Final SOW.doc

Attachment 1

STATEMENT OF WORK (SOW)

Place of Performance:

Defense Distribution Center Tobyhanna

Bldg .55, Bay 3

Tobyhanna, PA 18466

Must be equivalent to or greater than the Salient Characteristics of the HOLZMA Panel saw model #HHP 380-3100 listed in the description below.

DESCRIPTION OF REQUIREMENT:

Contract Line Item (CLIN) 0001: Provide and Install (1) Each Panel Saw, Holzma Mode HPP 380-3100 (or Equal), Holzma Model HEE 33/16 (or Equal) as turnkey installation to include: CADPlan JIT software (or equal); six (6) main saw blades; six (6) scoring saw blades; one week additional on-site training provided for government personnel; two (2) sets manuals in hard copy format; on-site installation, to include machinist grout to grout in saw and optilift after installation; rigging; transportation; and one (1) year manufacturer warranty.

SALIENT FEATURES:

GENERAL:

1. 28 horsepower main saw motor;

2. 3 horsepower scoring saw motor;

3. 3.9inch max. opening of clamps;

4. 3.7inch max. projection of main saw blade;

5. 0.426 feet/min. saw carriage speed in the forward direction;

6. 426 feet/min. saw carriage speed in reverse direction;

7. 262 feet/min. program fence speed forward and reverse direction.

Hardware of Cadmatic 4.0 Control:

1. Computer

a. Industrial PC, Intel P-4 2.66 GHz processor;

b. 512 DDR RAM working memory;

c. 40 GB Hard Drive;

d. 1.44 MB 3.5inch floppy disc drive;

e. DVD ROM Drive;

f. ATI Radeon 9700 video graphics card;

g. 4 serial interfaces;

h. 1 parallel interface;

i. 1 Ethernet interface;

j. 1 PCMCIA slot;

k. 17inch flat screen LCD color monitor with Touch Screen;

l. Keyboard connection.

2. PC to provide real-time machine control;

3. 3D graphics;

4. Personalized operator control settings.

Error Diagnostics (part of the Cadmatic 4.0 control system);

1. Errors displayed in plain text;

2. Cadmatic 4.0 maintains file for the last 15 errors to occur on the machine;

3. Steps to correct the error are displayed on the monitor;

4. Photos and videos displayed to show actual location of the error;

5. Modem hardware for remote diagnostics;

6. Maintenance display and tracking prompts operator when saw needs maintenance and tracks dates when maintenance is/was performed.

Saw Carriage:

1. Steel construction;

2. Monorail guide system constructed of chromed and hardened steel guide rods and V-groove rollers;

3. Automatic continuous cutting length adjustment;

4. Automatic continuous cutting length;

5. Cutting speed is variably adjustable from the control panel;

6. Drive is by way of AC servomotor and rack and pinion.

Machine Tables

1. Rear support table with narrow pitch rollers;

2. Air tables at the front of the machine;

3. Machine bed has friction-free plates over the surface;

4. Cutting length is 122 inches;

5. Cutting width is 122 inches;

6. 6 clamps located at 3inch, 11inch, 19inch, 41inch, 73inch, and 104inch;

7. 3 air tables (85inchx 25 ½ inch);

8. 480V/33A;

9. 6inch dust collection connector on pressure beam;

10. 8inch dust collection connector on saw carriage.