SOW Attachment 1 - Accessible TTs Designs 4 2023.pdf
PDF 2 MB Posted
- Attached to
- FEMA Accessible Travel Trailers Federal contract opportunity
- Solicitation number
- 70FB8023I00000010
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RFI Accessible TTs Questions and Answers.pdf | ||
| Accessible TT DRAFT SOW Rev 1 23April2023.docx | DOCX document | |
| RFI Accessible TTs 70FB8023I00000010.pdf | ||
| RFI Questions and Feedback Matrix Accessible TTs.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
P R
O J E
C T
N
A M
E
DATEMARK DESCRIPTION
THIS DRAWING SHALL NOT BE USED FOR
CONSTRUCTION UNLESS A PROFESSIONAL SEAL
AND SIGNATURE ARE ON THE DRAWING
STAMP:
THIS PLAN IS APPROVED ONLY FOR WORK AS
INDICATED ON THE APPLICATION SPECIFICATION
SHEET. ALL OTHER MATTERS SHOWN ARE NOT
TO BE RELIED UPON, OR TO BE CONSIDERED AS
EITHER BEING APPROVED OR IN ACCORDANCE
WITH APPLICABLE CODES.
DOB STAMP & SIGNATURES
DOB SCAN
Steven Winter Associates, Inc.
307 Seventh Avenue, Suite 1701
New York, NY 10001
Office: (212) 564-5800
Fax: (212) 246-3533 web: www.swinter.com
FILE:
PROJECT NO:
CHECKED BY:
DRAWN BY:
G-000
COVER PAGE
SHEET ---- OF #
F E
M
E M
P O
R A
Y
H
O U
S I N
G
U
N I T
S
PROJECT CODE/NUMBER
wer wer dg
G-000
April 14, 2023 m i n
P R
O J E
M
E
DATEMARK DESCRIPTION
THIS DRAWING SHALL NOT BE USED FOR
CONSTRUCTION UNLESS A PROFESSIONAL SEAL
AND SIGNATURE ARE ON THE DRAWING
STAMP:
THIS PLAN IS APPROVED ONLY FOR WORK AS
INDICATED ON THE APPLICATION SPECIFICATION
SHEET. ALL OTHER MATTERS SHOWN ARE NOT
TO BE RELIED UPON, OR TO BE CONSIDERED AS
EITHER BEING APPROVED OR IN ACCORDANCE
WITH APPLICABLE CODES.
DOB STAMP & SIGNATURES
DOB SCAN
Steven Winter Associates, Inc.
307 Seventh Avenue, Suite 1701
New York, NY 10001
Office: (212) 564-5800
Fax: (212) 246-3533 web: www.swinter.com
FILE:
PROJECT NO:
CHECKED BY:
DRAWN BY:
G-001
GENERAL NOTES
SHEET ---- OF #
F E
M
P O
R A
U
S I N
G
U
N I T
S
PROJECT CODE/NUMBER
wer wer dg
Accessibility Codes Used - Most Stringent Criteria Applies
· Architectural Barriers Act (ABA) Accessibility Standards
· Uniform Federal Accessibility Standards (UFAS)
Electric
· Mounting Height.
o Outlets and switches must be mounted no less than 15 inches AFF, measured to the bottom of the electrical box, and no more than
48 inches AFF, measured to the top of the electrical box. Outlets and switches located over obstructions (e.g. kitchen countertops) must comply with the following:
§ Where a side approach is provided at obstructions greater than 10 inches in depth, outlets and switches must be mounted no more than 46 inches AFF, measured to the top of the box. Reaching over obstructions greater than 34 inches in height and 24 inches in depth is not permitted; and
§ Where a front approach, including knee and toe clearance, is provided at obstructions greater than 20 inches in depth, outlets and switches are mounted no more than 44 inches AFF, measured to the top of the box. Reaching over obstructions greater than 25 inches in depth is not permitted.
· Location:
o Bedrooms: A means to control at least once source of bedroom lighting from the bed must be provided.
· Thermostats o Thermostats must be mounted fully below 48 inches AFF.
Windows
· All operable windows must comply with UFAS Section 4.34.2(9).
· The lock must be mounted no more than 54 inches AFF;
· If the reach depth to the lock exceeds 10 inches, the lock must be mounted no more than 46 inches AFF.
