SOW OWS B368 - Draft.pdf
PDF 161 KB Posted
- Attached to
- SOURCES SOUGHT - Clarifier Oil Water Separator Federal contract opportunity
- Solicitation number
- A049702
About this file
This document is a Statement of Work (SOW) for a Clarifier Oil Water Separator (OWS) project at Malmstrom Air Force Base in Montana, dated 01 May 2025. The SOW specifies the procurement and installation of an SPT-10-E Clarifier Separator System or equivalent for Building 368, with detailed technical requirements including a 1-10 GPM capacity, stainless steel construction, 30-gallon on-board oil storage tank, and advanced coalescing media. The system must have specific features such as stainless steel inclined plates, adjustable pipe skimmers, a 120V disk skimmer with timer, multiple inlet/outlet fittings, and a corrosion protection package with Tnemec 61 interior lining (8-10 mils thick). The project involves purchasing all necessary materials to install and connect the oil water separator in the specified building.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sources Sought.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WT 15023625
STATEMENT OF WORK
Clarifier Oil Water Separator B368
MALMSTROM AIR FORCE BASE, MT
01 May 2025
SECTION 1
DESCRIPTION OF SERVICE
1.1 GENERAL REQUIREMENTS
Provide all items and materials required for the completion of the scope of this project.
1.2 SUMMARY OF WORK
A. Purchase of all material necessary to install and connect oil water separator (OWS) in Building 368
1.3 EQUIPMENT SPECIFICATIONS
• SPT-10-E - Clarifier Separator System or other government approve equal.
o 1-10 GPM Clarifier Separator w/Electric Pump & Control, 120V o Approximate dimensions: 7’L x 2’6” W x 4’-10” H o 1-10 GPM Above Ground Clarifier Oil/Water Separator with Sludge Hopper o Stainless Steel Construction o 30-gallon on-board oil storage tank o Advanced coalescing media designed to remove oil droplets greater than 20 microns with a Reynolds Number of less than 500 to maintain laminar flow o Stainless Steel inclined plates to capture and contain settable solids o Solids storage area o Single adjustable rotatable pipe skimmers and 120V disk skimmer with timer o Neoprene gasketed removable vapor tight cover for access to chamber compartments o 2” Inlet/Outlet- FNPT Fitting and (2) 2” Oil Outlet-FNPT Fitting o (2) 2” Vent NPT Fittings to vent unit outside, (2) 2” Sludge drains and (2) 1” Drain
NPT Fittings o Effluent compartment for pump out o (1) Electric 10 GPM Diaphragm Transfer Pump System with Electric Controller o Gravity drain
• Corrosion Protection Package
Statement of Work – OWS B368 o Separator Interior lined with Tnemec 61, 8-10 mils
File details come from the government source that posted it. Updated .