SoN Laser Wire Marker.pdf
PDF 106 KB Posted
- Attached to
- 22MXG - Laser Wire Marking Equipment
- Solicitation number
- FA462125Q0047
About this file
This Statement of Need outlines the 22d Maintenance Group (MXG) at McConnell Air Force Base's requirements for a Laser Wire Marking Equipment. The equipment must meet specific technical standards, including SAE AIR5468, AS5942, AS5649, and BAC 5152, with a UV laser marking type capable of marking 40 feet per minute and supporting 200 characters per identification mark on shielded and unshielded, single and multi-conductor cables.
The required equipment must include additional features such as a knot/kink/cut sensor with auto stop, tension meter, powered coil pan, and coiling pan sensor. The contractor is expected to provide a minimum six-month warranty covering materials and workmanship defects, and complete delivery within 6 months after receiving the purchase order and clarifying technical and commercial details. The procurement references Technical Order 1-1A-14 chapter 8, which specifically requires the use of CAPRIS 50-100PCS (3611-99-968-3679) or an equivalent system.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QA - Laser Wire Marker.pdf | ||
| BNJ - Laser Wire Marker - signed (redacted).pdf | ||
| Solicitation - FA462125Q0047 - SIGNED.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
20 Jul 2025
Statement of Need
Laser Wire Marking Equipment
McConnell AFB, Kansas
1. Overview
1.1 The 22d MXG requires a laser wire marker that meets the standards and specifications listed below.
Technical Order 1-1A-14 chapter 8 requires the use of “CAPRIS 50- 100PCS (3611- 99- 968- 3679) or equivalent”.
2. Requirements
2.1. IAW 1-1A-14 chapter 8, the laser wire marker must meet SAE AIR5468, specifications AS5942 and AS5649. Additionally, the laser wire marker must meet BAC 5152 standards.
Marking Type UV Laser
Marking Speed 40ft/min
Print Selection 200 characters per identification mark as standard Full upper- and lower-case ASCII alphanumeric character set available
Wire capability’s Shielded and Unshielded, single and multi-conductor cables
2.2 Required Add on Features:
a. knot/kink/cut sensor with auto stop.
b. tension meter
c. powered coil pan
d. coiling pan sensor
3. Warranty
3.1 The contractor shall provide a minimum of six months from the date of delivery and covers defects in materials and workmanship, and malfunctions or failures due to manufacturing errors.
4. Delivery
4.1 The contractor shall complete delivery within 6 months after receipt of purchase order and clarification of all technical and commercial details.
File details come from the government source that posted it. Updated .