Solicitation - N0017325RDH03 Final.pdf

SOLICITATION, OFFER AND AWARD 1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 7900)

RATING PAGE OF PAGES

2. CONTRACT NUMBER 3. SOLICITATION NUMBER 4. TYPE OF SOLICITATION 5. DATE ISSUED 6. REQUISITION/PURCHASE NUMBER

CODE7. ISSUED BY 8. ADDRESS OFFER TO (If other than item 7)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

9. Sealed offers in original and copies for furnishings the supplies or services in the Schedule will be received at the place specified in item 8, or if hand carried, in the depository located in until local time

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR

INFORMATION

CALL:

A. NAME B. TELEPHONE (NO COLLECT CALLS)

AREA CODE NUMBER EXTENSION

C. E-MAIL ADDRESS

11. TABLE OF CONTENTS

(X) SEC. DESCRIPTION PAGE(S) (X) SEC. PAGE(S)DESCRIPTION

A B C D E F G H

I

J

K

L

M EVALUATION FACTORS FOR AWARD

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORS

PART IV - REPRESENTATIONS AND INSTRUCTIONS

LIST OF ATTACHMENTS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

CONTRACT CLAUSESSOLICITATION/CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/COSTS

DESCRIPTION/SPECS./WORK STATEMENT

PACKAGING AND MARKING

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

CONTRACT ADMINISTRATION DATA

SPECIAL CONTRACT REQUIREMENTS

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

OFFER (Must be fully completed by offeror)

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) 30 CALENDAR DAYS (%) CALENDAR DAYS(%)

DATEAMENDMENT NO.AMENDMENT NO. DATE

15A. NAME AND

ADDRESS

OF OFFER-

OR

CODE FACILITY 16. NAME AND THE TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

15B. TELEPHONE NUMBER

AREA CODE NUMBER EXTENSION

15C. CHECK IF REMITTANCE ADDRESS IS

DIFFERENT FROM ABOVE - ENTER SUCH

ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL OPEN COMPETITION:

10 U.S.C. 2304 (c) ( )41 U.S.C. 3304(a)

24. ADMINISTERED BY (If other than Item 7)

26. NAME OF CONTRACTING OFFICER (Type or print)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition is unusable

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

25. PAYMENT WILL BE MADE BY

27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

CODE

ITEM

STANDARD FORM 33 (REV. 6/2014)

Prescribed by GSA - FAR (48 CFR) 53.214 (c)

SEALED BID (IFB)

NEGOTIATED (RFP)

(Hour) (Date)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

N0017325RDH03

Section A - Solicitation/Contract Form

Camouflage Netting and Expeditionary Lifting Structures, Operational Test Support, and Joint Technology Transition

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

BASE YEAR LABOR - The contractor shall furnish all labor required to accomplish the requirements contained in the Statement of Work (SOW) entitled, "Camouflage Netting and Expeditionary Lifting Structures, Operational Test Support, and Joint Technology Transition," included as Attachment 1.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

BASE YEAR OTHER DIRECT COSTS (ODCs) - The contractor shall furnish necessary ODCs including travel and materials/equipment required to accomplish the requirements contained in the Statement of Work (SOW) entitled, "Camouflage Netting and Expeditionary Lifting Structures, Operational Test Support, and Joint Technology Transition" included as Attachment 1. ODCs shall be billed exclusive of fee. Travel will be IAW limitations set forth in FAR 31.205- 46 and Joint Travel Regulations.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

BASE YEAR DATA AND REPORTS - The Contractor shall furnish all data as required by the Contract Data Requirements List, DD Form 1423, which is hereby incorporated as Exhibit A.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

Option Line Item

OPTION I LABOR - The contractor shall furnish all labor required to accomplish the requirements contained in the Statement of Work (SOW) entitled, "Camouflage Netting and Expeditionary Lifting Structures, Operational Test Support, and Joint Technology Transition," included as Attachment 1.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