· The lock requires no pinching, twisting, or grasping to operate; and
· The lock requires no more than 5 pounds of force to operate.
· Be mindful that window blinds (wands and pull strings) are also subject to the criteria provided above.
Thresholds and Level Changes
· Thresholds and level changes along the accessible route cannot exceed ½ inch in height with a bevel not exceeding 1:2 and unbeveled level changes cannot exceed ¼ inch.
· The threshold at roll-in showers cannot exceed inch with a bevel not exceeding 1:2 and unbeveled level changes cannot exceed inch. The treshold at trasfer showers cannot exceed inch. See ABAAS Section 608.7.
Doors
· Pocket Doors. Pocket doors shown comply with the following when in the fully open position:
· A minimum clear opening width of 32 inches is provided.
· Hardware is exposed and usable from both sides of the door.
· Main Entry Door. The bottom 10 inches of the push side of the door must be smooth and free of obstructions for the full width of the door.
Bathrooms
· Hand Shower Hose. The hand shower must have a hose no less than 60 inches in length. The hand shower must be equipped with a non positive shut off.
· Bathtub Seat. Top of bathtub seats must be mounted 17-19 inches AFF. The depth of the removable seat must be 15-16 inches.
· Shower Seats. Shower seats must comply with UFAS Figure 36.
· Water Closet flush controls must be installed on the open side of the fixture.
Kitchens
· Cabinet shelving must be full depth.
· At least 50% of shelf space for all storage in kitchens must be mounted above 15 inches AFF and below 48 inches AFF.
Furniture
· Where bedrooms that are less than 70 square feet, furniture supplied with the unit cannot overlap the accessible route, maneuvering clearances at doors, and turning space.
G-001
60x75 RV
QUEEN
x x
48x22 EGRESS
24x15
48x22
48x22 EGRESS
4 DRAWER CHEST
48x22 EGRESS
24x22
30x75
60x75 x x x x
48X22 EGRESS
48X22 EGRESS
24x15
48X22 EGRESS
48X22 EGRESS
4 DRAWER CHEST
D
R A
W E
R
C
H E
S T
24x22
P R
O J E
M
E
DATEMARK DESCRIPTION
THIS DRAWING SHALL NOT BE USED FOR
CONSTRUCTION UNLESS A PROFESSIONAL SEAL
AND SIGNATURE ARE ON THE DRAWING
STAMP:
THIS PLAN IS APPROVED ONLY FOR WORK AS
INDICATED ON THE APPLICATION SPECIFICATION
SHEET. ALL OTHER MATTERS SHOWN ARE NOT
TO BE RELIED UPON, OR TO BE CONSIDERED AS
EITHER BEING APPROVED OR IN ACCORDANCE
WITH APPLICABLE CODES.
DOB STAMP & SIGNATURES
DOB SCAN
Steven Winter Associates, Inc.
307 Seventh Avenue, Suite 1701
New York, NY 10001
Office: (212) 564-5800
Fax: (212) 246-3533 web: www.swinter.com
FILE:
PROJECT NO:
CHECKED BY:
DRAWN BY:
A-100
PLANS
SHEET ---- OF #
F E
M
P O
R A
U
S I N
G
U
N I T
S
PROJECT CODE/NUMBER
wer wer dg
8'
DEPTH OF SINKS CANNOT EXCEED 6.5". SEE UFAS
SECTION 4.34.6.5 (3)
NO CARPET CAN BE USED IN THESE UNITS. SEE
ABAAS SECTION 809.2.1.2
30x36"
NO LEG TABLE
TO PROVIDE KNEE
AND TOE
CLEARANCE
DEPTH OF SINK
CANNOT EXCEED 6.5".
SEE UFAS
SECTION
4.34.6.5 (3)
22"RANGE TOP
W/ BUILT-IN
MICROWAVE
BELOW
10.7 CU
REFRIGERATOR
18"
30" CLEAR
SPACE BELOW
30" CLEAR
SPACE
BELOW
36" min.
11'-11"
8'-4"
CLEAR FINISH TO FINISH
34'
11'-6"
CLEAR FINISH TO FINISH
1'-6"
1'-2"
18"
8' 7'-6"
2'-8"
3'
2'-9
5'
2'-8"
2'
5'-5"
6'-6"
4"
10' 8'-4"9'-4"
42x32"
EXPANDABLE TABLE
TO PROVIDE KNEE
AND TOE
CLEARANCE
13'-11"
STORAGE UNDER BUNK
BEDS SHIPPED LOOSE
(TYP.)
