Solicitation - FA558726Q0036.pdf

Combined/Synopsis Solicitation IAW RFO Part 12 – Acquisition of Commercial Products and Commercial Services

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in RFO Part 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quote (RFQ), in accordance with RFO Part 12.

Solicitation number: FA558726Q0036 North American Industry Classification System Code (NAICS): 336413 Size standard: N/A Type of set-aside: N/A due to overseas location

This requirement is for an ISU 90I meeting the characteristics and objectives outlined in Attachment 1 - Salient Characteristics. Please see the following attachments:

Attachment 1 –Salient Characteristics Attachment 2 – Quote Sheet

Provision 52.212-1, Instructions to Offerors – Commercial, applies to this acquisition.

Addendum to 52.212-1, Instructions to Offerors – Commercial, applies to this acquisition.

Provision 52.212-2, Evaluation – Commercial Items, applies to this acquisition.

Addendum to 52.212-2, Evaluation - Commercial Items (Oct 2014), applies to this acquisition.

Provision 52.204-7, System for Award Management—Registration, or a cage code proving an active System for Award Management registration, shall be submitted with all offers.

Clause 52.212-4, Contract Terms and Conditions—Commercial Items, applies to this acquisition.

Questions must be submitted and received by the Points of Contact listed below no later than 14:00 GMT/BST on 31 July 2026. Questions received after this deadline will not be reviewed or considered.

Quotes must be received no later than 14:00 GMT/BST on 7 August 2026 by the 48th Contracting Squadron, via e-mail to the following Points of Contact (POCs):

Primary: Marcus Howard – marcus.howard.8@us.af.mil Secondary: Michael Ochoa - michael.ochoa.6@us.af.mil

Solicitation/Contract Form

321 STS - ISU 901

321 STS is in need of an ISU 901.

Product Service Code: 8145

FA558726Q0036

Supplies or Services & Prices or Costs

Additional lnfonna11on/No1Bs

Item Supplles / Services

ISU-90I

0001 Product Type Code: 8145 Product Service Code: 8145 Pricing Arrangement: Firm Fixed Price

Quantity Unit

1 Each

Unit Price

FA558726Q0036

Amount

DescriptionJSpecifications/Statement of Work

Requirements

FY26 F3034 6V1380 321 STS AR MAG UFR FM9

Packaging and Marking

Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

0001 Inspection and Acceptance Location

Both Destination Instructions: See salient characteristics for inspect/accept criteria.

DoDAAC: F3BTS1 CountryCode: USA

F3BTS1 752 SOG CC

AF BPN NO MILSBILLS PROCESSES, UNIT 4710

APO, AE 09459-4710

UNITED STATES

Deliveries or Performance

Uneltem Dellv8ry Schedule Quantity

Delivery On Or Before 1 Each Delivery Date 26 Oct 2026

FAR Clauses Incorporated by Reference

Number

52.247-34

T1lle

F.o.b. Destination.

Address and POC

Ship To DoDAAC: F3BTS1

F3BTS1 752 SOG CC

AF BPN NO MILSBILLS PROCESSES

UNIT 4710

APO, AE 09459-4710

FA558726Q0036

Special Handllng/Notes

FoB Details Contractor FoB Point

Alternate/ Variation Effecllv8 Date Deviation Effecllv8

Date Jan 1991

Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Trtle

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

252.232-7008 Assignment of Claims (Overseas).

