SOW ISU 90s and reqs -.pdf

DEPARTMENT OF HOMELAND SECURITY

UNITED STATES COAST GUARD

U.S. Coast Guard Maritime Security Response Team, MSRT West (34269) Regional Dive Locker West

1022 Bay Marina Dr.

Suite 106

National City, CA 91950

STATEMENT OF WORK FOR THE PURCHASE OF

1. JUSTIFICATION:

RDLW and RDLE need to purchase ISU 90 shipping containers that are fully customized to rapidly and safely transport the dive lockers full scope of capabilities worldwide.

2. SCOPE OF SERVICES:

Vendor will provide 10 customized ISU-90’s per the following specifications (see table). Shipping, handling and assembly to be included in the quote and components will ship to Regional Dive Locker West and Regional Dive Locker East.

Item # Type Parts Number Description Qty Ordered

1 Sale TBD ISU 90 CLEAN

GEAR

(CHAMBER

SUPPORTING

EQUIPMENT)

2 ea.

2 Sale TBD ISU 90, DIRTY

GEAR

(CHAMBER

2 ea.

RAPIDLY DEPLOYABLE RECOMPRESSION CHAMBER/DIVE SUPPORT ISU-90’S

SCOPE OF WORK FOR US COAST GUARD MSRT WEST

SUPPORT, HIGH

PRESSURE)

3 Sale TBD ISU 90, SCUBA &

SSDS

SUPPORTING

EQUIPMENT

2 ea.

4 Sale TBD ISU 90, (2) F470

INFLATABLE

BOATS

2 ea.

5 Sale TBD ISU 90, SUPPORTING

EQUIPMENT

1 ea.

6 Sale TBD ISU 90 1 ea.

7 Sale 60177001 Kit Tie Down 6 ea.

8 Shipping 99999026 Container Freight to

National City, CA 91950

1 ea.

9 Shipping 99999026 Container Freight to Portsmouth, VA 23703

1ea.

3. DELIVERY LOCATION

REGIONAL DIVE LOCKER WEST

1022 Bay Marina Dr.

Suite 106 National City, CA 91950

REGIONAL DIVE LOCKER EAST

4000 Coast Guard BLVD.

Portsmouth, VA 23703

4. This is a U.S. Government transaction and is tax exempt.

ISU-90 Configuration. RDLW/RDLE

A. RDLW, is looking at ISU-90 One, Two, Three and Four Configuration. (1-4) ISU-90 Total.

B. RDLE, is looking at ISU-90 One, Two, Three, Four, Five and Six Configuration. (1-6) ISU-90 Total.

1. Six ISU-90’s would be configured in the following manor.

a. ISU-90 (One), Clean Gear, ISU-90 used for Chamber support equipment.

i. Side A. Small Parts Cabinets 8-Drawer 86019-009

1. Two chamber tool boxes. See Fig-10

2. Support equipment, parts for the chamber and three Scruber

Canisters. 8-Drawer Cabinet? See Fig-15 and 16

3. Tech Manuals. Two Drawers?

4. Oxygen and HP air charging hoses. See Fig-19

5. Oxygen Kit See Fig-9

6. AED

7. Chamber Kits A and B. See Fig-22

8. TRCS Door (3) Strong Backs See Fig-17

9. TRCS Nato Rig Protectors. See Fig-14

ii. Side B.

1. TRCS TL Patients Skid Fig-13

2. Dive Crews Gear. Four Personnel See Fig-37

3. Mission Gear Load Out. Various

b. ISU-90, (Two), Dirty Gear, used for Chamber Support. High Pressure Compressor, Generator.

i. Side A. Note: heavy equipment is placed on the bottom. Tie-Downs required.

1. Chamber Compressor. See Fig-1

2. Chamber Generator. See Fig-2

a. 440/220 Volts Step down for RCC support See Fig-5

b. Dolly See Fig-36

3. PAM VAN/ISO lifting Slings. See Fig-41

4. PAM VAN Power Cord. See Fig-18

5. PAM VAN Lighting Rod Kit. See Fig-23

ii. Side B.

1. (Two) 5 Gallon Diesel Containers.

2. Lifting Slings for the TRC and TL only. See Fig-29

3. TRC Cover See Fig-30

4. TL Cover See Fig-30

5. (3) TRC Wheels. See Fig-

6. (4) TL Wheels. See Fig-

c. ISU-90, (Three), SCUBA and SSDS Support Equipment.

i. Side A.

