Sol_75H71026Q00106.pdf

PDF 540 KB Posted

Attached to
Digital Master Controller PLC Replacement and Recommissioning - KHC
Solicitation number
IHS1523255
Issued by

About this file

This is a Solicitation/Contract/Order for Commercial Items (Standard Form 1449) issued by Kayenta Health Center's Acquisition Department for the replacement and recommissioning of a Digital Master Controller (DMC) Programmable Logic Controller (PLC) system at their Kayenta, Arizona healthcare facility.

The contract requires the contractor to provide all labor, materials, equipment, tools, supervision, and transportation necessary to replace the existing faulty CUMMINS Master Controller 480V (model A140624196) and restore full operational functionality to the DMC system. Key scope elements include: coordinating project scheduling; performing pre-installation site walk-downs; safely de-energizing the system using lockout/tagout procedures; removing the faulty PLC; installing a new OEM-approved replacement; providing all required firmware, software, programming tools, and licenses; configuring HMI/PLC communications; performing point-to-point I/O verification; and conducting comprehensive functional testing including alarm verification and communication loss/recovery testing. The contract specifies a period of performance from the award date through July 31, 2026, with the offer due date of April 6, 2026 at 12:00 PM ET. The solicitation number is 75H71026Q00106 (requisition IHS1523255). Evaluation criteria include technical capability with prior experience, price reasonableness and alignment with scope, and warranty terms. The contractor must be qualified in generator control systems and PLC programming with demonstrated OEM-supported platform experience. Deliverables include PLC configuration files in native OEM format, a commissioning and functional test report documenting procedures and results, and updated system documentation. The contract incorporates FAR clauses for commercial items, Buy American requirements, small business protections, labor standards, and payment through electronic funds transfer via the Department of Treasury Invoice Processing Platform.

View the file

Other files

File Type Posted
Tab 3 - SOW DMC PLC REPLACEMNET.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

Highway 160, Mile Post 394.3 PO Box 368 Acquisition Department Kayenta Health Center

CODE 16. ADMINISTERED BYCODE

X

X

238210

SIZE STANDARD:

% FOR:SET ASIDE:UNRESTRICTED OR25

RFPIFB

10. THIS ACQUISITION ISCODE

RFQ

14. METHOD OF SOLICITATION

13b. RATING

NAICS:

SMALL BUSINESS

04/06/2026 1200 ET

03/27/2026

BRANDON MARTINEZ

(No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBER a. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

75H71026Q00106

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 21 IHS1523255OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

Kayenta AZ 86033

TELEPHONE NO.

17a. CONTRACTOR/

Kayenta AZ 86033 Highway 160 Mile Post 394.3 Kayenta Health Center

15. DELIVER TO

Kayenta AZ 86033 Highway 160, Mile Post 394.3 PO Box 368 Acquisition Department

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

$19

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

11.

SEE SCHEDULEX

12. DISCOUNT TERMS

THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

8(A)

Kayenta Health Center

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

This contract is subject to the electronic payment process by the Department of Treasury.

All invoices complying to the requirements at 52.212-4(g) must be submitted through www.ipp.gov. For additional information, refer to the incorporated clause at 352.232-71 Electronic Submission of Payment Requests (FEB 2022).

If the Government's and Contractor's terms and conditions are in conflict, the Government's terms and conditions shall prevail.

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

XX

DATED

JERLYN R. BEGAY

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Govt. Use Only)

OFFER

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT:

REF.

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 2/2012) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

Period of Performance: 04/17/2026 to 07/31/2026

1 Contractor shall provide the requested CUMMINS

Master Controller 480V - A140624196 and recommissioning in accordance with Attachment A -

Statement of Work for the Kayenta Health Center

Facilities Department.

Contractor Mileage Charge

Period of Performance: 04/01/2026 to 07/31/2026

2 Cummins Master Controller 480V - A140624196

Period of Performance: 04/01/2026 to 07/31/2026

3 Freight Shipping

Period of Performance: 04/01/2026 to 07/31/2026

4 Other Supply Cost

Continued ...