OPTION I OTHER DIRECT COSTS (ODCs) - The contractor shall furnish necessary ODCs including travel and materials/equipment required to accomplish the requirements contained in the Statement of Work (SOW) entitled, Option Line Item

"Camouflage Netting and Expeditionary Lifting Structures, Operational Test Support, and Joint Technology Transition" included as Attachment 1. ODCs shall be billed exclusive of fee. Travel will be IAW limitations set forth in FAR 31.205- 46 and Joint Travel Regulations.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

Option Line Item

OPTION I DATA AND REPORTS - The Contractor shall furnish all data as required by the Contract Data Requirements List, DD Form 1423, which is hereby incorporated as Exhibit A.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

Option Line Item

OPTION II LABOR - The contractor shall furnish all labor required to accomplish the requirements contained in the Statement of Work (SOW) entitled, "Camouflage Netting and Expeditionary Lifting Structures, Operational Test Support, and Joint Technology Transition," included as Attachment 1.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

Option Line Item

OPTION II OTHER DIRECT COSTS (ODCs) - The contractor shall furnish necessary ODCs including travel and materials/equipment required to accomplish the requirements contained in the Statement of Work (SOW) entitled, "Camouflage Netting and Expeditionary Lifting Structures, Operational Test Support, and Joint Technology Transition" included as Attachment 1. ODCs shall be billed exclusive of fee. Travel will be IAW limitations set forth in FAR 31.205- 46 and Joint Travel Regulations.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

Option Line Item

OPTION II DATA AND REPORTS - The Contractor shall furnish all data as required by the Contract Data Requirements List, DD Form 1423, which is hereby incorporated as Exhibit A.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

OPTION III LABOR - The contractor shall furnish all labor required to accomplish the requirements contained in the Statement of Work (SOW) entitled, "Engineering Support for EO/IR Measurements and Simulations," included as Attachment 1.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

Option Line Item

OPTION III OTHER DIRECT COSTS (ODCs) - The contractor shall furnish necessary ODCs including travel and materials/equipment required to accomplish the requirements contained in the Statement of Work (SOW) entitled, "Camouflage Netting and Expeditionary Lifting Structures, Operational Test Support, and Joint Technology Transition" included as Attachment 1. ODCs shall be billed exclusive of fee. Travel will be IAW limitations set forth in FAR 31.205- 46 and Joint Travel Regulations.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

Option Line Item

OPTION III DATA AND REPORTS - The Contractor shall furnish all data as required by the Contract Data Requirements List, DD Form 1423, which is hereby incorporated as Exhibit A.

Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 0001

1 Lot

Section C - Description/Specifications/Statement of Work

Requirements The services to be performed hereunder shall be subject to the requirements and standards contained in Attachment 1 - Statement of Work, Exhibit A - Contract Data Requirements List, and all other attachments cited in Section J, which are incorporated by reference into Section C.

Section D - Packaging and Marking

D-1 PRESERVATION, PACKAGING, PACKING, AND MARKING

All unclassified data and deliverable contract line items shall be preserved, packaged, packed and marked and must conform to normal commercial packing standards to assure safe delivery at destination.

D-2 UNCLASSIFIED AND CLASSIFIED MARKING

Unclassified data shall be prepared for shipment in accordance with requirements set forth in the contract, or if none are specified, pursuant to industry standards.

Classified reports, data, and documentation shall be prepared for shipment in accordance with 32 CFR Part 117, National Industrial Security Program Operating Manual (NISPOM) and the DD254 - Contract Security Classification Specification (Attachment 2).

D-3 MARKING OF SHIPMENTS AND REPORTS

The Contractor shall mark all shipments under this contract in accordance with the addition of ASTM-D-3951-18 "Standard Practice for Commercial Packaging" in effect on the date of the contract. The Contractor shall comply with FED STD 313 (Material Safety Data, Transportation Data, and Disposal Data for Hazardous Materials Furnished to Government Activities) to the extent applicable.

All reports delivered by the Contractor to the Government under this contract shall prominently show on the cover of the report:

Name and business address of the Contractor: * Contract number: *

*To be completed at contract award.