STORAGE UNDER RV
QUEEN BED SHIPPED LOOSE
(TYP.)
STORAGE UNDER SOFA
(TYP.)
36'
STORAGE UNDER SOFA
(TYP.)
SEE BATH PLANS
SEE BATH PLANS
A-100
A-105, A-106
A-108, A-110
30x75
60x75 x x x x
48X22 EGRESS
48X22 EGRESS
24x15
48X22 EGRESS
48X22 EGRESS
24x15
24x15
4 DRAWER CHEST
24x22
30x75
60x75
48X22 EGRESS
24x15 x x
36x22 EGRESS 36x22 EGRESS
48X22 EGRESS
4 DRAWER CHEST
4 DRAWER CHEST
48X22 EGRESS
24x22
P R
O J E
M
E
DATEMARK DESCRIPTION
THIS DRAWING SHALL NOT BE USED FOR
CONSTRUCTION UNLESS A PROFESSIONAL SEAL
AND SIGNATURE ARE ON THE DRAWING
STAMP:
THIS PLAN IS APPROVED ONLY FOR WORK AS
INDICATED ON THE APPLICATION SPECIFICATION
SHEET. ALL OTHER MATTERS SHOWN ARE NOT
TO BE RELIED UPON, OR TO BE CONSIDERED AS
EITHER BEING APPROVED OR IN ACCORDANCE
WITH APPLICABLE CODES.
DOB STAMP & SIGNATURES
DOB SCAN
Steven Winter Associates, Inc.
307 Seventh Avenue, Suite 1701
New York, NY 10001
Office: (212) 564-5800
Fax: (212) 246-3533 web: www.swinter.com
FILE:
PROJECT NO:
CHECKED BY:
DRAWN BY:
A-101
PLANS
SHEET ---- OF #
F E
M
P O
R A
U
S I N
G
U
N I T
S
PROJECT CODE/NUMBER
wer wer dg
DEPTH OF SINKS CANNOT EXCEED 6.5". SEE UFAS
SECTION 4.34.6.5 (3)
NO CARPET CAN BE USED IN THESE UNITS. SEE
ABAAS SECTION 809.2.1.2
8'
36'
2'-6" 6'-6"
4"
10' 8'-4"9'-4"
42x32"
EXPANDABLE TABLE
TO PROVIDE KNEE
AND TOE
CLEARANCE
13'-11"
36'
8'-4"
4"
8'-2"
11'-2"
7'-6" 10'
5'5'
8'
2'-5"
2'-9"
2'-9"
STORAGE UNDER BUNK
BEDS SHIPPED LOOSE
(TYP.)
15" cl
15" cl
STORAGE UNDER RV
QUEEN BED SHIPPED LOOSE
(TYP.)
STORAGE UNDER SOFA
(TYP.)
STORAGE UNDER SOFA
(TYP.)
STORAGE UNDER RV
QUEEN BED
(TYP.)
STORAGE UNDER BUNK
BEDS SHIPPED LOOSE
(TYP.)
SEE BATH PLANS
SEE BATH PLANS
A-101
A-105, A-106
A-108, A-110
60x75 x x x x
48X22 EGRESS
48X22 EGRESS
24x15
48X22 EGRESS
24X15 EGRESS
24x15
24x15
4 DRAWER CHEST
48x75
LOWER BUNK
24x22 m i n
6" min
P R
O J E
M
E
DATEMARK DESCRIPTION
THIS DRAWING SHALL NOT BE USED FOR
CONSTRUCTION UNLESS A PROFESSIONAL SEAL
AND SIGNATURE ARE ON THE DRAWING
STAMP:
THIS PLAN IS APPROVED ONLY FOR WORK AS
INDICATED ON THE APPLICATION SPECIFICATION
SHEET. ALL OTHER MATTERS SHOWN ARE NOT
TO BE RELIED UPON, OR TO BE CONSIDERED AS
EITHER BEING APPROVED OR IN ACCORDANCE
WITH APPLICABLE CODES.
DOB STAMP & SIGNATURES
DOB SCAN
Steven Winter Associates, Inc.