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

21 2 of

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 21

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

75H71026Q00106

Period of Performance: 04/01/2026 to 07/31/2026

5 Labor to replace Cummins Master Controller

Period of Performance: 04/01/2026 to 07/31/2026

6 Tax

Period of Performance: 04/01/2026 to 07/31/2026

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

Rev. 11/30/2025

SECTION B – CONTINUATION OF SF-1449

This page has been left blank intentionally

SECTION C – CONTRACT CLAUSES

52.212-4 CONTRACT TERMS AND CONDITIONS –

COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES

NOV 2025

(DEVIATION)

The following Federal Acquisition Regulation clauses also apply:

☐ 52.203-3 GRATUITIES APR 1984

☐ 52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT Alt I

NOV 2021

☐ 52.203-12 LIMITATION OF PAYMENTS TO INFLUENCE CERTAIN FEDERAL

TRANSACTIONS

JUN 2020

☐ 52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT NOV 2021

☐ 52.203-16 PREVENTING PERSONAL CONFLICTS OF INTEREST JUN 2020

☒ 52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS NOV 2023

☒ 52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS

JAN 2017

☐ 52.204-9 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL JAN 2011

☒ 52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE NOV 2025

(DEVIATION)

☐ 52.204-14 SERVICE CONTRACT REPORTING REQUIREMENTS NOV 2025

(DEVIATION)

☐ 52.204-15 SERVICE CONTRACT REPORTING REQUIREMENTS FOR INDEFINITE-

DELIVERY CONTRACTS

NOV 2025

(DEVIATION)

☐ 52.204-91 CONTRACTOR IDENTIFICATION NOV 2025

(DEVIATION)

☐ 52.209-6 PROTECTING THE GOVERNMENT’S INTEREST WHEN

SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR

PROPOSED FOR DEBARMENT

NOV 2025

(DEVIATION)

☐ 52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING

RESPONSIBILITY MATTERS

NOV 2025

(DEVIATION)

☒ 52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC

CORPORATIONS

NOV 2025

(DEVIATION)

☐ 52.213-1 RESERVED

☐ 52.219-3 NOTICE OF HUBZONE SET-ASIDE OR SOLE-SOURCE AWARD NOV 2025

(DEVIATION)

☐ 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE NOV 2025

(DEVIATION)

☐ 52.219-6 Alt I

NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE, WITH ALTERNATE I NOV 2025

(DEVIATION)

☐ 52.219-7 NOTICE OF PARTIAL SMALL BUSINESS SET-ASIDE NOV 2020

☐ 52.219-7 Alt I

NOTICE OF PARTIAL SMALL BUSINESS SET-ASIDE, WITH ALTERNATE I MAR 2020

☐ 52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS NOV 2025

(DEVIATION)

☐ 52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN NOV 2025

(DEVIATION)

☐ 52.219-9 Alt I

SMALL BUSINESS SUBCONTRACTING PLAN, WITH ALTERNATE I NOV 2025

(DEVIATION)

☐ 52.219-9 Alt II

SMALL BUSINESS SUBCONTRACTING PLAN, WITH ALTERNATE II NOV 2025

(DEVIATION)

☐ 52.219-9 Alt III

SMALL BUSINESS SUBCONTRACTING PLAN, WITH ALTERNATE III NOV 2025

(DEVIATION)

☐ 52.219-9 Alt IV

SMALL BUSINESS SUBCONTRACTING PLAN, WITH ALTERNATE IV NOV 2025

(DEVIATION)

☐ 52.219-13 NOTICE OF SET-ASIDE OF ORDERS MAR 2020

☐ 52.219-13 Alt I

RESERVED

☐ 52.219-16 LIQUIDATED DAMAGES—SUBCONTRACTING PLAN NOV 2025

(DEVIATION)

☐ 52.219-27 NOTICE OF SET-ASIDE FOR, OR SOLE-SOURCE AWARD TO, SERVICE-

DISABLED VETERAN-OWNED SMALL BUSINESS (SDVOSB) CONCERNS

ELIGIBLE UNDER THE SDVOSB PROGRAM

NOV 2025

(DEVIATION)

☒ 52.219-28 POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION NOV 2025

(DEVIATION)

☐ 52.219-28 Alt I

POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION, WITH

ALTERNATE I

NOV 2025

(DEVIATION)

☐ 52.219-29 NOTICE OF SET-ASIDE FOR, OR SOLE-SOURCE AWARD TO,

ECONOMICALLY DISADVANTAGED WOMEN-OWNED SMALL BUSINESS

CONCERNS

NOV 2025

(DEVIATION)

☐ 52.219-30 NOTICE OF SET-ASIDE FOR, OR SOLE-SOURCE AWARD TO, WOMEN-

OWNED SMALL BUSINESS CONCERNS ELIGIBLE UNDER THE WOMEN-

OWNED SMALL BUSINESS PROGRAM

NOV 2025

(DEVIATION)

