SF30_N6426720R0048-0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to update Section C, paragraph 5.3.1 from a tw o-day training course to a five-day training course. This amendment also extends the closing date and time to 9/2/2020 12:00 PM PST. All other terms and conditions remain the same.

1. CONTRACT ID CODE PAGE OF PAGES

1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 31-Aug-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N6426720R0048

X 9B. DATED (SEE ITEM 11)

07-Aug-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

31-Aug-2020

CODE

NAVAL SURFACE WARFARE CENTER CORONA DIV.

1999 FOURTH STREET BLDG 510

NORCO CA 92860

N64267 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6426720R0048

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 21-Aug-2020 12:00 PM to 02-Sep-2020 12:00 PM.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

STATEMENT OF WORK

1.0 Introduction

The Naval Air Systems Command (NAVAIR) Metrology and Calibration (METCAL) Program has a requirement to procure TestVonics Air Data Calibrators (ADC) to support the current NAVAIR METCAL pressure calibration workload. The ADCs in the NAVAIR inventory are used to control and measure altitude and airspeed pressures in Automated Test Equipment applications.

2.0 Background

These ADCs are used at intermediate level calibration laboratories afloat and ashore, as well as the depot level calibration laboratories. The workload for these ADCs has increased over the last fifteen years. At a minimum 72% of the current ADCs in the NAVAIR METCAL program’s inventory are out of service due to broken and aging components. The repair of these legacy units is not considered commercially viable. TestVonics part number (P/N) ADC-2580SYS are being procured as a replacement standard that can support the current NAVAIR METCAL pressure calibration workload.

3.0 Scope

The scope of this effort is to procure up to 135 TestVonics ADCs P/N ADC-2580SYS.

4.0 Applicable Documents

N/A

5.0 Specifications (Material/Equipment)

5.1 Hardware Requirements for the ADC system.

5.1.1 TestVonics P/N ADC-2580SYS.

5.2 Logistics Requirements

5.2.1 Operator/Service Manual(s) (CDRL T001). Technical manuals describing how to operate the ADC-2580SYS shall have information on operator safety, operating procedures for the system and preventative maintenance.

Service manuals shall contain information on safety for servicers of the ADC-2580SYS and instructions on repairing and maintaining components the Original Equipment Manufacturer (OEM) designates as user serviceable. Technical manual(s) for the operation and/or service of the ADC-2580SYS Air Data Calibrator shall be provided in accordance with CDRL T001.

N6426720R0048

5.2.2 Configuration Management/Design Analysis (CDRL E001). The hardware, software and firmware used to operate each and every calibration standard procured on any individual delivery order under this contract shall be of the same release and version. No deviation or substitution of hardware, software and/or firmware shall be done without the approval of the US Government. The Contractor shall provide the US Government the release and/or version number of each item of hardware, software and firmware included in the calibration standard in accordance with CDRL E001.

5.2.3 Software/Firmware Change Request (CDRL A001). When an item of firmware or software needs to be changed, a Software/Firmware Change Request shall be submitted to the US Government for approval in accordance with CDRL A001.

5.2.4 Calibration Certification with Report and/or Certificate of Conformance Report (CDRL A002). A calibration certification and/or Certificate of conformance with calibration data shall be provided in accordance with CDRL A002.

5.2.5 Instrument Calibration Procedure (ICP) (CDRL A003). The OEM ICP shall be provided for calibrating the ADC-2580SYS, for both manual and automated procedures, in accordance with CDRL A003.

5.2.6 Repairable Parts List (CDRL A004). A Repairable Parts list shall be provided to the Government for each standard delivered, in accordance with CDRL A004.

5.2.7 Warranty. The manufacturer shall provide the minimum commercial warranty for the calibration standard of at least one (1) calendar year from date of shipment.

5.2.8 Warranty Sticker. Each calibration standard shall have a sticker affixed to the outside of the unit enclosure.

5.2.9 All systems procured shall be serialized.

5.3 Training Requirements

5.3.1 Syllabus (A005). Contractor shall provide a five-day training course with a syllabus at the South East Regional Calibration Center, Jacksonville Florida. Training shall consist of maintenance and repair training that encompasses preventative maintenance, troubleshooting, and component removal and install in accordance with CDRL A005.

5.3.2 Curriculum Materials (A006). Contractor shall provide a list of Curriculum Materials for teaching a class to Government technicians. Materials shall include PowerPoint slides and notes including written examples in accordance with CDRL A006.

5.3.3 Maintenance & Repair Training Video (A007). Training Video shall include preventative maintenance, troubleshooting of major sub-assemblies, and component removal and installation in accordance with CDRL A007.

(End of Summary of Changes)