1. SCUBA Tanks Racks. Required, four sets of Double Tanks and twelve signal tanks. See Fig-11

2. XLDS Consol See Fig-24

3. (2) XLDS 1 and 2 support boxes. See Fig-28

4. (1) CAOS Rack. See Fig-25

5. (3) 300’ umbilical’s. See Fig-32

6. XLDS Communication. Box See Fig-42

7. XLDS Support Kit. Fig-43

8. Dive Support Tool Kits See Fig-26

9. Dive Accommodation Ladder. See Fig-27

ii. Side B.

1. Dive Personnel gear. Ten See Fig-37

d. ISU-90, (Four), (2) F470 inflatible boats.

i. Side A

1. Boat One

2. Engine

3. Boat Two

4. Boat Engine Two

ii. Boat engine Two

e. ISU-90, (Fifth), Support Equipment.

i. See Fig-3

ii. See Fig-4

iii. See Fig-6

iv. See Fig-7

v. See Fig-8

f. ISU-90, (Sixth), Standard

High Pressure Compressor for Recompression Chamber

Measurements: L47” x W33” x H36”

Weight: 440 lbs.

Fig-1

Generator for Recompression Chamber

Measurements: L44” x W29.5 x H

Weight: ?

Fig-2

Support Equipment RCC Bison Emergency HPU Pumps

Measurements: L28” x W29” x H19.5”

Fig-3

Bison HPU, support equipment for RCC lift system

Measurements: L26” x W31” H23”

Fig-4

440/220 Volts Step down for RCC support

Measurements: L17” x W26” x H45”

Fig-5

Hydraulic QPAK

L55” x W39” x H41” without the wheels

L48” x W41” x H38” with the wheels

Weight: GVRW 960 lbs

Fig-6

Blue Miller Welder

L44” x W31” x H46.5”

Fig-7

Hydraulic Hose Real

L34” x W39” x H42”

Weight: GRWT 465 lbs

Fig-8

Oxygen Kit

L25” x W21” x H9”

Weight: GRWT ? lbs

Fig-9

Two Chamber Toolbox’s. Note: Both kits are the same size.

L24” x W15” x H18.5”

Fig-10

SCUBA Tanks

L26” x W17.5” x H30” Six SCUBA Tanks

Fig-11

Dive First Aid Kit

L32” x W” x H12”

Weight: GRWT lbs

Fig-12

TRCS TL Patients Skid

L58.5” x W23” x H6”

Fig-13

TRCS Nato Ring protectors

L34” x W16” H3”

Fig-14

CO2 Scrubber Canister

Three Canisters L9.5” x C6”

Fig-15

Spare Parts for the Chamber

Several dozen such packages.

Fig-16

TRCS Door Three Strong backs

L28” x W2” x H5”

Fig-17

PAM VAN Power Cord

Fig-18

Oxygen Hoses

Fig-19

Medical Kit

L12” x W8” x H8”

Fig-20

Chamber Supervisor Kit

L20” x W12.5” x H18”

Fig-21

Chamber Primary Kit A and B

L24” x W19” x H12”

Fig-22

Lightning Rod Kit for the PAM VAN

L44” x C5”

Fig-23

XLDS Console

L29” x W27” x H15”

Fig-24

CAOS RACK

L41.5” x W36” x H19”

Fig-25

Dive Tool Kits

L23” x W17” x H 33”

Fig-26

Accommodation Ladder.

Fig-27

(2) XLDS Kit-1 and 2

L34” x W30” H17.5”

Fig-28

Lifting Slings for TRC and TL

Fig-29

(2) Covers for TL and TRC

Fig-30

XLDS Support Hoses and Manifold

Fig-31

(3) XLDS Umbilical’s

L41” x W32” x H16”

Fig-32

General Lines for rigging.

Fig-33

Canopy

L21” x W13” x H65”

Fig-34

Dolly

Fig-36

Dive Crew Bag

L44” x W25” x H17”

Fig-37

TRCS Wheels

(6)

(1)

Fig-38

Dive Streator

Fig-39

Books and Manuals

Fig-40

PAM VAN Lifting Slings

L34” x W30” x H18”

Fig-41

XLDS Communication Box

L15.5 x W13” x H7”

Fig-42

XLDS Support Kit

L17” x W9” x H13”

Fig-43