☐ 52.219-32 ORDERS ISSUED DIRECTLY UNDER SMALL BUSINESS RESERVES MAR 2020

☐ 52.219-33 NONMANUFACTURER RULE NOV 2025

(DEVIATION)

☒ 52.222-3 CONVICT LABOR NOV 2025

(DEVIATION)

☒ 52.222-19 CHILD LABOR—COOPERATION WITH AUTHORITIES AND REMEDIES NOV 2025

(DEVIATION)

☐ 52.222-35 EQUAL OPPORTUNITY FOR VETERANS NOV 2025

(DEVIATION)

☒ 52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES NOV 2025

(DEVIATION)

☐ 52.222-36

ALT I

EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES, WITH

ALTERNATE I

JUL 2014

☐ 52.222-37 EMPLOYMENT REPORTS ON VETERANS NOV 2025

☐ 52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR

RELATIONS ACT

NOV 2025

(DEVIATION)

☐ 52.222-41 SERVICE CONTRACT LABOR STANDARDS NOV 2025

(DEVIATION)

☐ 52.222-43 FAIR LABOR STANDARDS ACT AND SERVICE CONTRACT LABOR

STANDARDS-PRICE ADJUSTMENT (MULTIPLE YEAR AND OPTION

CONTRACTS)

NOV 2025

(DEVIATION)

☐ 52.222-44 FAIR LABOR STANDARDS ACT AND SERVICE CONTRACT LABOR

STANDARDS-PRICE ADJUSTMENT

NOV 2025

(DEVIATION)

☒ 52.222-50 COMBATING TRAFFICKING IN PERSONS NOV 2025

(DEVIATION)

☐ 52.222-50 Alt I

COMBATING TRAFFICKING IN PERSONS NOV 2025

(DEVIATION)

☐ 52.222-51 EXEMPTION FROM APPLICATION OF THE SERVICE CONTRACT LABOR

STANDARDS TO CONTRACTS FOR MAINTENANCE, CALIBRATION, OR

REPAIR OF CERTAIN EQUIPMENT—REQUIREMENTS

NOV 2025

(DEVIATION)

☐ 52.222-53 EXEMPTION FROM APPLICATION OF THE SERVICE CONTRACT LABOR

STANDARDS TO CONTRACTS FOR CERTAIN SERVICES—

REQUIREMENTS

NOV 2025

(DEVIATION)

☐ 52.222-54 EMPLOYMENT ELIGIBILITY VERIFICATION NOV 2025

(DEVIATION)

☐ 52.222-55 MINIMUM WAGES FOR CONTRACTOR WORKERS UNDER EXECUTIVE

ORDER 14026

NOV 2025

(DEVIATION)

☐ 52.222-62 PAID SICK LEAVE UNDER EXECUTIVE ORDER 13706 NOV 2025

(DEVIATION)

☐ 52.223-2 REPORTING OF BIOBASED PRODUCTS UNDER SERVICE AND

CONSTRUCTION CONTRACTS

NOV 2025

(DEVIATION)

☒ 52.223-5 POLLUTION PREVENTION AND RIGHT-TO-KNOW INFORMATION MAY 2024

☐ 52.223-11 OZONE-DEPLETING SUBSTANCES NOV 2025

(DEVIATION)

☐ 52.223-12 MAINTENANCE, SERVICE, REPAIR, OR DISPOSAL OF REFRIGERATION

EQUIPMENT AND AIR CONDITIONERS

NOV 2025

(DEVIATION)

☒ 52.223-23 SUSTAINABLE PRODUCTS NOV 2025

(DEVIATION)

☐ 52.224-1 PRIVACY ACT NOTIFICATION APR 1984

☐ 52.224-2 PRIVACY ACT APR 1984

☐ 52.224-3 PRIVACY TRAINING JAN 2017

☐ 52.224-3

ALT I

PRIVACY TRAINING, ITH ALTERNATE I JAN 2017

☒ 52.225-1 BUY AMERICAN-SUPPLIES NOV 2025

(DEVIATION)

☐ 52.225-1 Alt I

BUY AMERICAN-SUPPLIES, WITH ALTERNATE I OCT 2022

☐ 52.225-3 BUY AMERICAN-FREE TRADE AGREEMENTS-ISRAELI TRADE ACT NOV 2025

52.225-3

ALT I

RESERVED

☐ 52.225-3 Alt II

BUY AMERICAN-FREE TRADE AGREEMENTS-ISRAELI TRADE ACT,

WITH ALTERNATE II

NOV 2025

(DEVIATION)

☐ 52.225-3 Alt III

BUY AMERICAN-FREE TRADE AGREEMENTS-ISRAELI TRADE ACT,

WITH ALTERNATE III

NOV 2025

(DEVIATION)

☐ 52.225-3 Alt IV

BUY AMERICAN-FREE TRADE AGREEMENTS-ISRAELI TRADE ACT,

WITH ALTERNATE IV

NOV 2025

(DEVIATION)

☐ 52.225-5 TRADE AGREEMENTS NOV 2023

☐ 52.225-14 INCONSISTENCY BETWEEN ENGLISH VERSION AND TRANSLATION OF

CONTRACT

FEB 2000

☐ 52.225-19 CONTRACTOR PERSONNEL IN A DESIGNATED OPERATIONAL AREA OR

SUPPORTING A DIPLOMATIC OR CONSULAR MISSION OUTSIDE THE

UNITED STATES

MAY 2020

☐ 52.225-26 CONTRACTORS PERFORMING PRIVATE SECURITY FUNCTIONS

OUTSIDE THE UNITED STATES

OCT 2016

☐ 52.226-1 UTILIZATION OF INDIAN ORGANIZATIONS AND INDIAN-OWNED

ECONOMIC ENTERPRISES

NOV 2025

(DEVIATION)

☐ 52.226-5 RESTRICTIONS ON SUBCONTRACTING OUTSIDE DISASTER OR

EMERGENCY AREA

NOV 2025

(DEVIATION)

☐ 52.226-6 PROMOTING EXCESS FOOD DONATION TO NONPROFIT

ORGANIZATIONS

NOV 2025

(DEVIATION)

☒ 52.226-8 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING

WHILE DRIVING

MAY 2024

☐ 52.229-12 TAX ON CERTAIN FOREIGN PROCUREMENTS AUG 2025

(DEVIATION)

☐ 52.232-18 AVAILABILITY OF FUNDS APR 1984

☐ 52.232-29 TERMS FOR FINANCING OF COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES

NOV 2021

☐ 52.232-30 INSTALLMENT PAYMENTS OF COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES

NOV 2021

☒ 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER—SYSTEM FOR AWARD

MANAGEMENT

OCT 2018

☐ 52.232-34 PAYMENT BY ELECTRONIC FUNDS TRANSFER—OTHER THAN SYSTEM

FOR AWARD MANAGEMENT

JUL 2013

☐ 52.232-36 PAYMENT BY THIRD PARTY NOV 2025

(DEVIATION)

☒ 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS

SUBCONTRACTORS

MAR 2023

☐ 52.232-90 FAST PAYMENT PROCEDURE NOV 2025

(DEVIATION)

☒ 52.233-3 PROTEST AFTER AWARD NOV 2025

(DEVIATION)

☒ 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM NOV 2025

(DEVIATION)

☒ 52.237-2 PROTECTION OF GOVERNMENT BUILDING, EQUIPMENT, AND

VEGETATION

APR 1984

☒ 52.237-3 CONTINUITY OF SERVICES JAN 1991

☒ 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS NOV 2025

(DEVIATION)

☐ 52.240-91 Alt I

SECURITY PROHIBITIONS AND EXCLUSIONS, WITH ALTERNATE I NOV 2025

(DEVIATION)

☐ 52.240-92 SECURITY REQUIREMENTS NOV 2025

(DEVIATION)

☐ 52.240-92 Alt II

SECURITY REQUIREMENTS WITH ALTERNATE II NOV 2025

(DEVIATION)

☐ 52.240-93 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION

SYSTEMS

NOV 2025

(DEVIATION)

☐ 52.242-5 PAYMENTS TO SMAL BUSINESS SUBCONTRACTORS JAN 2017

☐ 52.242-13 BANKRUPTCY JUL 1995

☐ 52.244-2 SUBCONTRACTS JUN 2020

☒ 52.244-6 SUBCONTRACTS FOR COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES

NOV 2025

(DEVIATION)

☐ 52.245-1 GOVERNMENT PROPERTY SEP 2021

☒ 52.245-2 GOVERNMENT PROPERTY INSTALLATION OPERATION SERVICES APR 2012

☐ 52.245-9 USE AND CHARGES APR 2012

☐ 52.247-64 PREFERENCE FOR PRIVATELY OWNED U.S.-FLAG COMMERCIAL

VESSELS

NOV 2025

(DEVIATION)

☐ 52.247-64 Alt I

PREFERENCE FOR PRIVATELY OWNED U.S.-FLAG COMMERCIAL

VESSELS, WITH ALTERNATE I

APR 2003

☐ 52.247-64 Alt II

PREFERENCE FOR PRIVATELY OWNED U.S.-FLAG COMMERCIAL

VESSELS, WITH ALTERNATE II

NOV 2021

52.252-2 CLAUSES INCORPORATED BY REFERENCE FEB 1998

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Revolutionary FAR Overhaul - FAR Overhaul - FAR Part Deviation Guidance | Acquisition.GOV

Federal Acquisition Regulation - https://www.acquisition.gov/browse/index/far

Department of Health and Human Services Acquisition Regulation – https://www.acquisition.gov/hhsar

(End of clause)

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES NOV 2020

(a)The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b)The use in this solicitation or contract of any Department of Health and Human Services (48 CFR Chapter 3) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

The following Department of Health and Human Services Acquisition Regulation clauses also apply:

☐ 352.203-70 ANTI-LOBBYING DEC 2015

☐ 352.208-70 PRINTING AND DUPLICATION DEC 2015

☐ 352.211-3 PAPERWORK REDUCTION ACT DEC 2015

☐ 352.219-71 MENTOR-PROTÉGÉ PROGRAM REPORTING REQUIREMENTS JAN 2010

☐ 352.223-70 SAFETY AND HEALTH DEC 2015

☐ 352.224-70 PRIVACY ACT DEC 2015

☐ 352.226-6 INDIAN ECONOMIC ENTERPRISE SUBCONTRACTING

LIMITATIONS

MAR 2022

☐ 352.227-70 PUBLICATIONS AND PUBLICITY DEC 2015

☐ 352.231-70 SALARY RATE LIMITATION DEC 2015

☐ 352.237-70 PRO-CHILDREN ACT DEC 2015

☐ 352.237-71 CRIME CONTROL ACT – REPORTING OF CHILD ABUSE DEC 2015

☐ 352.237-72 CRIME CONTROL ACT – REQUIREMENTS FOR BACKGROUND

CHECKS

DEC 2015

☐ 352.237-73 INDIAN CHILD PROTECTION AND FAMILY VIOLENCE ACT DEC 2015

352.232-71 ELECTRONIC SUBMISSION OF PAYMENT

REQUESTS

FEB 2022

(a) Definitions. As used in this clause –

Payment request means a bill, voucher, invoice, or request for contract financing payment with associated supporting documentation. The payment request must comply with the requirements identified in FAR 32.905(b), “Content of Invoices” and the applicable Payment clause included in this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests electronically using the Department of Treasury Invoice Processing Platform (IPP) or successor system. Information regarding IPP, including IPP Customer Support contact information, is available at www.ipp.gov or any successor site.

(c) The Contractor may submit payment requests using other than IPP only when the Contracting Officer authorizes alternate procedures in writing in accordance with HHS procedures.

(d) If alternate payment procedures are authorized, the Contractor shall include a copy of the Contracting Officer’s written authorization with each payment request.

(End of Clause)

The following local Indian Health Service, Navajo Area terms also apply:

NAIHS-ACQ-09 UNAUTHORIZED COMMITMENTS NOV 2025

(a) Definitions.

Contracting Officer means a person with the authority to enter into, administer, and/or terminate contracts and make related determination and findings.

Ratification means the act of approving an unauthorized commitment by an official who has the authority to do so.

Unauthorized Commitment (UAC) means an agreement that is not binding solely because the Government representative who made it lacked the authority to enter into that agreement on behalf of the Government.

(b) Policy.

The Government is not bound by agreements with, or contractual commitments made to, prospective contractors by individuals who do not have delegated contracting authority. Unauthorized commitments do not follow the appropriate process for the expenditure of Government funds. Consequently, the Government may not be able to ratify certain actions, putting a contractor at risk for taking direction from a Federal official other than the contracting officer (see FAR 1.403-2) Government employees responsible for unauthorized commitments are subject to disciplinary action. Contractors perform at their own risk when accepting direction from unauthorized officials. Failure to follow statutory and regulatory processes for the expenditure of Government funds is a very serious matter.

(c) Procedure.

Any agreement, modification, or change to a contractual agreement made by a government personnel who lack authority will be deemed an unauthorized commitment. The Government is not liable to the Contractor or under the terms of the contract, financially or otherwise – unless the unauthorized commitment successfully passes the ratification process.

The ratification process does not have any lead time, nor does the Government make any promise that an unauthorized commitment will be ratified and, therefore, the Contractor would be paid. The Contractor proceeds at its own risk if any of the terms of the contract are altered, changed, or modified without the written concurrence by a Contracting Officer.

(End of Clause)

SECTION D – DOCUMENTS, EXHIBITS, ATTACHMENTS, ETC.

Attachment A – Statement of Work

STATEMENT OF WORK

TO: DMC PLC REPLACEMENT AND RECOMMISSIONING

AT: KAYENTA HEALTH CARE CENTER KAYENTA, ARIZONA

DATE: DECEMBER 30, 2025

PERIOD OF PERFORMANCE: AWARD DATE – JULY 31, 2026

Attachment A - Statement of Work

INTRODUCTION

Kayenta Health Care Center (KHC) operates critical power generation and control systems necessary to support continuous healthcare operations. The Digital Master Controller (DMC) system is a critical component used to monitor and control generator operations. The DMC system is currently experiencing an HMI/PLC Communication Failure, resulting in loss of reliable system monitoring and control. This Statement of Work (SOW) defines the requirements for replacement of the existing PLC and recommissioning of the DMC system to restore full operational functionality.

BACKGROUND

Kayenta Health Care Center provides comprehensive inpatient, outpatient, and emergency healthcare services. Reliable power generation and control systems are essential to patient safety and facility operations. The existing DMC PLC has experienced a system fault that cannot be resolved through troubleshooting alone and requires replacement. The work described herein shall be performed by qualified technicians experienced in generator control systems and OEM-supported PLC platforms.

OBJECTIVE

The objective of this project is to replace the existing DMC PLC, restore HMI/PLC communications, and return the DMC system to normal, reliable operation in accordance with manufacturer and facility requirements. Successful completion shall be based on documented functional testing and COR acceptance as defined herein.

PERFORMANCE DESCRIPTION

The Contractor shall furnish all labor, materials, equipment, tools, supervision, transportation, and coordination necessary to replace the DMC PLC and recommission the system. All work shall be coordinated with Facility representatives and OEM support (Cummins or approved equivalent) to ensure proper programming, validation, and operational integrity of the DMC system. Work shall be performed in a manner that minimizes impact to facility operations and maintains system safety.

SCOPE OF WORK

1. Coordinate project scheduling with the Facility Representative and OEM support.

2. Perform a pre-installation site walk-down and review existing DMC drawings and documentation.

3. Safely de-energize and place the DMC system in a controlled condition prior to work in accordance with approved lockout/tagout procedures.

4. Remove the existing faulty PLC and associated components as required.

5. Provide and install a new OEM-approved PLC compatible with the existing DMC system.

6. Verify proper power supply, grounding, and I/O terminations.

7. Provide all OEM-required firmware, software, programming tools, and licenses necessary to complete PLC programming and commissioning. No OEM software or licenses shall be assumed to be Government-furnished unless explicitly stated.

8. Load OEM-approved firmware and application programming.

9. Configure communication parameters to restore HMI/PLC communications.

10. Integrate the PLC with existing HMIs, alarms, sensors, and field devices.

11. Perform point-to-point I/O verification.

12. Conduct functional testing and system commissioning, including alarm verification and communication loss/recovery testing.

13. Coordinate all required system outages with the Facility Representative a minimum of 10 business days in advance. No outages impacting critical power systems shall occur without written Government approval.

14. Verify alarm functionality and confirm resolution of all communication faults.

COMPLIANCE REQUIREMENTS

All work shall comply with the following, as applicable:

• Manufacturer/OEM requirements (Cummins DMC systems)

• NFPA 70 (National Electrical Code)

• NFPA 110 – Emergency and Standby Power Systems

• OSHA 29 CFR 1910 – General Industry Standards

• Facility safety, infection control, and access requirements

CONTRACTOR QUALIFICATIONS

All work shall be performed by qualified technicians experienced in generator control systems and PLC programming. The Contractor shall have demonstrated experience with OEM-supported generator control platforms and power system commissioning.