Section E - Inspection and Acceptance

E-1 INSPECTION AND ACCEPTANCE

Inspection and acceptance of the final delivery will be accomplished by the Contracting Officer Representative (COR) designated in Section G of this contract. Inspection and acceptance will be performed at the Naval Research Laboratory, 4555 Overlook Ave. SW, Washington, DC 20375-5320.

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.246-4 Inspection of Services-Fixed-Price. Aug 1996 52.246-9 Inspection of Research and Development (Short Form). Apr 1984 52.246-16 Responsibility for Supplies. Apr 1984

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Code 5009 Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Code 5009 Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Code 5009 Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Code 5009 Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Code 5009 Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Code 5009 Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Code 5009 Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Code 5009 Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Code 5009 Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Code 5009 Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Code 5009 Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Section F - Deliveries or Performance

F-1 SHIP TO INFORMATION

All deliverables required under this contract shall be shipped FOB Destination, Naval Research Laboratory, 4555 Overlook Ave. SW, Washington, DC 20375-5320.

All shipments delivered by the Contractor to the Government under this contract shall include the following "Attention To" on the shipping label:

* , COR

Naval Research Laboratory, 4555 Overlook Ave. SW, Washington, DC 23075-5320 Contract Number: * Building: * Code: *

*To be completed at contract award.

F-2 PLACE OF PERFORMANCE

The primary place of performance will be the Naval Research Laboratory, 4555 Overlook Ave. SW, Washington, DC 20375.

F-3 GOVERNMENT FURNISHED PROPERTY (GFP)

When GFP is required, a list of the GFP will be incorporated into this contract via an attachment following contract award, along with the following information:

The GFP will be provided by: * [date] The Government shall deliver the GFP to the following address: * [location] Upon completion of the contract, the GFP will be returned to: * [location or TBD]

*To be completed at contract award.

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC

Delivery Period From 30 Sep 2025 to 29 Sep 2026

Period of Performance From 30 Sep 2025 To 29 Sep 2026

1 Lot Ship To DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Delivery Period 1 Lot Ship To

From 30 Sep 2025 to 29 Sep 2026

Period of Performance From 30 Sep 2025 To 29 Sep 2026

DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Delivery Period From 30 Sep 2025 to 29 Sep 2026

Period of Performance From 30 Sep 2025 To 29 Sep 2026

1 Lot Ship To DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Delivery Period From 30 Sep 2026 to 29 Sep 2027

Period of Performance From 30 Sep 2026 To 29 Sep 2027

1 Lot Ship To DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Delivery Period From 30 Sep 2026 to 29 Sep 2027

Period of Performance

1 Lot Ship To DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil

From 30 Sep 2026 To 29 Sep 2027

Option Line Item

Delivery Period From 30 Sep 2026 to 29 Sep 2027

Period of Performance From 30 Sep 2026 To 29 Sep 2027

1 Lot Ship To DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Delivery Period From 30 Sep 2027 to 29 Sep 2028

Period of Performance From 30 Sep 2027 To 29 Sep 2028

1 Lot Ship To DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Delivery Period From 30 Sep 2027 to 29 Sep 2028

Period of Performance From 30 Sep 2027 To 29 Sep 2028

1 Lot Ship To DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Delivery Period From 30 Sep 2027 to 29 Sep 2028

1 Lot Ship To DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

Period of Performance From 30 Sep 2027 To 29 Sep 2028

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Delivery Period From 30 Sep 2028 to 29 Sep 2029

Period of Performance From 30 Sep 2028 To 29 Sep 2029

1 Lot Ship To DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Delivery Period From 30 Sep 2028 to 29 Sep 2029

Period of Performance From 30 Sep 2028 To 29 Sep 2029

1 Lot Ship To DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil Telephone: (202) 279-5272

Option Line Item

Delivery Period From 30 Sep 2028 to 29 Sep 2029

Period of Performance From 30 Sep 2028 To

1 Lot Ship To DoDAAC: N00173 CountryCode: USA

NAVAL RESEARCH LABORATORY

4555 OVERLOOK AVE SW, WASHINGTON DC 20375-5328

WASHINGTON, DC 20375-5328

UNITED STATES

Scott Ramsey, Head, Signature Technology Office Email: scott.a.ramsey30.civ@us.navy.mil