307 Seventh Avenue, Suite 1701
New York, NY 10001
Office: (212) 564-5800
Fax: (212) 246-3533 web: www.swinter.com
FILE:
PROJECT NO:
CHECKED BY:
DRAWN BY:
A-102
PLANS
SHEET ---- OF #
F E
M
P O
R A
U
S I N
G
U
N I T
S
PROJECT CODE/NUMBER
wer wer dg
DEPTH OF SINKS CANNOT EXCEED 6.5". SEE UFAS
SECTION 4.34.6.5 (3)
NO CARPET CAN BE USED IN THESE UNITS. SEE
ABAAS SECTION 809.2.1.2
8'
36'
2'-6" 6'-6"
4"
10' 8'-4"9'-4"
42x32"
EXPANDABLE TABLE
TO PROVIDE KNEE
AND TOE
CLEARANCE
13'-11"
15" cl
STORAGE UNDER RV
QUEEN BED SHIPPED LOOSE
(TYP.)
STORAGE UNDER SOFA
(TYP.)
SEE BATH PLANS
FULL SIZE LOWER BUNK
AND SINGLE TOP BUNK
(TYP.)
A102
4'
DASHED LINE INDICATES REQUIRED 6"
DEEP BY 9" HEIGHT REQUIRED TOE SPACE
TO ACCOMMODATE TURNING TEE. SEE
DETAIL 1/A102
LINE OF 30X75 TOP
OF BUNK
1'-6"
DOOR LOCATION
MAY BE ADJUSTED IF
REQUIRED FOR
STRUCTURE.
STORAGE UNDER
BUNK BED SHIPPED
LOOSE
24x22
L
C
L
MATERIALPRODUCT TRADENAMEMODELNUMBER
MODELNUMBERTRADENAME PRODUCTMATERIAL
MODELNUMBERTRADENAMEPRODUCTMATERIAL
MODELNUMBERTRADENAMEPRODUCTMATERIAL
MATERIALPRODUCTTRADENAMEMODELNUMBERVITREOUS CHINALAVATORYPINOIRK-2035-8
MATERIAL PRODUCTTRADENAMEMODELNUMBER
MATERIALPRODUCTTRADENAMEMODELNUMBER
P R
O J E
M
E
DATEMARK DESCRIPTION
THIS DRAWING SHALL NOT BE USED FOR
CONSTRUCTION UNLESS A PROFESSIONAL SEAL
AND SIGNATURE ARE ON THE DRAWING
STAMP:
THIS PLAN IS APPROVED ONLY FOR WORK AS
INDICATED ON THE APPLICATION SPECIFICATION
SHEET. ALL OTHER MATTERS SHOWN ARE NOT
TO BE RELIED UPON, OR TO BE CONSIDERED AS
EITHER BEING APPROVED OR IN ACCORDANCE
WITH APPLICABLE CODES.
DOB STAMP & SIGNATURES
DOB SCAN
Steven Winter Associates, Inc.
307 Seventh Avenue, Suite 1701
New York, NY 10001
Office: (212) 564-5800
Fax: (212) 246-3533 web: www.swinter.com
FILE:
PROJECT NO:
CHECKED BY:
DRAWN BY:
A-102
BATHROOM DETAILS
SHEET ---- OF #
F E
M
P O
R A
U
S I N
G
U
N I T
S
PROJECT CODE/NUMBER
wer wer dg
WALL MOUNTED FOLDING
SEAT.
18"
36"
8'-4"
CLEAR FINISH TO FINISH
7'-6"
CLEAR FINISH TO FINISH
12" 42"
32"
36"
36"
36"
MIN
WALL MOUNTED
SINK, CLEAR SPACE
BELOW
36"
N
T E
R L I N
E
O
F
B
A R flush controls open side m a x m a x m e a s u r e d t o t o p o f s h e l f m e a s u r e d t o t o p o f r e f l e c t i v e s u r f a c e t o c e n t e r l i n e o f b a r provide pipe protection
54" min.
42" min
7-9" max.
t o c e n t e r l i n e o f b a r
CL
1'-3"
CONTROL AREA MUST BE
LOCATED 38-48" AFF AND ON
THE OPEN SIDE OF THE
SHOWER.