SUBMITTAL REVIEW AND APPROVAL

The Contractor shall submit the following for review and approval prior to installation:

1. PLC equipment cut sheets and specifications.

2. Programming and configuration approach.

3. Project schedule.

REPORTING AND DOCUMENTATION

The Contractor shall provide the following deliverables:

1. PLC configuration, source code, and backup files in native OEM format on Government-approved electronic media.

2. Commissioning and functional test report documenting test procedures, results, deficiencies, and corrective actions.

3. Updated system documentation and drawings reflecting final installation, as applicable.

TESTING AND COMMISSIONING

Final testing and commissioning shall be conducted in coordination with the Facility Representative/COR.

Acceptance shall be based on successful completion of documented functional testing witnessed by the COR, verification of restored HMI/PLC communications, alarm functionality, and fault-free operation under normal conditions for a minimum continuous run period of 2 hours. Final testing and commissioning shall be conducted in coordination with the Facility Representative/COR to verify proper system operation, restored communications, and alarm functionality prior to acceptance.

QUALITY CONTROL AND SAFETY

The Contractor shall maintain a quality control program to ensure compliance with this SOW. All work shall be performed in accordance with site safety requirements. Lockout/tagout procedures shall be strictly followed.

GENERAL REQUIREMENTS

The Contractor shall provide all tools, equipment, and materials necessary to complete the work. Normal work hours shall be Monday through Friday, 8:00 AM to 5:00 PM, excluding Federal holidays, unless otherwise coordinated and approved.

PROJECT CLOSEOUT

Upon completion, the Contractor shall review system operation with facility personnel and submit all required deliverables prior to final acceptance. Final acceptance shall not occur until all documentation, backups, and test reports have been received and approved by the COR.

PERIOD OF PERFORMANCE

Award Date – JULY 31, 2026

CONTACT INFORMATION

Desmond Jones – Supervisory General Engineer – (928) 697-5192 Vernon Begay – Maintenance Mechanic Supervisor – (928) 697-5194 Kendall Tanner – Maintenance Mechanic Supervisor – (928) 697-5193

WARRANTY

Workmanship Warranty: One (1) year. Equipment Warranty: Per manufacturer’s standard warranty.

The Contractor shall guarantee proper system functionality and restored HMI/PLC communications upon final acceptance.

SECTION E – SOLICITATION PROVISIONS

52.212-1 INSTRUCTIONS TO OFFERORS – COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES

NOV 2025

52.212-2 EVALUATION – COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES

NOV 2025

(DEVIATION)

(a)Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Quotations will be evaluated based on the following order:

1. Technical capability with prior experience: Vendors must demonstrate the ability to perform DMC replacement and recommissioning work. Evaluation will consider relevant past performance, technical qualifications of personnel, and prior experience with similar systems.

2. Price: Pricing will be evaluated for reasonableness, completeness, and alignment with the scope of work. The Government will review whether the offered price reflects a sound understanding of the labor, materials, equipment, and technical complexity associated with DMC replacement and recommissioning tasks.

3. Warranty Terms: Warranty provisions on equipment, parts, and labor will be evaluated for clarity, coverage, and duration. Preference will be given to vendors offering warranties that provide the most comprehensive protection against defects and workmanship issues, ensuring long-term reliability of the newly installed DMC system.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) Notice of award. A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

The following Federal Acquisition Regulations provisions incorporated by reference also apply:

☐ 52.203-11 CERTIFICATION AND DISCLOSURE REGARDING PAYMENTS TO

INFLUENCE CERTAIN FEDERAL TRANSACTIONS

SEP 2024

52.203-18

PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE

CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR

STATEMENTS-REPRESENTATION

JAN 2017

☒ 52.204-7

SYSTEM FOR AWARD MANAGEMENT - REGISTRATION

NOV 2025

(DEVIATION)

☐ 52.204-7 Alt I

SYSTEM FOR AWARD MANAGEMENT—REGISTRATION, WITH

ALTERNATE I

NOV 2025

(DEVIATION)

52.207-6 SOLICITATION OF OFFERS FROM SMALL BUSINESS CONCERNS AND

SMALL BUSINESS TEAMING ARRANGEMENTS OR JOINT VENTURES

(MULTIPLE-AWARD CONTRACTS)

AUG 2024

☐ 52.209-12 CERTIFICATION REGARDING TAX MATTERS OCT 2025

☐ 52.216-31 TIME-AND-MATERIALS/LABOR-HOUR PROPOSAL REQUIREMENTS –

COMMERCIAL ACQUISITION

NOV 2021

☒ 52.219-4 NOTICE OF PRICE EVALUATION PREFERENCE FOR HUBZONE SMALL

BUSINESS CONCERNS

NOV 2025

(DEVIATION)

