Sign Post Specifications.docx
DOCX document 105 KB Posted
- Attached to
- Galvanized Steel Sign Posts
- Solicitation number
- 80DOT-S531
- Issued by
- Nevada
About this file
This document details the item specifications for 64 mm (2 in.) square sign posts and anchors for a state and local contract opportunity in the state of Nevada, specifically the jurisdictions of Carson City. The sign posts must be made of steel conforming to ASTM A653 or A1011 standards, with a minimum yield strength of either 275 MPa (40,000 psi) or 415 MPa (60,000 psi) after fabrication. The posts must have a square tube shape, be carefully rolled and welded, and have a zinc coating as per ASTM A653 or AASHTO M181 standards. The sign post anchors must also be made of 4.8 mm (3/16 in.) square steel tubing.
The pricing terms, set asides, incumbents, funding details, and other salient information are not provided in the document. However, the document outlines the technical specifications for the required sign posts and anchors, which are to be used in the state and local contract opportunity in Nevada.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 2019-02-07 Standard Terms and Conditions for Commodities.pdf | ||
| Additional Requirements~36.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM SPECIFICATIONS
716.03.05 Sign Hardware and Related Materials. Square sign posts and anchors shall conform to the following requirements:
(a) Material. Steel posts shall conform to ASTM A653 or A1011. Steel posts shall have a minimum yield of 275 MPa (40,000 psi) after fabrication for the steel thicknesses indicated in the plans. Steel posts with a minimum yield of 415 MPa (60,000 psi) after fabrication may be substituted for the sizes and thicknesses shown in the plans according to the following table:
| 275 MPa (40,000 psi) | 415 MPa (60,000 psi) | ||||
| Post Size | Steel Thickness | Steel Thickness | |||
| 64 mm (2 ½”) | 10 gauge | 11 gauge |
(b) Shape. The cross section of the post shall be a square tube formed of steel carefully rolled to size and welded. The sign post anchor used with the 64 mm (2 ½ in.) post shall be a square tube formed of 4.8 mm (3/16 in.) steel carefully rolled to size and welded.
(c) Fabrication. Furnish straight members with a smooth uniform finish. Provide holes and cut off ends which are free from burrs.
(d) Finish. Posts made from material conforming to ASTM A653 shall be formed from steel which has been zinc coated according to ASTM A653, Coating Designation Z275 (G90). Posts made from material conforming to ASTM A1011 shall be coated according to the applicable provisions of AASHTO M181 for Grade 2 posts, except the exterior zinc coating may be one-half of the required weight.
(e) Size. Sizes shall conform to those shown on the plans embedded below.
image1.emf
T-31.2.1 Square Metal Posts.pdf
File details come from the government source that posted it. Updated .