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area Workflow Payment lnsbUclions. (Tailored)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause-

Effective Date

Dec2018 Jun 1997

(Jan2023)

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

FA558726Q0036

Alternate/ Variation Deviation Effective

Date

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense

Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

COMBO

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WA WF

Pay Official DoDAAC F87700 ---

Issue By DoDAAC FA5587

Admin DoDAAC FA5587 ---

Inspect By DoDAAC F3BTS1

Ship To Code F3BTS1

Ship From Code N/A -

Mark For Code F3BTS1

Service Approver (DoDAAC) N/A -

Service Acceptor (DoDAAC) N/A -

Accept at Other DoDAAC N/A -

LPO DoDAAC N/A -

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A -

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WA WF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

kim.baker.3.gb@us.af.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Special Contract Requirements

Contract Clauses

FAR Clauses Incorporated by Reference

Number

52.203-19 52.204-13 52.204-19 52.204-91 52.209-6

52.209-10 52.212-4 52.222-19 52.222-50 52.223-5 52.226-8 52.229-12 52.232-33 52.232-39 52.232-40 52.233-3 52.233-4 52.240-91 52.240-92 52.243-1 52.244-6 52.249-1

Tille

Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

System for Award Management-Maintenance. (Deviation 2026-00038) Incorporation by Reference of Representations and Certifications.

Contractor Identification. (Deviation 2026-00038) Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-00038) Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026-00038) Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026-00038) Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-00038) Combating Trafficking in Persons. (Deviation 2026-00038) Pollution Prevention and Right-to-Know Information.

Encouraging Contractor Policies to Ban Text Messaging While Driving.

Tax on Certain Foreign Procurements. (Deviation 2026-00038) Payment by Electronic Funds Transfer-System for Award Management.

Unenforceability of Unauthorized Obligations.

Providing Accelerated Payments to Small Business Subcontractors.

Protest after Award. (Deviation 2026-00038) Applicable Law for Breach of Contract Claim. (Deviation 2026-00038) Security Prohibitions and Exclusions. (Deviation 2026-00038) Security Requirements. (Deviation 2026-00038) Changes-Fixed-Price. (Deviation 2026-00038) Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-00038) Termination for Convenience of the Government (Fixed-Price) (Short Form).

DFARS Clauses Incorporated by Reference

Number

252.203-7000 252.203-7002 252.204-7015 252.204-7018 252.204-7022 252.223-7006 252.223-7008 252.225-7001 252.225-7002 252.225-7012 252.225-7041 252.225-7048 252.225-7056 252.225-7060 252.229-7006 252.229-7007 252.229-7008 252.232-7010 252.233-7001 252.243-7001 252.244-7000 252.247-7023

T1tle

Requirements Relating to Compensation of Former DoD Officials.

Requirement to Inform Employees of Whistleblower Rights.

Notice of Authorized Disclosure of Information for Litigation Support.

Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Expediting Contract Closeout.

Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

Prohibition of Hexavalent Chromium.

Buy American and Balance of Payments Program.

Qualifying Country Sources as Subcontractors.

Preference for Certain Domestic Commodities.

Correspondence in English.

Export-Controlled Items.

Prohibition Regarding Business Operations with the Maduro Regime.

Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

Value Added Tax Exclusion (United Kingdom) Verification of United States Receipt of Goods.

Relief from Import Duty (United Kingdom).

Levies on Contract Payments.

Choice of Law (Overseas).

Pricing of Contract Modifications.

Subcontracts for Commercial Products or Commercial Services.

Transportation of Supplies by Sea.

FAR Clauses Incorporated by Full Text

52.252-2 Clauses lncorporalad by Reference. (Tailored)

Clauses Incorporated By Reference (Feb 1998)

Effective Date

Jan 2017 Feb 2026 Dec2014 Feb 2026 Feb 2026

Feb 2026 Feb 2026 Mar2026 Feb 2026 May2024 May2024 Feb 2021 Oct2018 Jun 2013 Mar2023 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Apr2026 Apr1984

Effecllv8 Date

Sep 2011 Dec2022 Jan 2023 Jan 2023 May2021 Sep 2014 Jan 2023 Feb 2024 Mar2022 Apr2022 Jun 1997 Jun 2013 Jan 2023 Jun 2023 Dec 2011 Jun 1997 Dec 2011 Dec2006 Jun 1997 Dec 1991 Nov2023 Oct2024

(Feb 1998)

FA558726Q0036

Alternate/ Variation Deviation Effecliva

Date

Alternate/ Variation Deviation Effecllv8

Date

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/

(End of clause)

52.252-6 Authorized Deviations In Clauses. (Tallored)

Authorized Deviations in Clauses (Nov 2020)

(Nov2020)

FA558726Q0036

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of

"(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Defense Federal Acquisition Regulation Supplement clause with an authorized deviation is indicated by the addition of

"(DEVIATION)" after the name of the regulation.

(End of clause)

DFARS Clauses Incorporated by Full Text

252.211-7003 llem Unique Identification and Valuatlon. (Tallored) (Jan2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/lnternational Electrotechnical

Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https:llwww.acq.osd.mil/asdaldpclceldslunique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor"s estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency

Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https.1/www.acq.osd.mil/asda/dpc/ce/dslunique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government"s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number =·

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense

Acquisition Program as specified in Attachment Number =·

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD

Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC

International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (Als) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology- EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier

Standard.

(B) Data Identifiers (Dis) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier

Standard.

(C) Text Element Identifiers (TEis) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association

Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for

Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL

STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1 )(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1 )(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(1 O) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

FA558726Q0036

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1 )(iii) of this clause or when item unique identification is provided under paragraph (c)(1 )(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).••

(5) Enterprise identifier (if concatenated unique item identifier is used).••

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(1 O) Serial number (if concatenated unique item identifier is used).**

(11) Description.

•• Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in)=' Unique Item Identifier Report for Embedded Items, Contract Data

Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

252.225-7043 Antiterrorismlforce Protection for Defense Contractors Outside the Unilad Stales. (Tailored) {Jun 2015)

ANTITERRORISM/FORCE PROTECTION POLICY FOR DEFENSE CONTRACTORS OUTSIDE THE UNITED STATES (JUN 2015)

(a) Definition. " United States , " as used in this clause, means, the 50 States, the District of Columbia , and outlying areas.

(b) Except as provided in paragraph (c) of this clause, the Contractor and its subcontractors, if performing or traveling outside the United States under this contract, shall-

(1) Affiliate with the Overseas Security Advisory Council, if the Contractor or subcontractor is a U.S. entity;

(2) Ensure that Contractor and subcontractor personnel who are U.S. nationals and are in-country on a non-transitory basis, register with the U.S. Embassy, and that Contractor and subcontractor personnel who are third country nationals comply with any security related requirements of the Embassy of their nationality;

(3) Provide, to Contractor and subcontractor personnel, antiterrorism/force protection awareness information commensurate with that which the Department of

Defense (DoD) provides to its military and civilian personnel and their families, to the extent such information can be made available prior to travel outside the United

States; and

(4) Obtain and comply with the most current antiterrorism/force protection guidance for Contractor and subcontractor personnel.

(c) The requirements of this clause do not apply to any subcontractor that is

(1) A foreign government;

(2) A representative of a foreign government; or

(3) A foreign corporation wholly owned by a foreign government.

(d) Information and guidance pertaining to DoD antiterrorism/force protection can be obtained from the appropriate Antiterrorism/Force Protection Office at the

Command Headquarters. Also see https://atep.dtic.mil.

(End of clause)

252.229-7001 Tax Relief. (Tallored) {Apr2020)

TAX RELIEF-BASIC (APR 2020)

(a) Prices set forth in this contract are exclusive of all taxes and duties from which the United States Government is exempt by virtue of tax agreements between the

United States Government and the Contractor's government. The following taxes or duties have been excluded from the contract price:

NAME OF TAX: ValueAddedTax(VAV RATE (PERCENTAGE): 20

(b) Invoices submitted in accordance with the terms and conditions of this contract shall be exclusive of all taxes or duties for which relief is available. The Contractor's invoice shall list separately the gross price, amount of tax deducted, and net price charged.

(c) When items manufactured to United States Government specifications are being acquired, the Contractor shall identify the materials or components intended to be imported in order to ensure that relief from import duties is obtained. If the Contractor intends to use imported products from inventories on hand, the price of which includes a factor for import duties, the Contractor shall ensure the United States Government's exemption from these taxes. The Contractor may obtain a refund of the import duties from its government or request the duty-free import of an amount of supplies or components corresponding to that used from inventory for this contract.

(End of clause)

List of Attachments

Representations, Certification, & Other Statements

FAR Clauses Incorporated by Reference

Number

52.240-90

Tille

Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026-00038)

DFARS Clauses Incorporated by Reference

Number

252.203-7005 252.225-7055 252.225-7059

Trtle

Representation Relating to Compensation of Former DoD Officials.

Representation Regarding Business Operations with the Maduro Regime.

Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-Representation.

FAR Clauses Incorporated by Full Text

52.204-90 Offeror Identification. (Deviation 2026-00038)

Offerer Identification (Feb 2026) (Deviation 2026-00038)

Effective Date

Feb 2026

Effective Date

Sep 2022 May2022 Jun 2023

(Feb2026)

FA558726Q0036

Alternate/ Variation Deviation Effecliva

Date

Alternate/ Variation Deviation Effecliva

Date

If the Offerer will not have an active Federal Government contracts registration in the System for Award Management (https://www.sam.gov) when submitting its offer, it shall complete paragraphs (c) and (d) of this provision and include its responses with its offer.

(a) Definitions. As used in this provision-

Commercial and Government Entity (CAGE) code has the meaning provided in the clause at FAR 52.204-91, Contractor Identification, of this solicitation.

Common parent means that corporate entity that owns or controls an affiliated group of corporations that files its Federal income tax returns on a consolidated basis, and of which the offerer is a member.

Electronic Funds Transfer (EFT) indicator means a bank account identifier to establish additional System for Award Management records for identifying alternative EFT accounts (see part 32) for the same entity.

Highest-level owner means the entity that owns or controls an immediate owner of the offerer, or that owns or controls one or more entities that control an immediate owner of the offerer. No entity owns or exercises control of the highest-level owner.

Immediate owner means an entity, other than the offerer, that has direct control of the offerer. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. There may be more than one immediate owner (e.g., joint ventures).

Predecessor means an entity whose assets were acquired by the offerer or another entity (most often through merger or acquisition) and whose affairs are now carried out by the offerer or the other entity under a new name.

Taxpayer Identification Number means the number required by the Internal Revenue Service (IRS) to be used by the offerer to report income tax and other returns. It may be either a Social Security Number or an Employer Identification Number.

Unique entity identifier (UEI) has the meaning provided in the clause at FAR 52.204-91, Contractor Identification, of this solicitation.

(b) Unique entity identifier (UEI).

(1) The Offerer shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the UEI that identifies the Offerer's name and address exactly as stated in the offer. The Offerer shall also enter its EFT indicator, if applicable.

(2) If the Offerer does not have a UEI, it shall go to https://www.sam.gov to obtain one. The Government will independently validate the existence and uniqueness of the

Offeror before assigning a UEI.

(c) Taxpayer identification. The Offeror shall provide with its offer the following information that is necessary to comply with debt collection requirements of 31 U.S.C.

7701 (c) and 3325(d); reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M; and the implementing IRS regulations:

(1) Taxpayer identification number (TIN)

[]TIN:_;

[] TIN has been applied for; or

[] TIN is not required because:

[] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the

United States and does not have an office or place of business or a fiscal paying agent in the United States;

[ ] Offeror is an agency or instrumentality of a foreign government; or

[ ] Offeror is an agency or instrumentality of the Federal Government.

(2) Type of organization.

I I Sole proprietorship;

I I Partnership;

[] Corporate entity (not tax-exempt);

[] Corporate entity (tax-exempt);

[] Government entity (Federal, State, or local);

[ ] Foreign government;

[] International organization per 26 CFR 1.6049-4; or

I I Other.

(3) Common parent.