☐ 52.219-31 NOTICE OF SMALL BUSINESS RESERVE MAR 2020

☐ 52.222-18 CERTIFICATION REGARDING KNOWLEDGE OF CHILD LABOR FOR

LISTED END PRODUCTS

FEB 2021

52.222-48 EXEMPTION FROM APPLICATION OF THE SERVICE CONTRACT LABOR

STANDARDS FOR MAINTENANCE, CALIBRATION, OR REPAIR OF

CERTAIN EQUIPMENT–CERTIFICATION

MAY 2014

☐ 52.222-52 EXEMPTION FROM APPLICATION OF THE SERVICE CONTRACT LABOR

STANDARDS FOR CERTAIN SERVICES-CERTIFICATION

MAY 2014

☐ 52.222-56 CERTIFICATION REGARDING TRAFFICKING IN PERSONS COMPLIANCE

PLAN

OCT 2020

☐ 52.223-1

BIOBASED PRODUCT CERTIFICATION

MAY 2024

☐ 52.223-4

RECOVERED MATERIAL CERTIFICATION

MAY 2008

☐ 52.229-11 TAX ON CERTAIN FOREIGN PROCUREMENTS—NOTICE AND

REPRESENTATION

AUG 2025

(DEVIATION)

☐ 52.237-1

SITE VISIT

APR 1984

☒ 52.240-90 SECURITY PROHIBITIONS AND EXCLUSIONS REPRESENTATIONS AND

CERTIFICATIONS

52.209-2 PROHIBITION ON CONTRACTING WITH

INVERTED DOMESTIC CORPORATIONS –

REPRESENTATION

(a) Definitions. As used in this clause—

Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Subsidiary means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

(b) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-3(b) applies or the requirement is waived in accordance with the procedures at 9.108-5.

(c) Representation. The Offeror represents that-

(1) It □ is, □ is not an inverted domestic corporation; and

(2) It □ is, □ is not a subsidiary of an inverted domestic corporation.

(End of provision)

52.209-11 REPRESENTATION BY CORPORATIONS

REGARDING DELINQUENT TAX LIABILITY OR A

FELONY CONVICTION UNDER ANY FEDERAL

LAW

(a) The Government will not enter into a contract with any corporation that—

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that–

(1) It is □ is not □ a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is □ is not □ a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of provision)

52.225-2 BUY AMERICAN CERTIFICATE OCT 2022

(a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component.

(2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

(4) The terms “commercially available off-the-shelf (COTS) item,” “critical component,” "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies."

(b)Foreign End Products:

Line Item No. Country of Origin Exceeds 55% domestic content (yes/no)

(b)[List as necessary]

(c) Domestic end products containing a critical component:

Line Item No. ___

[List as necessary]

(d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation.

(End of provision)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY

REFERENCE

FEB 1998

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

Revolutionary FAR Overhaul - FAR Overhaul - FAR Part Deviation Guidance | Acquisition.GOV

Federal Acquisition Regulation - https://www.acquisition.gov/browse/index/far

Department of Health and Human Services Acquisition Regulation – https://www.acquisition.gov/hhsar

(End of Provision)

52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS NOV 2020

(a)The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b)The use in this solicitation of any Department of Health and Human Services (48 CFR Chapter 3) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of Provision)

The following Department of Health and Human Services Acquisition Regulation provisions also apply:

☐ 352.219-70 MENTOR-PROTÉGÉ PROGRAM DEC 2015

☐ 352.223-71 INSTRUCTIONS TO OFFERORS – SUSTAINABLE ACQUISITION DEC 2015

☐ 352.225-5 NOTICE OF INDIAN ECONOMIC ENTERPRISE SET ASIDE MAR 2022

☐ 352.226-4 NOTICE OF INDIAN SMALL BUSINESS ECONOMIC ENTERPRISE SET

ASIDE

MAR 2022

☐ 352.226-7 INDIAN ECONOMIC ENTERPRISE REPRESENTATION MAR 2022

☐ 352.239-73 ELECTRONIC AND INFORMATION TECHNOLOGY ACCESSIBILITY

NOTICE

DEC 2015

SOL - 75H71026Q00106 - Digital Controller BC
Tab 3 - SOW DMC PLC REPLACEMNET
SOL - 75H71026Q00106 - Digital Controller E

File details come from the government source that posted it. Updated .