29 Sep 2029

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.242-15 Stop-Work Order. Aug 1989 52.247-34 F.o.b. Destination. Nov 1991

Section G - Contract Administration Data

G-1 CONTRACT ADMINISTRATION

In order to expedite administration of this contract, the following delineation of duties is provided, including the names and contact information, for each individual or office specified. Contact the individual/position designated as having responsibility for any questions, clarifications or information regarding the functions assigned herein.

(a) Contract Specialist: Deirdre Hughes; deirdre.l.hughes.civ@us.navy.mil Contracting Officer: Jason Calandruccio; jason.d.calandruccio.civ@us.navy.mil NRL Competition Advocate: * Security Matters: Security Branch, Code 1226; (202) 767-2240; security-group@nrl.navy.mil Safety Matters: Head Safety Branch, Code 3540; (202) 767-2232; safety@nrl.navy.mil

Intellectual Property Matters: All subject inventions must be properly reported through the iEdison system at https://www.nist.

gov/iedison as described in the award terms. For questions, please contact Associate Counsel (Intellectual Property), Code 1008.2; (202) 404-1558; patents@nrl.navy.mil

Release of Data: Public Affairs Officer, Code 1030; nrlpao@nrl.navy.mil. For FOIA information, see https://www.nrl.navy.mil /Contact-Us/FOIA/.

(b) The Contract Administration Office (CAO) designated in Block 24 on the Standard Form 33 is responsible for all matters specified in FAR 42.302(a) and DFARS 242.302(a), except in those areas otherwise designated herein.

(c) Contract administration functions withheld, additional contract administration functions assigned, or special instructions are set forth below:

Not Applicable

*To be completed at contract award.

G-2 CONTRACTING OFFICER'S REPRESENTATIVE - FUNCTIONS AND LIMITATIONS

(a) *; ** is hereby designated as the COR. Unless terminated sooner, this appointment is effective for the period of performance of this contract including any options, if exercised. COR authority may not be re-delegated. No change in COR assignment shall be made without written notice by the Contracting Officer, who will modify the contract to reflect the change of COR assignment. The Contracting Officer may designate assistant or alternate COR(s) to act for the COR by naming such assistant /alternate(s) in writing and transmitting a copy of such designation to the Contractor via contract modification.

(b) The responsibilities and limitations of the COR are as follows:

(1) Providing technical direction and guidance as necessary with respect to the performance of work under this contract.

Technical direction and guidance may be used to provide technical advice/recommendations/clarifications on the Statement of Work (SOW) /specifications. It MAY NOT be used to tell the Contractor how to perform the work.

(2) Submitting interim and final Contractor Performance Assessment Reports (CPARS) at www.cpars.csd.disa.mil/cparsmain.

htm.

(3) Quality assurance of services performed or deliveries made

(4) Inspection and acceptance of services or deliverables

(5) Ensuring that GFP, including any Contractor use of on-site equipment and/or IT resources, is adequately monitored and accounted for.

(6) Security requirements on Government installation, such as the request and retrieval of personnel security badges and vehicle passes.

(7) Monitoring Contractor's performance and promptly report problems and recommendations for corrective action to the PCO

(8) Annually, furnish a written report on performance of the Contractor to the PCO. And, if deemed necessary, attending a follow-up meeting to discuss.

(9) Attend post award conference, if conducted.

(10) Ensuring a copy of all Government technical correspondence, to include Technical Direction Memorandums/Guidance, is forwarded to the PCO for placement in the contract file.

(11) Monitoring of funds expended

(12) Ensuring that the Contractor does not exceed the defined SOW set forth in the contract.

(c) Limitations: The COR is not authorized to take any action, either directly or indirectly, that could result in a change in the cost/price, quantity, quality, place of performance, delivery schedule, or any other terms or conditions of the contract. If, as a result of technical discussions, it is desirable to alter contract obligations or the statement of work/specifications, a modification must be issued in writing and signed by the Contracting Officer in order to effect such changes. No such changes shall be made without the express written prior authorization/direction of the Contracting Officer.

*Name of COR to be filled in at contract award.

**Email address of COR to be filled in at contract award.

G-3 TECHNICAL DIRECTION MEMORANDUM (TDM)

(a) For the purposes of this clause, technical direction includes the following:

(1) Direction to the Contractor which shifts work emphasis between work areas or tasks, requires pursuit of certain lines of inquiry, fills in details or otherwise describes work which will accomplish the objectives described in the SoW;

(2) Guidelines to the Contractor, which assist in interpretation of drawings, specifications or technical portions of, work description.

(b) Technical instructions must be within the scope of work stated in the contract. Technical instructions may not be used to:

(1) Assign additional work under the contract:

(2) Direct a change as defined in the contract clause entitled "Changes";

(3) Increase or decrease the estimated contract cost, the fixed fee, or the time required for contract performance; or

(4) Change any of the terms, conditions or specifications of the contract

(c) The TDM shall be written by the Contracting Officer's Representative (COR), with the original given to the Contractor and a copy retained in the CORs file. Technical direction may be issued orally only in emergency situations. If technical direction is issued orally, a TDM must follow within two (2) working days from the date of the oral direction. Amendments, corrections, or changes to TDMs shall also be in written format and shall include all the information set forth in paragraph (e) below.

(d) A TDM shall be considered issued when the Government deposits it in the mail, or if transmitted by other means, when it is physically delivered to the Contractor.

(e) TDMs shall include, at a minimum, the following information:

(1) Date of TDM,

(2) Contract Number,

(3) Reference to the relevant portion or item in the SoW,

(4) The specific technical direction or clarification,

(5) The type of work to be performed, i.e., (a) SETA support or (b) R&D work,

(6) A reference to the appropriate CLIN or SubCLIN,

(7) The anticipated level of effort, materials and travel expected as a result of the TDM,

(8) The JON, Program Element, and associated dollar amount, and

(9) The signature of the COR

(f) CORs shall provide a copy of each TDM with the necessary increment of funds to the Contracting Officer for retention in the official contract file. CORs shall retain all files containing TDMs for a period of two (2) years after the final contract completion date.

(g) The only individual authorized in any way to amend or modify any of the terms of this contract shall be the Contracting Officer.

When, in the opinion of the Contractor, any technical direction calls for effort outside the scope of the contract or inconsistent with this special clause, the Contractor shall notify the Contracting Officer in writing within ten (10) working days after its receipt.

G-4 IDENTIFICATION OF CONTRACTOR PERSONNEL ON-SITE AT NRL

Pursuant to DFARS 211.106, contractor employees shall identify themselves as contractor personnel by introducing themselves or being introduced as contractor personnel and displaying distinguishing badges or other visible identification for meetings with Government personnel. In addition, contracts shall require contractor personnel to appropriately identify themselves as contractor employees in telephone conversations and in formal and informal written correspondence.

G-5 ELECTRONIC AND INFORMATION TECHNOLOGY (EIT)

In accordance with Section 508 of the Rehabilitation Act of 1973 (29 U.S.C. 794d), all EIT supplies and services provided under any resulting award must comply with the applicable accessibility standards issued by the Architectural and Transportation Barriers Compliance Board at 36 CFR part 1194 (see FAR Subpart 39.2). Electronic and information technology (EIT) is defined at FAR 2.101.

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.201-7000 Contracting Officer's Representative. Dec 1991 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.

WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice/Receiving Report (Combo)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.

when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC TBD

Issue By DoDAAC N00173

Admin DoDAAC TBD

Inspect By DoDAAC N00173

Ship To Code N00173

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) N00173

Service Acceptor (DoDAAC) N00173

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

* To be completed at contract award.

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section H - Special Contract Requirements

H-1 KEY PERSONNEL

(a) The Contractor agrees to assign to the contract tasks those persons whose resumes were submitted with its proposal and who are necessary to fulfill the requirements of the contract as "key personnel". No substitutions may be made except in accordance with this clause.

(b) The Contractor understands that during the first ninety (90) days of the contract performance period, no personnel substitutions will be permitted unless these substitutions are unavoidable because of the incumbent's sudden illness, death or termination of employment. In any of these events, the Contractor shall promptly notify the Contracting Officer and provide the information described in paragraph (c) below. After the initial ninety (90) day period the Contractor must submit to the Contracting Officer all proposed substitutions, in writing, at least thirty (30) days in advance (sixty (60) days if security clearance must be obtained) of any proposed substitution and provide the information required by paragraph (c) below.

(c) Any request for substitution must include a detailed explanation of the circumstances necessitating the proposed substitution, a resume for the proposed substitute, and any other information requested by the Contracting Officer. Any proposed substitute must have qualifications equal to or superior to the qualifications of the incumbent. The Contracting Officer or his/her authorized representative will evaluate such requests and promptly notify the Contractor of his/her approval or disapproval thereof.

(d) In the event that any of the identified key personnel cease to perform under the contract and the substitute is disapproved, the contract may be immediately terminated in accordance with the Termination clause of the contract.

(e) Named Key Personnel are as follows:

Employee Name Key Labor Category

* Program Manager IV - A

* Chief Scientist IV - B

* To be filled in at contract award.

H-2 GOVERNMENT PROPERTY

a. Government-Furnished Property. Government-furnished property, data, or services shall be identified, if applicable.

b. Contractor Acquired Property. In the event the contractor is required to purchase property in the performance of this contract, compliance with the procedures of FAR Part 45.402, Government Property, is required.

c. Disposition of Government Property. Thirty (30) days prior to the end of the period of performance, or upon termination of the contract, the contractor shall furnish to the COR a complete inventory of all Government Property in their possession under the contract that has not been tested to destruction, completely expended in performance, or incorporated and made a part of a deliverable end item. The COR will furnish disposition instructions on all listed property which was furnished or purchased under this contract.

H-3 NOTICE OF INCOPORATION OF SECTION K

Section K of the solicitation (Representation, Certifications and Other Statements of Offerors) will not be distributed with the contract; however it is incorporated in and forms a part of the resultant contract as though furnished in full text therewith.

H-4 SPECIAL CONTRACT REQUIREMENT REGARDING NON-DISCLOSURE OF INFORMATION

Data includes all data, information and software, regardless of the medium (e.g. electronic or paper) and/or format in which the data exists, and includes data which is derived from, based on, incorporates, includes or refers to such data. In the course of performing this Contract, the Contractor may be or may have been given access to: Source Selection Information [as defined in Federal Acquisition Regulation (FAR) 3.104]; data that has been assigned (or data that is generated by the Contractor that should be assigned) a contractually required or other Government distribution control (such as a Distribution Statement prescribed in DoD Directive 5230.24); and/or data that has been given a restrictive legend by the source of the data such as "business sensitive," "proprietary," "confidential," or word(s) with similar meaning that impose limits on the use and distribution of the data (see for example FAR 52.215-1(e)). All such data with limitations on use and distribution are collectively referred to herein as "protected data."

