SOW 26-6G8 Link16 VME TC CPU Monitor Adapter Plate Contract 29Sept2026.pdf

SOW PWS Template 2021 June.doc

STATEMENT OF WORK (SOW) DMEA 26-6G8

9/29/2026

Project Engineer:

Contract Officer Representative:

1.0 SCOPE: The scope of this project encompasses the manufacturing of Monitor Adapter Plates for development, prototype, and production purposes. The manufactured monitor adapter plates will be designed to accommodate a 12-inch monitor for the Link 16 Multifunctional Information Distribution System (MIDS) for external DoD customers.

1.1 TITLE: Link 16 Multifunctional Information Distribution System (MIDS) Monitor Adapter Plate Manufacturing

1.2 APPLICABILITY: This effort is directed at the manufacturing of prototype and production grade monitor adapter plates. The hardware will serve external DoD customers and is critical in ensuring display compatibility with Link 16 Multifunctional Information Distribution System (MIDS) requirements.

1.3 BACKGROUND: DMEA is currently designing developmental, prototype, and production Monitor Adapter Plates/Hardware for external DoD Customers. This hardware will support the upgrade of an existing 10" monitor to a 12 " monitor with higher definition display on the Link 16 Multifunctional Information Distribution System

(MIDS).

1.4 PURPOSE: The purpose of this task is to perform monitor adapter plate hardware manufacturing.

2.0 REFERENCED GOVERNMENT PROVIDED RESOURCES: None

2.1 GOVERNMENT DOCUMENTS:

Document No. Date Title TBD at Contract Award Latest Link 16 MOS Cabinet Hardware Specifications, Design and

Manufacturing Files

2.2 OTHER DOCUMENTS: None

Document No. Date Title

2.3 GOVERNMENT FURNISHED EQUIPMENT: None

3.0 REQUIREMENTS:

3.1 GENERAL REQUIREMENTS:

3.2 PROGRAM MANAGEMENT: None.

3.3 TASK REQUIREMENTS: The contractor will manufacture (Qty = 60) of the specified hardware (section 3.3.1) in adherence to the specifications, design files, and manufacturing guidelines provided by DMEA. The contractor is required to review and verify the design files before commencing manufacturing. The contractor will provide prototype units (Qty: 1) for review and validation during the initial stages of manufacturing.

SOW PWS Template 2021 June.doc

3.3.1 Technical and Hardware Requirements: The primary objective of this task is manufacturing monitor adapter plates which supports the upgrade of the existing 10-inch monitor on the Link 16 Multifunctional Information Distribution System (MIDS) to a new 12-inch monitor with higher-definition display. The hardware requirements include procuring (Qty = 60) 12-inch high-definition monitor Adapter Plates. The selected model must have its internal electronics condensed in the center of the unit to ensure clearance within the original 10-inch frame's physical footprint. The adapter plate requirements include fabricating a custom mechanical adapter plate designed to bridge the new monitor and the old mounting setup. The adapter plate must successfully map the mounting points of the new 12-inch monitor to the existing 10-inch hole spacing on the MOS cabinet. Clearance verification must ensure the condensed central electronics of the 12-inch monitor fit safely inside the original 10-inch frame cavity without cable pinching or airflow restriction.

3.3.1 REQUIREMENT: The contractor will manufacture the following part descriptions in accordance with DMEA provided specifications, design and manufacturing files, including material selection, dimensions, and tolerances.

Part Description Material Qty Monitor Adapter 6061-T6 Aluminum.

Finish: MIL Type II Blk.

Connector Mounting Bracket 5052 H32 Aluminum Finish: MIL Type II Blk

3.5 Reporting: The contractor will provide regular technical updates throughout the period of performance. These updates should include progress and delivery dates.

4.0 DATA ITEMS: NONE

5.0 POINTS OF CONTACT: