Shure SCM810 specs-item 5.pdf

Shure SCM810 Specs

Inputs 8 - Removable Block Connectors, balanced microphone or line level input

Output 8 - Direct Outputs (ch 1-8) 1/4" Phone jacks

Monitor/Headphone Out 1 - 1/4" TRS Phone jack (Headphone)

ALT I/O

1 - AUX line input 1/4" Phone (front panel)

1 - Microphone Logic connection DB25 male connector

Link Input/Output 2 - Link In / Link Out 1/4" Phone jacks

Impedance

Input

MIC: Designed for use with 19-600 ohm load, 1.6k ohms actual, -15dBv clipping level

LINE: Designed for use with - / < 2k ohm load, 10k ohms actual, +22dBV clipping level

AUX: Designed for use with - / < 2k ohm load, 10k ohms actual, +22dBV clipping level

SEND/RETURN: Designed for use with - / < 2k ohm load, 10k ohms, +18dBV

Output

LINE: Designed for use with >600 ohm load, 60 ohms actual, +18dBV clipping level

HEADPHONES: Designed for use with 8-200 ohms, 60 ohm recommended, 300 ohms actual, +12dBV clipping level

DIRECT OUT: Designed for use with > 2k ohm load, 1k ohms actual, +18dBV clipping level

SEND/RETURN: Designed for use with > 2k ohm load, 1k ohms actual, +18dBV clipping level

Gain

Low-impedance mic (150 ohms)Input: Line 80dB, Headphones 88dB, Direct Out 34dB - Outputs

Line Input: Line 40dB, Headphones 48dB, Direct Out -6dB - Outputs

Aux Input: Line 44dB, Headphones 52dB, - Outputs

Send/Return Input: Line 20dB, Headphones 28dB - Outputs

Hum & Noise

Equivalent Input Noise: -125dBV (150 ohm source; through 400Hz - 20kHz filter)

Equivalent Input Hum and Noise: -123 dBV (150 ohm source; through 20Hz

- 20kHz filter)

Output Hum and Noise: Master full counterclockwise -90dBV, Master full clockwise -70dBV (through 20Hz to 20kHz filter; channel controls full clockwise)

Frequency Response

50Hz to 20kHz +/- 2dB; -3dB corner at 25 Hz (Ref 1 kHz, channel controls centered)

Distortion <0.1% at +18 dBV output level, 50Hz to 20kHz

Metering 4 segment LED's

Controls

Sealed Rotary Pots: Microphone channels 1-8, AUX input, Headphone and

Master gain controls

Recessed Rotary Controls: Low Cut Filter and High- Frequency Shelving channels 1-8

Phantom Power Switches located in rear

Control Voltage Out No

Phantom Power 46 Vdc open-circuit through 6.8k ohms series resistance per DIN 45 596

Operating Temperature

Operating: 0 to 60 degrees C (32 to 140 degrees F)

Storage: -30 to 70 degrees C (-20 to 165 degrees F)

Power

SCM810: 120 Vac rated nominal, 50/60Hz, 200mA

SCM810E: 230 Vac rated nominal, 50/60Hz, 100mA

Dimensions 1.75 x 19.13 x 12.4 (44.5 x 483 x 317mm) (H x W x D)

Weight 9.57 lbs (4.3kg)

Packaging Info

Package Weight 14.25 lb

Box Dimensions (LxWxH) 21.89 x 16.772 x 2.835"