This Special Contract Requirement supplements and implements Defense FAR Supplement (DFARS) 252.204-7000, "DISCLOSURE OF INFORMATION." As a condition to receiving access to protected data, the Contractor shall: (1) prior to having access to protected data, obtain the agreement of the source of the protected data to permit access by the Contractor to such protected data; (2) use the protected data solely for the purpose of performing duties under this Contract unless otherwise permitted by the source of the protected data; (3) not disclose, release, reproduce or otherwise provide or make available the protected data, or any portion thereof, to any employee of the Contractor unless and until such employee has been informed of the restrictions on use and distribution of the protected data and agreed in writing to conform with the applicable restrictions; (4) not disclose, release, reproduce or otherwise provide or make available the protected data, or any portion thereof, to any non- Government person or entity (including, but not limited to, affiliates, subcontractors, successors and assignees of the Contractor), unless the Contracting Officer and the source of the protected data have given prior written approval (which shall be conditioned upon the person receiving the protected data having been informed of the restrictions on use and distribution of the protected data and having agreed in writing to conform with the applicable restrictions; (5) establish and execute safeguards to prevent the unauthorized use or distribution of protected data.

Any unauthorized use, disclosure or release of protected data may result in substantial criminal, civil and/or administrative penalties to the Contractor or to the individual who violates a restriction on use or distribution of protected data. Any agreement with another company regarding access to that company's protected data shall not create any limitation on the Government or its employees with regard to such data. A copy of each executed company and individual non-disclosure agreement relating to this Contract shall be provided to the COR.

Appropriate restrictive legends will be included by the Contractor on any copies and reproductions made of all or any part of the protected data and any data that is derived from, based upon, incorporates, includes or refers to the protected data. When the Contractor's need for such protected data ends, the protected data shall be returned promptly to the source of the protected data with notice to the COR. However, the obligation not to use, disclose, release, reproduce or otherwise provide or make available such protected data, or any portion thereof, shall continue, even after completion of the Contract, for so long as required by the terms of any agreement pertaining to the protected data between the Contractor and the source of the protected data, or (in the case of Government information) for so long as required by applicable law and regulation. Any actual or suspected unauthorized use, disclosure, release, or reproduction of protected data or violation of this agreement, of which the company or any employee is or may become aware, shall be reported promptly (within one business day after discovery and confirmation) to the COR.

H-5 ORGANIZATIONAL CONFLICT OF INTEREST

(a) Definitions.

The term "contractor" includes the Contractor and its employees, affiliates, marketing consultants (if any), consultants, and subcontractors at all tiers.

"Organizational Conflict of Interest" ("OCI") means that because of other activities or relationships with other persons, a person is unable or potentially unable to render impartial assistance or advice to the Government, or the person's objectivity in performing the contract work is or might be otherwise impaired, or a person has an unfair competitive advantage. FAR 2.101.

An OCI may result when (1) activities or relationships create an actual or potential conflict of interest related to the performance of the Statement of Work (SOW) of this Contract; or, (2) when the nature of the SOW on this Contract creates an actual or potential conflict of interest with respect to the Contractor in relation to a future acquisition.

"Marketing consultant," means any independent contractor who furnishes advice, information, direction, or assistance to an offeror or any other contractor in support of the preparation or submission of an offer for a Government contract by that offeror.

An independent contractor is not a marketing consultant when rendering-- (1) Services excluded in FAR Subpart 37.2; (2) Routine engineering and technical services (such as installation, operation, or maintenance of systems, equipment, software, components, or facilities); (3) Routine legal, actuarial, auditing, and accounting services; and (4) Training services.

(b) In accordance with the guidance in FAR Subpart 9.5, the Contracting Officer has determined that potentially significant organizational conflicts of interest (OCIs) could result if the Contractor is allowed to participate (at any level) in future Federal Government acquisitions that include requirements that may be established or affected by the performance of the SOW by the Contractor under this Contract.

(c) It is understood and agreed that the Contractor may be ineligible (unless expressly exempted as provided in FAR Part 9.5) to act as a prime contractor, subcontractor, or consultant or subcontractor to any prime contractor or subcontractor at any tier, for any future requirements (for services, systems, or components of systems) procured by any Federal Government activity where the Contractor, in performance of the SOW under this Contract, has provided or is providing support (as described in FAR 9.505- 1 through 9.505-4) that establishes or affects future requirements or may affect the future competition

(d) The contracting officer responsible for securing future requirements, in his/her sole discretion, may make a determination to exempt the Contractor from ineligibility as described in subparagraph (c) above provided the Contractor submits an acceptable mitigation plan.