[] Offeror is not owned or controlled by a common parent as defined in paragraph (a) of this provision; or

[] Name and TIN of common parent

Name:

TIN:

(4) The TIN provided in paragraph (c)(1) of this provision may be matched with IRS records to verify the accuracy of the Offeror"s TIN. The Government may use the TIN to collect and report on any delinquent amounts arising out of the Offeror's relationship with the Government (31 U.S.C. 7701 (c)(3)).

(d) Commercial and Government Entity (CAGE) code.

(1) The Offeror shall provide its CAGE code with its offer with its name and location address or otherwise include it prominently in its offer. The CAGE code shall be for that name and location address. Insert the word "CAGE" before the code. The Offeror may obtain a CAGE code as indicated in the following table.

If the Offeror is ... Then ...

Located in the United States or its outlying areas Submit a request to the DLA CAGE Branch via https://cage.dla.mil

Located outside the United States and its outlying areas and its country is a member of the North Atlantic Treaty Organization (NATO) or a sponsored nation Contact the appropriate National Codification Bureau ( https://www.nato.inUstructur/ac/135/abouUcontacts)

Located outside the United States and its outlying areas and its country is not a member of NATO or a sponsored nation Contact the NATO Support and Procurement Agency (NSPA) ( https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx)

(2) The Offeror shall provide the CAGE code and legal business name (Do not use a "doing business as" name) for-

(i) Its immediate owner(s), if any;

(ii) Its highest-level owner, if any; and

(iii) Any predecessor(s), or predecessor of an Offeror"s predecessor, that held a Federal contract or grant within the last three years.

Owner Type

Immediate owner

Highest-level owner

Predecessor"

CAGE Code

* Predecessor CAGE code may be marked "Unknown."

Legal Business Name

FA558726Q0036

(3) If the Offeror has more than one immediate owner (such as a joint venture), give the information for each owner (or joint venture participant). If the Offeror has more than one predecessor, provide information for each predecessor in reverse chronological order.

(End of provision)

52.209-2 Prohibition on Contracting With l11V8rtad Domestic Corporations-Representation. (Deviation 2026-00038) (Feb2026)

Prohibition on Contracting with Inverted Domestic Corporations-Representation (Feb 2026) (Deviation 2026-00038)

(a) Definitions. As used in this clause-

Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Subsidiary means an entity in which more than 50 percent of the entity is owned-

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

(b) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-3(b) applies or the requirement is waived in accordance with the procedures at 9.108-5.

(c) Representation. The Offeror represents that-

(1) It [] is, [] is not an inverted domestic corporation; and

(2) It [ ] is, [ ] is not a subsidiary of an inverted domestic corporation.

(End of provision)

52.209-11 Representation by Corporations Regarding Dellnquent Tax Uablllty or a Felony Conviction under any Federal (Feb 2026) Law. (Deviation 2026-00038)

Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Feb 2026) (Deviation 2026-00038)

(a) The Government will not enter into a contract with any corporation that-

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offerer represents that-

(1) It is [] is not [] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of provision)

DFARS Clauses Incorporated by Full Text

252.204-7016 Covered Defense Telecommunlcatlons Equipment or Services-Representation. (Dec2019)

COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-REPRESENTATION (DEC 2019)

(a) Definitions. As used in this provision, "covered defense telecommunications equipment or services" has the meaning provided in the clause 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

(b) Procedures. The Offerer shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered defense telecommunications equipment or services".

(c) Representation. The Offerer represents that it [] does, [] does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(End of provision)

252.204-7017 Prohibition on 1he Acquisition of Covered Defense Telecommunlcatlons Equipment or Services Representation.

(May2021)

PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)

The Offerer is not required to complete the representation in this provision if the Offerer has represented in the provision at 252.204-7016, Covered Defense

Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."