A F
F m i n t o c e n t e r l i n e o f b a r
A102
A102
A102
A102
6" max.
11" min.
m a x m i n
SINK CLEARANCES
APPLY TO ALL SINKS
m i n
12" 6"
A-103
MODELNUMBERTRADENAMEPRODUCTMATERIAL
MATERIALPRODUCTTRADENAMEMODELNUMBER
MATERIALPRODUCTTRADENAMEMODELNUMBER
MODELNUMBERTRADENAMEPRODUCTMATERIAL
P R
O J E
M
E
DATEMARK DESCRIPTION
THIS DRAWING SHALL NOT BE USED FOR
CONSTRUCTION UNLESS A PROFESSIONAL SEAL
AND SIGNATURE ARE ON THE DRAWING
STAMP:
THIS PLAN IS APPROVED ONLY FOR WORK AS
INDICATED ON THE APPLICATION SPECIFICATION
SHEET. ALL OTHER MATTERS SHOWN ARE NOT
TO BE RELIED UPON, OR TO BE CONSIDERED AS
EITHER BEING APPROVED OR IN ACCORDANCE
WITH APPLICABLE CODES.
DOB STAMP & SIGNATURES
DOB SCAN
Steven Winter Associates, Inc.
307 Seventh Avenue, Suite 1701
New York, NY 10001
Office: (212) 564-5800
Fax: (212) 246-3533 web: www.swinter.com
FILE:
PROJECT NO:
CHECKED BY:
DRAWN BY:
A-103
BATHROOM DETAILS
SHEET ---- OF #
F E
M
P O
R A
U
S I N
G
U
N I T
S
PROJECT CODE/NUMBER
wer wer dg
5'
2'-6"
8'-4"
CLEAR FINISH TO FINISH
18"
30" CLEAR
SPACE BELOW
42"12"
36"
5' 3'-1"
36" flush controls open side
5'2'-6"
WALL
MOUNTED
FOLDING
SEAT
54" min.
42" min
7-9" max.
t o c e n t e r l i n e o f b a r
A F
F m i n
44" m a x m a x m e a s u r e d t o t o p o f s h e l f m e a s u r e d t o t o p o f r e f l e c t i v e s u r f a c e provide pipe protection
20"
26"
A104
A103
A103
N
T E
R L I N
E
O
F
B
A R
12" 6"
A-104
MODELNUMBERTRADENAMEPRODUCTMATERIAL
MODELNUMBERTRADENAMEPRODUCTMATERIAL
MATERIALPRODUCTTRADENAMEMODELNUMBER
MODELNUMBERTRADENAMEPRODUCTMATERIAL
MODELNUMBERTRADENAMEPRODUCT MATERIAL
MATERIALPRODUCTTRADENAMEMODELNUMBER
MODELNUMBERTRADENAMEPRODUCTMATERIAL
P R
O J E
M
E
DATEMARK DESCRIPTION
THIS DRAWING SHALL NOT BE USED FOR
CONSTRUCTION UNLESS A PROFESSIONAL SEAL
AND SIGNATURE ARE ON THE DRAWING
STAMP:
THIS PLAN IS APPROVED ONLY FOR WORK AS
INDICATED ON THE APPLICATION SPECIFICATION
SHEET. ALL OTHER MATTERS SHOWN ARE NOT
TO BE RELIED UPON, OR TO BE CONSIDERED AS
EITHER BEING APPROVED OR IN ACCORDANCE
WITH APPLICABLE CODES.
DOB STAMP & SIGNATURES
DOB SCAN
Steven Winter Associates, Inc.
307 Seventh Avenue, Suite 1701
New York, NY 10001
Office: (212) 564-5800
Fax: (212) 246-3533 web: www.swinter.com
FILE:
PROJECT NO:
CHECKED BY:
DRAWN BY:
A-104
BATHROOM DETAILS
SHEET ---- OF #
F E
M
P O
R A
U
S I N
G
U
N I T
S
PROJECT CODE/NUMBER
wer wer dg
5'
2'-6"
18"
8'-4"
CLEAR FINISH TO FINISH
42"12"
36"
30" CLEAR
SPACE BELOW
60"
36" t o c e n t e r l i n e o f b a r
54" min.
