWING, CONTACT THE GOVERNMENT INSPECTOR WITH PROPOSED SOLUTION FOR REVIEW BY ENGINEERS. 6. CONTRACTOR SHALL REMOVE ALL MAGNETIC AND ELECTRONIC SECURITY DEVICES, WIRES AND ELECTRONIC DEVICES. REINSTALL WIRES, WIRING TO HOOKUP ALL ELECTRONIC DEVICES AFTER COMPLETION OF NEW DOOR FRAMES AND DOOR COVERS INSTALLATION. CONTRACTOR SHALL PERFORM TESTS TO ENSURE PROPER OPERATION OF ALL ELECTROMAGNETIC LOCK DEVICES.

AutoCAD SHX Text A 4

AutoCAD SHX Text B 4

AutoCAD SHX Text

DETAIL - TEMPERED GLASS FOR VESTIBULE DOORS

AutoCAD SHX Text C 4

AutoCAD SHX Text

DETAIL - DOOR FRAME