Connector Mt. Bracket_02.pdf
PDF 104 KB Posted
- Attached to
- Link 16 Multifunctional Information Distribution System (MIDS) Monitor Adapter Plate Manufacturing
- Solicitation number
- HQ072726QCB07
- Issued by
-
Defense Microelectronics Activity
About this file
This is a technical drawing for a Connector Mounting Bracket produced by the Defense Microelectronics Activity (DMEA). The bracket is manufactured from 6061 aluminum with an anodized-clear finish and is identified as drawing number TBD with revision 1, released on October 7, 2026. The flat pattern drawing is scaled 1:2 and provides detailed dimensional specifications in millimeters, including multiple hole locations (4x Ø.18 and 4x Ø.13), rounded corners with radii of 0.12 inches, and various dimensional tolerances per ASME Y14.5 standards (angular tolerance of ±0.5°, two-place decimal tolerance of ±0.10 mm, and three-place decimal tolerance of ±0.050 mm).
The document is marked as proprietary and confidential property of the United States Department of War and is restricted to Department of War and U.S. Department of War contractors only due to critical technology classification (September 2024). The drawing is subject to the Arms Export Control Act and Export Administration Act restrictions, with violations subject to severe criminal penalties. Distribution is authorized only under DOW Directive 5230.25, and the document must be destroyed by any method that prevents disclosure or reconstruction of its contents. All other requests for this document must be referred to the Defense Microelectronics Activity.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1.08
1.54 .10
4x .13
1.30 .67
.93
.73
.31
.43
.31
.88
2.68
.16 .16
.93
4x .18 .19
1.34
.65
4.56
1.30
UP
0° R
.1
UP
0° R
.1
D O
W N
0°
R .1
D O
W N
0°
R .1
FLAT PATTERN
SCALE 1:2
REVISIONS
ZONE REV. DESCRIPTION DATE
1 INITIAL RELEASE 10/7/2026
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1
REVDWG. NO.
ASIZE
TITLE:
DEFENSE MICRO ELECTRONICS ACTIVITYNAME DATE
ENG APPR.
DRAWN
ANNODIZED -CLEARFINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5
DIMENSIONS ARE IN MM
GENERAL TOLERANCES:
ANGULAR: MACH 0.5°
TWO PLACE DECIMAL 0.10
THREE PLACE DECIMAL 0.050
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
UNITED STATES DEPARTMENT OF WAR.
ANY REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN PERMISSION
OF DEFENSE MICROELECTRONICS ACTIVITY
IS PROHIBITED. DO NOT SCALE DRAWING
A A
B B
C C
D D
E E
F F
10/7/2026D. CABLE
6061 ALUMINUM CONNECTOR MT. BRACKET
TBD 1
DISTRIBUTION STATEMENT D
DESTRUCTION NOTICE
WARNING
DISTRIBUTION AUTHORIZED TO DEPARTMENT OF WAR AND U.S. DOW CONTRACTORS ONLY (CRITICAL TECHNOLOGY) [SEPTEMBER 2024]. OTHER REQUEST FOR THIS DOCUMENT MUST BE REFERRED TO:
DEFENSE MICROELECTRONICS ACTIVITY (DMEA).
DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF
THIS DOCUMENT.
THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC. 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979 AS
AMENDED, TITLE 50 U.S.C.APP.2401 ET SEQ.
VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IAW
THE PROVISIONS OF THE DOW DIRECTIVE 5230.25.
| Sheet1 |
| Drawing View12 |
| Drawing View13 |
| Drawing View15 |
| Drawing View16 |
File details come from the government source that posted it. Updated .