42" min
7-9" max.
t o c e n t e r l i n e o f b a r
A F
F m i n t o c e n t e r l i n e o f b a r t o c e n t e r l i n e o f b a r m a x m a x m e a s u r e d t o t o p o f s h e l f m e a s u r e d t o t o p o f r e f l e c t i v e s u r f a c e provide pipe protection
N
T E
R L I N
E
O
F
B
A R
12" 6" tub seat
4 5
A-105 x x
48x22 EGRESS
24x15
48x22
30x75
24x15 x x
36x22 EGRESS 36x22 EGRESS
48X22 EGRESS
4 DRAWER CHEST
P R
O J E
M
E
DATEMARK DESCRIPTION
THIS DRAWING SHALL NOT BE USED FOR
CONSTRUCTION UNLESS A PROFESSIONAL SEAL
AND SIGNATURE ARE ON THE DRAWING
STAMP:
THIS PLAN IS APPROVED ONLY FOR WORK AS
INDICATED ON THE APPLICATION SPECIFICATION
SHEET. ALL OTHER MATTERS SHOWN ARE NOT
TO BE RELIED UPON, OR TO BE CONSIDERED AS
EITHER BEING APPROVED OR IN ACCORDANCE
WITH APPLICABLE CODES.
DOB STAMP & SIGNATURES
DOB SCAN
Steven Winter Associates, Inc.
307 Seventh Avenue, Suite 1701
New York, NY 10001
Office: (212) 564-5800
Fax: (212) 246-3533 web: www.swinter.com
FILE:
PROJECT NO:
CHECKED BY:
DRAWN BY:
A-105
KITCHEN DETAILS
SHEET ---- OF #
F E
M
P O
R A
U
S I N
G
U
N I T
S
PROJECT CODE/NUMBER
wer wer dg
DEPTH OF SINKS CANNOT EXCEED 6.5". SEE UFAS
SECTION 4.34.6.5 (3)
CANNOT REACH OVER BURNERS TO OPERATE
CONTROLS OF RANGE.
50% OF FREEZER SPACE MUST BE 54" ABOVE
FINISHED FLOOR. 100% OF THE REFRIGERATOR
SPACE AND CONTROL MUST BE MOUNTED BELOW
54" AFF.
30x36"
NO LEG TABLE
TO PROVIDE KNEE
AND TOE
CLEARANCE
DEPTH OF SINK
CANNOT
EXCEED 6.5".
SEE UFAS
SECTION
4.34.6.5 (3)
22"RANGE TOP
W/ BUILT-IN
MICROWAVE
BELOW
10.7 CU
REFRIGERATOR
30" CLEAR
SPACE BELOW
2'
5'-8"
TOP OF BOTTOM SHELF MUST BE MOUNTED
NO MORE THAN 48" AFF.
WINDOW CONTROLS NO MORE
THAN 46" AFF
A F
F
30" min. knee and toe clearance below sink
22"RANGE TOP
W/ BUILT-IN
MICROWAVE
BELOW
10.7 CU
REFRIGERATOR
30" clear space below
A105
11'-11"
3'
12'-11"
CABINETRY IS PERMITTED UNDER THE KITCHEN SINK
AND WORK SURFACE AS LONG AS THE CABINETRY
CAN BE REMOVED WITHOUT REMOVAL OR
REPLACEMENT OF THE SINK OR WORK SURFACE;
THE FINISHED FLOOR EXTENDS BELOW; AND THE
WALLS BEHIND THE MILLWORK ARE FINISHED. SEE
ABAAS SECTIONS 804.3 AND 804.4 AND UFAS
SECTIONS 4.34.6.4 (2) AND 4.34.6.5(5).
DEPTH OF SINK
CANNOT
EXCEED 6.5".
SEE UFAS
SECTION
4.34.6.5 (3)
10.7 CU
REFRIGERATOR
30x36"
NO LEG TABLE
TO PROVIDE KNEE
AND TOE
CLEARANCE
22"RANGE TOP
W/ BUILT-IN
MICROWAVE
BELOW
30" CLEAR
SPACE BELOW
15" cl
8'-2"
22"RANGE TOP
W/ BUILT-IN
MICROWAVE
BELOW
10.7 CU
REFRIGERATOR
TOP OF BOTTOM SHELF MUST BE MOUNTED
NO MORE THAN 48" AFF.