(1) Items for consideration in a mitigation plan include the following: identification of the organizational conflict(s) of interest; a reporting and tracking system; an organizational conflict of interest compliance/enforcement plan, to include employee training and sanctions, in the event of unauthorized disclosure of sensitive information; a plan for organizational segregation (e.g., separate reporting chains); data security measures; and, non-disclosure agreements.

(2) The Government's determination regarding the adequacy of the mitigation plan or the possibility of mitigation is a unilateral decision made solely at the discretion of the Government and is not subject to the Disputes clause of the contract. The Government may terminate the contract for default if the Contractor fails to implement and follow the procedures contained in any approved mitigation plan.

(3) Nothing contained herein shall preclude the contracting officer in future Federal Government acquisitions from making his /her own determination as to whether an OCI exists and whether any such OCI has been successfully mitigated.

(e) The Contractor shall apply this clause to any subcontractors or consultants who: have access to proprietary information received or generated in the performance of this Contract; and/or, who participate in the development of data, or participate in any other activity related to this Contract which is subject to the terms of this clause at the prime contractor level.

(f) The Contactor agrees that it and its subcontractors at all levels shall use reasonable diligence in protecting proprietary data /information that is received or generated in performance of this Contract in accordance with this clause and any other clause of this Contract pertaining to the nondisclosure of information. The Contractor further agrees that neither it nor its subcontractors will willfully disclose proprietary data/information that is received or generated in the performance of this Contract without the prior permission of the Contracting Officer, and that proprietary information shall not be duplicated, used or disclosed, in whole or part, for any purpose other than to accomplish the work required by the Contract.

(g) The Contractor and its Subcontractors at all levels shall inform their employees that they are required to comply with the applicable requirements and restrictions contained in: restrictive markings applicable to data/information that they receive or generate in the performance of this Contract; FAR Subpart 9.5 pertaining to actual or potential OCIs; FAR 3.104 pertaining to requirements and restrictions under the Procurement Integrity Act; and, Defense FAR Supplement (DFARS) 252.204-7000 pertaining to "Disclosure of Information."

(h) The Contractor agrees to enter into written agreements with all companies whose proprietary data it shall have access to and to protect such data from unauthorized use or disclosure as long as it remains proprietary. The Contractor shall furnish to the Contracting Officer copies of these written agreements. The Contractor agrees to protect the proprietary data and rights of other organizations disclosed to the Contractor during performance of this Contract with the same caution that a reasonably prudent Contractor would use to safeguard its own highly valuable property. The Contractor agrees to refrain from using proprietary information for any purpose other than that for which it was furnished.

(i) The Contractor shall not distribute reports, data or information of any nature received or arising from its performance under this Contract, except as provided by this Contract or as may be directed by the Contracting Officer.

(j) The Contractor agrees that if in the performance of this Contract it discovers a potential OCI, a prompt and full disclosure shall be made in writing to the Contracting Officer. This disclosure shall include a description of the actions the Contractor has taken, or proposes to take, to avoid or mitigate such conflicts.

H-6 REPORT PREPARATION

Scientific or technical reports prepared by the Contractor and deliverable under the terms of this contract will be prepared in accordance with format requirements contained in ANSI/NISO Z39.18-2005 (R2010) Scientific and Technical Reports - Preparation, Presentation, and Preservation.

[NOTE: All NISO American National Standards are available as free, downloadable pdf(s) at http://www.niso.org/standards /index.html. NISO standards can also be purchased in hardcopy form from NISO Press Fulfillment, P. O. Box 451, Annapolis Junction, MD 20701-0451 USA. Telephone U.S. and Canada: (877) 736-6476; Outside the U.S. and Canada: 301-362-6904 fax:

301-206-9789.]

H-7 INCORPORATION OF TECHNICAL PROPOSAL

The Contractor's technical proposal dated * , submitted in response to Solicitation N0017325RDH03, is hereby incorporated into the contract by reference.