Servicebody1832182-2187-2203.xls
XLS spreadsheet 23 KB Posted
- Attached to
- DOT Service Bodies
- Solicitation number
- RFQ - 18P - 10060900000000001180
- Issued by
- Kennebec County, Maine
About this file
This is a specification document for steel service bodies required by the Maine Department of Transportation for installation on 2011 Ford F250SD pickup trucks. The specification details the installation of heavy-duty galvanized steel service bodies on three specific vehicle identification numbers (SPEC# 183-2182, 2187, 2203). The service bodies are 96 inches in length and 78 inches in width, featuring fully welded construction with compartments on both street and curb sides. Key components include a slammable 12-inch tailgate, exterior compartments with adjustable shelves rated for 250-pound capacity, FMVSS-compliant lighting packages, and a Class IV trailer hitch rated for minimum 6,000-pound weight carrying capacity. All hardware, latches, and hinges are specified as stainless steel. The document indicates that vehicles will be picked up at the Augusta location, serviced, and returned to the same facility, with installation costs to be included in the bid.
The specification requires Caterpillar yellow paint (code 423133) with aliphatic polyurethane enamel and reflective gray or white interior colors. All steel surfaces must be galvanized with epoxy primer and undercoated with petroleum-based material. Additional accessories include a backup alarm and a 7-way RV-style trailer connector with integral electric brake controller. The document includes a pricing matrix requiring bidders to provide unit costs and total costs, along with estimated delivery times. All electrical connections must be sealed with heat shrink and protected with heavy-duty wire loom, with scotch-lok style connectors explicitly prohibited. Bidders must provide contact information and vendor comments on the specification sheet.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Servicebody1832178.xls | XLS spreadsheet | |
| Servicebody1832168(1).xls | XLS spreadsheet | |
| Servicebody1832176-2177(1).xls | XLS spreadsheet | |
| Solicitation_terms.doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| SPEC# 183-2182, 2187, 2203 | STEEL SERVICE BODY | ||||||
| GENERAL DESCRIPTION | Heavy duty galvanized steel service body, fully welded construction. All stainless steel latches, hinges, and hardware. | ||||||
| MINIMUM SPECIFICATIONS | |||||||
| APPLICATION | 2011 Ford F250SD, (P/U Box Deleted), SRW, Reg.Cab, 2wd, 6.2 V-8 gas, 9800GVW, 137" WB, CA 56" | ||||||
| BODY SIZE | Length: 96" Width: 78" Floor Width: 38" Cabinet Height: 40" | ||||||
| BODY SHELL | 14 gauge two-sided galvanized steel or galvanneal. Compartment top and back to be one piece seamless design. Drip rails above all doors. All doors, door openings, drip rails, and other exposed steel edges to be hemmed for strength and safety. Eight mounting points, four per side. Undercoated steel rock guards at rear of wheel wells. Aluminum rock guards at front of body. | ||||||
| FLOOR | 12 gauge smooth plate with 1-3/8" return flange on each side. Cargo tie-downs mounted in each of the 4 corners. Rhinoliner (or equivalent) on floor and 1/2 way up cabinet in load area. | ||||||
| TAILGATE | 12" Slammable tailgate, pickup style release handle in the center, 14 gauge double panel construction, parallel to floor when in the down position | ||||||
| WEATHER STRIPPING | Heavy duty, closed cell automotive type | ||||||
| EXTERIOR COMPARTMENTS CONSTRUCTION | Side compartment back panel overlaps and interlocks with floor flange for compartment weight support. 20 gauge 2 sided galvanized steel double panel exterior doors with 2 stage slam type rotary latches, heavy duty adjustable strikers, theft proof replaceable hinges, keyed alike locks. Single chains or cables on all vertical doors. Double chains or cables on all horizontal doors. Shelves to be 18 gauge galvanized, hemmed, rated for 250lb. capacity, with multiple divider kits. Drains and vents in all compartments. Note-All stainless steel latches, hinges, & hardware!! | ||||||
| EXTERIOR COMPARTMENTS LAYOUT | Street Side & Curb side: Front Compartments= 40"h x 31"w x 20"d with two adjustable shelves per side. Horizontal compartments= 44"w x 20"d with no shelves. Rear Compartments=40"h x 21"w x 20"d with one shelf per side. | ||||||
| LIGHTS | FMVSS lighting package. Quick connect loomed wiring harness. Flush mounted tail and backup lights, clearance lights and reflectors. License plate light with bracket. | ||||||
| PAINT | All steel surfaces galvanized and epoxy primer. Exterior paint to be Aliphatic polyurethane enamel such as Dupont Imron 3.5, Caterpillar yellow, code "423133". Interior color to be reflective gray or white. All undercarriage surfaces to be fully undercoated with petroleum base material. | ||||||
| BUMPER & TRAILER HITCH | 8" steel tread plate step (no recess), Class IV trailer hitched rated for a minimum 6000 lbs weight carrying! | ||||||
| FUEL FILL CONE | Aluminium or stainless steel, marked "Unleaded Fuel Only". | ||||||
| INSTALLATION | Vehicle to be picked up at our location in Augusta, items installed, and vehicle returned to CFM in Augusta. (Please include in bid!!) All electrical connections to be sealed with heat shrink and fully protected with heavy duty wire loom. Absolutely no "Scotch-Lok" style connectors | ||||||
| ACCESSORIES | Back up Alarm, 7 way RV style trailer connector (Integral Electric brake controller equipped from factory). | ||||||
| MAKE | Model | ||||||
| Possible Quantity | Unit Cost | Total Cost | |||||
| 3 | |||||||
| Bidder (Vendor) | Contact Person | Contact's Telephone | |||||
| VENDOR COMMENTS | |||||||
| ESTIMATED TIME FOR DELIVERY: |
Sheet2
Sheet3
File details come from the government source that posted it. Updated .