WINDOW CONTROLS NO MORE
THAN 46" AFF
A F
F
A105
CABINETRY IS PERMITTED UNDER THE KITCHEN SINK
AND WORK SURFACE AS LONG AS THE CABINETRY
CAN BE REMOVED WITHOUT REMOVAL OR
REPLACEMENT OF THE SINK OR WORK SURFACE;
THE FINISHED FLOOR EXTENDS BELOW; AND THE
WALLS BEHIND THE MILLWORK ARE FINISHED. SEE
ABAAS SECTIONS 804.3 AND 804.4 AND UFAS
SECTIONS 4.34.6.4 (2) AND 4.34.6.5(5).
A-106 http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com x x
48X22 EGRESS
24x15
48X22 EGRESS
P R
O J E
M
E
DATEMARK DESCRIPTION
THIS DRAWING SHALL NOT BE USED FOR
CONSTRUCTION UNLESS A PROFESSIONAL SEAL
AND SIGNATURE ARE ON THE DRAWING
STAMP:
THIS PLAN IS APPROVED ONLY FOR WORK AS
INDICATED ON THE APPLICATION SPECIFICATION
SHEET. ALL OTHER MATTERS SHOWN ARE NOT
TO BE RELIED UPON, OR TO BE CONSIDERED AS
EITHER BEING APPROVED OR IN ACCORDANCE
WITH APPLICABLE CODES.
DOB STAMP & SIGNATURES
DOB SCAN
Steven Winter Associates, Inc.
307 Seventh Avenue, Suite 1701
New York, NY 10001
Office: (212) 564-5800
Fax: (212) 246-3533 web: www.swinter.com
FILE:
PROJECT NO:
CHECKED BY:
DRAWN BY:
A-106
KITCHEN DETAILS
SHEET ---- OF #
F E
M
P O
R A
U
S I N
G
U
N I T
S
PROJECT CODE/NUMBER
wer wer dg
DEPTH OF SINKS CANNOT EXCEED 6.5". SEE UFAS
SECTION 4.34.6.5 (3)
CANNOT REACH OVER BURNERS TO OPERATE
CONTROLS OF RANGE.
50% OF FREEZER SPACE MUST BE 54" ABOVE
FINISHED FLOOR. 100% OF THE REFRIGERATOR
SPACE AND CONTROL MUST BE MOUNTED BELOW
54" AFF.
DEPTH OF SINK
CANNOT
EXCEED 6.5".
SEE UFAS
SECTION
4.34.6.5 (3)
22"RANGE TOP
W/ BUILT-IN
MICROWAVE
BELOW
10.7 CU
REFRIGERATOR
2'-6"2'-6"
2'
TOP OF BOTTOM SHELF MUST BE MOUNTED
NO MORE THAN 48" AFF.
WINDOW CONTROLS NO MORE
THAN 46" AFF
30" min. knee and toe clearance below sink
22"RANGE TOP
W/ BUILT-IN
MICROWAVE
BELOW
10.7 CU
REFRIGERATOR
9'
A106
CABINETRY IS PERMITTED UNDER THE KITCHEN SINK
AND WORK SURFACE AS LONG AS THE CABINETRY
CAN BE REMOVED WITHOUT REMOVAL OR
REPLACEMENT OF THE SINK OR WORK SURFACE;
THE FINISHED FLOOR EXTENDS BELOW; AND THE
WALLS BEHIND THE MILLWORK ARE FINISHED. SEE
ABAAS SECTIONS 804.3 AND 804.4 AND UFAS
SECTIONS 4.34.6.4 (2) AND 4.34.6.5(5).
A-107 http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com http://www.Architecture4design.com
| G-000 |
| R5-G-000 |
| 20220930-100CDsRev04 CJS-G-001 |
| G-001 |
| 20220930-100CDsRev05-R5-A100 |
| R5-A100 |
| 20220930-100CDsRev05-R5 - A101 |
| R5 - A101 |
| 20220930-100CDsRev05-B-102 |
| B-102 |
| 20220930-100CDsRev05-B103 |
| B103 |
| 20220930-100CDsRev05-B-104 |
| B-104 |
| 20220930-100CDsRev05-R5-K105 |
| R5-K105 |
| 20220930-100CDsRev05-R5-K106 |
| R5-K106 |
File details come from the government source that posted it. Updated .