Attachment 07 - 8135-00-926-8991 - IPD.pdf
PDF 48 KB Posted
- Attached to
- SP330026Q5001 - Multiple Award LTC, Cush Pack
- Solicitation number
- SP330026Q5001
- Issued by
-
Defense Logistics Agency Distribution
About this file
This is a General Services Administration (GSA) Item Purchase Description for cushioning material used in packaging applications. The item is classified under NSN 8135-00-926-8991 and is maintained by the GSA's Office Supplies & Administrative Services Acquisition Center located at 26 Federal Plaza, Room 19-166, New York, NY 10278.
The specified product is flexible closed-cell plastic film cushioning material conforming to Federal Specification PPP-C-795D (dated June 13, 1994), classified as Class 1 Regular. Each roll measures 24 inches in overall width, 250 feet in overall length per roll, and 0.500 inches in thickness. The material is provided in bundles of 2 rolls per package. The product is not rated for water absorbency, does not include water resistance quality, longitudinal compression, flame resistance, or fungus resistance features. Packaging requirements mandate that bundles be packed according to normal commercial practice to ensure acceptance by common carriers and protection against damage during multiple shipments and storage, with shipping containers not exceeding 51 pounds in weight and complying with National Motor Freight Classification and Uniform Freight Classification standards. Contractors must certify that products contain a minimum of 30 percent recovered plastic, including at least 15 percent post-consumer recovered plastic in accordance with the current version of Federal Specification PPP-C-795. All marking must comply with FED-STD-123H for civilian destinations and MIL-STD-129R for military destinations, with bar code marking required for both. Quality assurance requirements mandate uniform fabrication free from cracks, cuts, holes, dirt, contamination, or other defects that would impair usefulness, with product quality equal to or better than commercial market standards.
View the file
Other files
Show all 18
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM PURCHASE DESCRIPTION 8135-00-926-8991 Ver. 14 UI: BD
General Services Administration
2FY - Offc Supplies & Admin.Services Acq.Center
26 Federal Plaza, Room 19 - 166 New York, NY 10278
8135-00-926-8991 UI: BD
CUSHIONING MATERIAL, PACKAGING
DESCRIPTION
I.A.W. FEDERAL SPECIFICATION PPP-C-795D, DATED JUNE 13, 1994.
CUSHIONING MATERIAL, PACKAGING (FLEXIBLE CLOSED CELL PLASTIC FILM, FOR
LONG DISTRIBUTION CYCLES)
ITEM NAME CUSHIONING MATERIAL, PACKAGING
I.A.W. CLASS 1 - REGULAR
OVERALL WIDTH 24.00 INCHES
OVERALL LENGTH 250.0 FEET (PER ROLL)
OVERALL THICKNESS 0.500 INCHES
OVERALL MATERIAL PLASTIC
WATER ABSORBENCY RATING NOT RATED
WATER RESISTANCE QUALITY NOT INCLUDED
LONGITUDINAL COMPRESSION NOT INCLUDED
FLAME RESISTANT FEATURE NOT INCLUDED
FUNGUS RESISTANT FEATURE NOT INCLUDED
UNIT PACKAGE QUANTITY 2 ROLLS PER BUNDLE
PACKAGING/PACKING: Two (2) rolls of packaging cushioning material shall be in a bundle in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage.
The shipping container shall be in compliance with the National Motor
Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.
PACKAGING/PACKING
PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform
Freight Classification, and shall not be more than 51 pounds in weight.
For additional references, see below link:
Printed on: 12/27/2021 19:54:05 Page 1
2FY - Offc Supplies & Admin.Services Acq.Center
26 Federal Plaza, Room 19 - 166 New York, NY 10278 https://vsc.gsa.gov/Marking_Labeling_Packaging/
MARKING
For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.
For additional references, see below link:
FED-STD-123H
https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf
MIL-STD-129R
http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_ MILSTD129R_151007.pdf
PALLETIZATION
PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:
Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment.
Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.
PCM
Printed on: 12/27/2021 19:54:05 Page 2
2FY - Offc Supplies & Admin.Services Acq.Center
26 Federal Plaza, Room 19 - 166 New York, NY 10278
The contractor shall certify that the product offered contains a minimum of 30 % recovered plastic, including a minimum of 15 % post consumer recovered plastic in accordance with the most current version of Federal Specification PPP-C-795.
The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
QUALITY ASSURANCE
PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market.
The government reserves the right to require proof of such conformance.
WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.
Printed on: 12/27/2021 19:54:05 Page 3
File details come from the government source that posted it. Updated .