Sol_75N98026Q01086.pdf

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

15. DATE OF QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

b. TELEPHONE

AREA CODE

NUMBER

STANDARD FORM 18 (REV. 6/1995)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

8. TO:

b. COMPANYa. NAME

c. STREET ADDRESS

d. CITY e. STATE f. ZIP CODE

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

d. STATE e. ZIP CODE

7. DELIVERY

FOB DESTINATION

OTHER

(See Schedule)

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NUMBER

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

PAGE OF PAGES

1. REQUEST NUMBER 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NUMBER 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY 6. DELIVER BY (Date)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

c. CITY

5b. FOR INFORMATION CALL (NO COLLECT CALLS)

National Institutes of Health OD - Office of Logistics and Acquisition Operations 6100 Executive Blvd., Room 6B05 Bethesda, MD 20892-7511

75N98026Q01086

JADDUA JOHNSTON

+10

000-000000

08/26/2026

08/31/2026 0900 ED

Multiple

The purpose of this COMPETITIVE COMBINED

SYNOPSIS / SOLICITATION is to acquire

Preventative Maintenance for three FLIPR high-throughput cell-based assay systems

Period of Performance: 09/07/2026 to

09/06/2027

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address:

Continued...

1 9

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES

NAME OF OFFEROR OR CONTRACTOR

SUPPLIES/SERVICES

(B)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

OPTIONAL FORM 336 (4-86)

Sponsored by GSA FAR (48 CFR) 53.110

ITEM NO.

(A)

QUANTITY

(C)

NSN 7540-01-152-8067

75N98026Q01086

HTTPS://ACQUISITION.GOV/FAR

The following FAR clauses and Provisions are applicable to this award.

FAR 52.204-13 System for Award Management

Maintenance (Oct 2018);

FAR 52.204-18 Commercial and Government Entity

Code Maintenance (Aug 2020);

HHSAR 352.222-70, Contractor Cooperation in

Equal Employment Opportunity Investigations

(Dec 2015).

FAR 52.212-4 Contract Terms and Conditions -In addition to all the applicable commercial

Products and Commercial Services (Nov 2023)

FAR 52.212-5 Contract Terms and Conditions

Required to Implement Statutes or Executive

Orders/Commercial Products and Commercial

Services (Jan 2025)

FAR 52.217-8 Option to Extend Services (Nov

1999)

FAR 52.252-2 CLAUSES INCORPORATED BY REFERENCE

Award enclosure:

Quote

Statement of Work

IPP Invoicing and Payment Provisions

To avoid delay in payment, all invoices must be uploaded into the invoicing processing platform

(IPP) (https://www.ipp.gov). The invoice must match the line item description on the purchase order. It must also state that payment is to be made using a three-way match.

You are reminded that only the contracting officer of record can make any changes to this award any changes made at the direction of the program without an executed modification and null and void and are done at the contractor's own risk.

COMBINED SYNOPSIS / SOLICITATION (COMPETITIVE)

Title: Preventative Maintenance for three FLIPR high-throughput cell-based assay systems used by biologists across NCATS Division of Preclinical Innovation (DPI)

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes only solicitation; proposals are being requested, and a separate written solicitation will not be issued.

(ii) The solicitation number is 75N98026Q01086. This solicitation is issued as a competitive combined synopsis/solicitation for commercial products or commercial services. The Government intends to award a contract or purchase order resulting from this solicitation using full and open competition.

This acquisition is conducted under the authority of FAR 12.603, Streamlined Solicitation for Commercial Products or Commercial Services, and is not expected to exceed the simplified acquisition threshold (if applicable).

The National Institutes of Health (NIH), Office of the Director, Office of Acquisitions, seeks to award a (Firm-Fixed-Price) to the offeror responsible whose proposal represents the best value to the Government.

(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular effective August 11, 2026

(iv) The associated NAICS code is 811210 - Electronic and Precision Equipment Repair and Maintenance and the small business size standard is $34 Million.

This requirement is unrestricted.

(v) Description of Requirement:

Period of Performance:

One year performance period to begin upon award receipt.

SCOPE OF WORK

General Requirements:

Independently and not as an agent of the Government, the Contractor shall furnish all the necessary services, qualified personnel, material, equipment, and facilities, not otherwise provided by the Government as needed to perform the Statement of Work below:

1. FLIPR Tetra SN FT0521 (B1 ETB)

2. FLIPR Tetra SN FT0528 (Big Robot)

3. FLIPR Penta SN FP1050 (TDB)

Specific Requirements:

• General instrument inspection o Check overall instrument condition o Inspect cables, connections, moving parts, and system components for wear or damage

• Optical system check o Inspect and clean accessible optical components o Verify detector/imaging performance o Confirm signal consistency and optical alignment/performance

• Fluidics / dispensing system maintenance o Inspect dispense head, tubing, syringes/pumps, and fluid paths o Check for leaks, blockages, or wear o Verify dispense accuracy and uniformity o Clean and/or replace routine wear components as applicable

• Motion / mechanical checks o Verify plate stage movement and alignment o Check mechanical operation of moving assemblies o Confirm proper positioning and timing functions

• Calibration and performance verification o Run manufacturer-recommended diagnostics o Verify system operation against expected specifications o Confirm assay-read readiness for real-time kinetic measurements

• Software / system review o Check instrument communication with control software o Review system errors or fault logs if applicable o Apply approved software or firmware updates when included and appropriate

• Operational testing o Perform test runs to confirm the instrument is functioning properly after service o Document service findings and performance status

• Service documentation o Provide a PM service report o Note any issues requiring repair, replacement parts, or follow-up service

LEVEL OF EFFORT:

Only technically qualified factory-trained field service engineers shall perform PM and or repiars to the Molecular Devices FLIPR.

GOVERNMENT RESPONSIBILITIES

NCATS will coordinate with vendor in regards to scheduling preventative maintenance visit, and provide access to the facility and the units being serviced.

DELIVERY OR DELIVERABLES

Vendor will provide documentation that outlines the performance attributes of the FLIPRs.

REPORTING REQUIREMENTS

The field service engineer will email the deliverables to project officer.

OTHER CONSIDERATIONS

Travel:

The government is not responsible for travel.

Key Personnel:

Only an manufacturer’s service engineer will be allowed to perform maintenance and repair.

(vi) Delivery Location:

NIH/NCATS-9800 Medical Center Drive Building B, Rockville, MD

(viii) FAR 52.204-7, System for Award Management, applies to this acquisition.

(ix) The provision at FAR 52.212-1, Instructions to Offerors—Commercial Items, applies to this acquisition. Add any agency-specific instructions as required.

(x) The provision at FAR 52.212-2, Evaluation—Commercial Items, applies to this acquisition.

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation represents the best value to the Government, price and other factors considered.

(b) Evaluation Factors:

• Price

• Technical capability

• Warranty

• Delivery schedule

(c) A written notice of award or acceptance of an offer, issued within the time specified in the offer, shall result in a binding contract without further action by either party. The Government reserves the right to accept any offer before the expiration date.

(xi) FAR 52.212-4, Contract Terms and Conditions—Commercial Items, applies to this acquisition.

(xii) Additional contract requirements or terms and conditions, as determined necessary by the Contracting Officer and consistent with customary commercial practices: None

(xiii) The Defense Priorities and Allocations System (DPAS) is not applicable.

(xiv) Submission Requirements:

Responses must include sufficient information to demonstrate the offeror’s capability to provide the required product or service. Quotes shall include, at a minimum:

• Unit and total price

• Shipping and handling costs

• Delivery timeframe after award

• Delivery terms

• F.O.B. point (destination or origin)

• Product or catalog numbers (if applicable)

• Product/service description

Additional evaluation considerations may include past performance, warranty, lifecycle cost, maintenance availability, and environmental or energy efficiency.

Responses must include the Unique Entity Identifier (UEI), Taxpayer Identification Number (TIN), and business size certification. All offerors must be actively registered in the System for Award Management (SAM) at www.sam.gov.

All responses must be received by August 31, 9:00AM EST and must reference solicitation number 75N98026Q01086. Responses may be submitted electronically to Jaddua.Johnston@nih.gov

(xv) Point of Contact: Jaddua Johnston Contracting Specialist, Phone Number: 240-569-0006

Email: Jaddua.Johnston@nih.gov mailto:Jaddua.Johnston@nih.gov

Version 11-30-2016-1 FAR Part 11—Describing Agency Needs

STATEMENT OF WORK (SERVICES)

(SOW)

GENERAL INFORMATION

Title of Project:

Preventative Maintenance for three FLIPR high-throughput cell-based assay systems used by biologists across NCATS Division of Preclinical Innovation (DPI)

Statement of Need and Purpose:

The Molecular Devices Fluorometric Imaging Plate Reader (FLIPR) Tetra+ and Penta systems are high-throughput cell-based assay instruments used in drug discovery and cell signaling research at NCATS DPI.

Reliable operation and consistent performance of these systems are essential to ensure uninterrupted research. To maintain instrument reliability and accuracy, NCATS requires preventative maintenance and performance verification.

Background Information and Objective:

FLIPRs measure fluorescence changes in cells, reading entire microplates at once while adding compounds during reads to capture quick kinetic responses. In DPI Biology, the FLIPRs are essential tools in validating targets, testing candidate compounds, comparing potency and efficacy, all of which help us decide which compounds should advance to more complex studies.

Period of Performance:

One year performance period to begin upon award receipt.

SCOPE OF WORK

General Requirements:

Independently and not as an agent of the Government, the Contractor shall furnish all the necessary services, qualified personnel, material, equipment, and facilities, not otherwise provided by the Government as needed to perform the Statement of Work below:

1. FLIPR Tetra SN FT0521 (B1 ETB)

2. FLIPR Tetra SN FT0528 (Big Robot)

3. FLIPR Penta SN FP1050 (TDB)

Specific Requirements:

• General instrument inspection o Check overall instrument condition o Inspect cables, connections, moving parts, and system components for wear or damage

• Optical system check o Inspect and clean accessible optical components o Verify detector/imaging performance o Confirm signal consistency and optical alignment/performance

• Fluidics / dispensing system maintenance o Inspect dispense head, tubing, syringes/pumps, and fluid paths o Check for leaks, blockages, or wear o Verify dispense accuracy and uniformity o Clean and/or replace routine wear components as applicable

• Motion / mechanical checks o Verify plate stage movement and alignment o Check mechanical operation of moving assemblies o Confirm proper positioning and timing functions

• Calibration and performance verification o Run manufacturer-recommended diagnostics o Verify system operation against expected specifications o Confirm assay-read readiness for real-time kinetic measurements

• Software / system review o Check instrument communication with control software o Review system errors or fault logs if applicable o Apply approved software or firmware updates when included and appropriate

• Operational testing o Perform test runs to confirm the instrument is functioning properly after service o Document service findings and performance status

• Service documentation o Provide a PM service report o Note any issues requiring repair, replacement parts, or follow-up service

LEVEL OF EFFORT:

Only technically qualified factory-trained field service engineers shall perform PM and or repiars to the Molecular Devices FLIPR.

GOVERNMENT RESPONSIBILITIES

NCATS will coordinate with vendor in regards to scheduling preventative maintenance visit, and provide access to the facility and the units being serviced.

DELIVERY OR DELIVERABLES

Vendor will provide documentation that outlines the performance attributes of the FLIPRs.

REPORTING REQUIREMENTS

The field service engineer will email the deliverables to project officer.

OTHER CONSIDERATIONS

Travel:

The government is not responsible for travel.

Key Personnel:

Only an manufactuer’s service engineer will be allowed to perform maintenance and repair.

Information System Security Plan:

N/A

Data Rights:

Section 508—Electronic and Information Technology Standards:

Publications and Publicity:

Confidentiality of Information:

Title