(a) Definitions. "Covered defense telecommunications equipment or services," "covered mission," "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) Prohibition. Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) Procedures. The Offerer shall review the list of excluded parties in the System for Award Management (SAM) at https://www.sam.gov for entities that are excluded when providing any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

(d) Representation. If in its annual representations and certifications in SAM the Offerer has represented in paragraph (c) of the provision at 252.204-7016, Covered

Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offerer shall complete the following additional representation:

The Offeror represents that it [ ] will [ ] will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) Disclosures. If the Offeror has represented in paragraph (d) of this provision that it "will provide covered defense telecommunications equipment or services," the

Offeror shall provide the following information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government

Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

(End of provision)

Instructions, Conditions, & Notices to Offerors or Quoters

RFO provision 52.212-1, Instructions to Offarors --Commercial, applles to this acquisition.

As prescribed in RFO 12.205(a), the following addendum is provided for this solicitation and hereby amends any language therein:

1. Quotes emailed to Marcus Howard (Primary) at marcus.howard.8@us.af.mil and Michael Ochoa (Secondary) at michael.ochoa.6@us.af.mil.

FA558726Q0036

2. All price quotations must be submitted on Attachment 2 - Quote Sheet. This is a Firm-Fixed Price (FFP) requirement. A FFP contract provides for a price that is not subject to any adjustment on the basis of the contractor's cost experience in performing the contract. Each line item described in Attachment 2 - Quote Sheet shall be priced in this fashion. Failure to provide pricing on any line item may result in the vendor being deemed unacceptable, and subsequently being removed from consideration for award. To be eligible for contract award, the vendor shall have an active System for Award Management (SAM) account. Failure to have an active SAM registration may result in the vendor being deemed ineligible for contract award. Vendor shall provide their CAGE Code or NCAGE Code at time of submitting Attachment 2 - Quote Sheet.

3. Technical documentation submitted by the vendor shall be provided via e-mail in a separate document and shall not exceed 20 pages. Failure to adhere to these standards may result in the vendor being deemed non-responsive, and subsequently being removed from consideration for award.

4. Questions must be submitted and received by the Points of Contact listed above no later than 14:00 GMT/BST on 31 July 2026. Questions received after this deadline will not be reviewed or considered.

5. Quotes shall be submitted and received no later than 14:00 GMT/BST on 7 August 2026 by the 48th Contracting Squadron, via e-mail to the Points of Contact (POCs) identified in the combined synopsis/solicitation.

6. Late Quotes may be processed in accordance with RFO 52.212-1 (c) - Late submissions, modifications, revisions, and withdraws of offers.

7. By submitting a quote in response to this solicitation the vendor agrees to hold the prices provided in Attachment 2 - Quote Sheet firm for 60 calendar days from the date specified for receipt of quotes. Any quote submitted in a currency other than U.S. dollar (USD) will be converted to USD utilizing the exchange rate located at https:// comptroller.defense.gov/Financial-Management/Reports/ fcfr/#2024.

Ombudsman

1. An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

2. Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of 0MB Circular A-76 competition performance decisions).

3. If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman. Mr. Alex Hight AFICC/KU, Unit 3103, APO, AE 09094-3103

AFICC/KU, Geb 404, Flugplatz, Ramstein, 66877 Ramstein-Miesenbach, Germany E-mail: alex.hight@us.af.mil Tel Comm: (49) 6371-47-2209 DSN (314) 480-2209 Mr.

Alexander Larsen AFICC/KU, Unit 3103, APO, AE 09094-3103 AFICC/KU, Geb 404, Flugplatz, Ramstein, 66877 Ramstein-Miesenbach, Germany E-mail:

alexander.larsen.1@us.af.mil Tel Comm: (49) 6371-47-5938 DSN (314) 480-5938. Concerns, issues, disagreements, and recommendations that cannot be resolved at the

Center/MAJCOM/FLDCOM/DRU ombudsman level, may be brought by the interested party for further consideration to the Department of the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

4. The ombudsman has no authority to render a decision that binds the agency.

5. Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.

Sustainable Producls and Services

1. Requiring activities must obtain approval in accordance with AFMAN 32-7002 Environmental Compliance and Pollution Prevention, paragraph 3.3.5.1.1.8 before a…