SEL_Controller_Spec_Sheet.pdf

SEL-2431

Single-Phase Voltage Regulator Control, Two 120 Vac Voltage Inputs, Eight Contact Inputs (Two 120 Vac Programmable, Four 12 Vdc Self-Whetted Programmable, and Two Dedicated), Seven Contact Outputs (Four

Programmable and Three Dedicated), Front Panel EIA-232 Port, Standard with ACSELERATOR QuickSet

SEL-5030

Software (1)

Part Number: 2 4 3 1 0 1 1 X 1 X X

Firmware Standard - Voltage Regulator Control with Forward/Reverse Operating Modes, Line

Drop Compensation, SELOGIC

Programming, Metering, Event Reporting, SER, Load Profiling, Synchrophasors and Load Sense Technology

USB Interface

None 0

Type A USB Flash Drive Interface 1

Power Supply

Standard - 120 Vac, 50/60 Hz 1

Manual Raise/Lower Operators

Pushbutton Raise/Lower Operators

(2) 1

Toggle Switch Raise/Lower Operators 2

Communications Port (Port 1)

None X

EIA-232

(3) 1

EIA-485 (4-wire)

(3) 2

Fiber Optic, 200µm, Multimode, VPIN

Style Connector (3)(4)

Fiber Optic, 62.5µm, Multimode, ST Style

Connector (3)(4)

EIA-485 (2-wire)

(11) 5

Communications Port (Port 2)

None (Future Serial Compatible) X

None (Future Ethernet Compatible) 0

EIA-232

(3)

* 1

EIA-485 (4-wire) (3)

* 2

Fiber Optic, 200µm, Multimode, VPIN

Style Connector (3)(4)

Fiber Optic, 62.5µm, Multimode, ST Style

Connector (3)(4)

EIA-485 (2-wire) (11)

* 5

Two 100BASE-FX Multimode Fiber (12)

* 6

Two 10/100BASE-T Copper (13)

* 7

One 10/100BASE-T Copper (13)

, One

100BASE-FX Multimode Fiber (12)

Two 100BASE-LX Single-Mode Fiber (12)

* 9

One 10/100BASE-T Copper (13)

, One

100BASE-LX Single-Mode Fiber (12)

A

Copyright © SEL 2012-2018 All rights reserved.

1 of 5 WI-10650 20180702

1 1 4 8 2 4 0 X X

Please be sure to spec Controller to brand specific Regulator

Conformal Coat

None X

Conformal Coated Circuit Boards* 2

Retrofit Kits (Wiring Harness and Mounting Hardware) (8)

None X X

Siemens/Allis-Chalmers: 10-Position

Polarized Disconnect Switch (PDS)

Interface (5)

1 0

Howard Industries: 10-Position Connector

Terminal Strip (CTS) Interface (5)

2 0

Cooper/McGraw-Edison: 18/10-Position

Fanning Strip (Traditional) Interface (5)

3 0

Cooper: 20-Position Connector (Dead-

Front) Interface (5)

3 1

GE: Fork-Terminal Connection (Traditional

Interface to Cabinet NN Terminals) (5)

4 0

GE: 24-Position Connector (Power

Disconnect Interface) (5)

4 1

Generic Fork Terminals for Siemens/Allis-

Chalmers/Howard/GE (Does not Include

Mounting Hardware) (9)

0 1

Generic Fork Terminals for Cooper/McGraw-Edison (Does not Include

Mounting Hardware) (9)

0 2

Packaged Accessories

None X X

SEL-2401 Satellite-Synchronized Clock

Accessory (7)

1 1

SEL-2431 Surge-Suppression Accessory* 1 2

Industrial Temperature-Rated USB Flash Drive, 1 GB*

1 3 0

Accessories Retrofit Kits (Wiring Harness and Mounting Hardware)

Siemens/Allis-

Chalmers: 10-

Position Polarized Disconnect Switch

(PDS) Interface Kit (5)

9 2 5 3 0 0 2

Howard Industries:

10-Position

Connector Terminal Strip (CTS) Interface

Kit (5)

9 2 5 3 0 0 3

Cooper/McGraw-

Edison; 18/10-

Position Fanning Strip (Traditional

Interface Kit) (5)

9 2 5 3 0 0 4

Cooper: 20-Position

Connector (Dead-

Front) Interface Kit (5)

9 2 5 3 0 0 5

GE: Fork-Terminal

Connection

(Traditional Interface to Cabinet NN

Terminals) Kit (5)

9 2 5 3 0 0 6

GE: 24-Position

Connector (Power

Disconnect Interface)

Kit (5)

9 2 5 3 0 0 7

Copyright © SEL 2012-2018 All rights reserved.

2 of 5 WI-10650 20180702

Generic Fork

Terminals for

Siemens/Allis- Chalmers/Howard/GE

(Does not Include

Mounting Hardware) (9)

9 2 5 3 0 0 1

Generic Fork Terminals for

Cooper/McGraw-

Edison (Does not

Include Mounting

Hardware) (9)

9 2 5 3 0 5 5

Mounting Hardware Kits

Siemens/Allis-

Chalmers Mounting

Hardware Kit* 9 2 5 3 0 5 9

Howard Mounting

Hardware Kit* 9 2 5 3 0 6 0

Cooper/McGraw- Edison Mounting

Hardware Kit* 9 2 5 3 0 5 8

GE Mounting

Hardware Kit* 9 2 5 3 0 5 7

Other Accessories

SEL-2401 Satellite-

Synchronized Clock

Accessory Kit (7)

9 2 5 3 0 5 1

Replacement Fuse Kit

9 2 5 3 0 5 2

SEL-2431

Configurable Labels

Kit* 9 2 6 0 0 3 4

Industrial

Temperature-Rated USB Flash Drive, 1

GB*

9 2 5 3 0 6 2

SEL-2431 Surge-

Suppression

Accessory* 9 1 5 9 0 0 4 5 5

Communications

EIA-232

Communications

Card Kit (3)

9 2 5 3 0 4 0

EIA-232

Communications

Card Kit with

Conformal Coating (3)

9 2 5 3 0 4 0 C

EIA-485 (4-wire)

Communications

Card Kit (3)

9 2 5 3 0 4 1

EIA-485 (4-wire) Communications

Card Kit with

Conformal Coating (3)

9 2 5 3 0 4 1 C

Fiber-Optic, 200µm, Multimode, VPIN

Communications

Card Kit (3)

9 2 5 3 0 4 2

Fiber-Optic, 200µm, Multimode, VPIN

Communications Card Kit with

Conformal Coating (3)

9 2 5 3 0 4 2 C

Copyright © SEL 2012-2018 All rights reserved.

3 of 5 WI-10650

Fiber-Optic, 62.5µm, Multimode, ST

Communications

Card Kit (3)

9 2 5 3 0 4 3

Fiber-Optic, 62.5µm, Multimode, ST

Communications

Card Kit with

Conformal Coating (3)

9 2 5 3 0 4 3 C

EIA-485 (2-wire)

Communications

Card Kit (11)

9 2 5 3 0 4 4

EIA-485 (2-wire) Communications

Card Kit with

Conformal Coating (11)

9 2 5 3 0 4 4 C

Ethernet Card Kit

(Two 10/100BASE-T

Copper (13)

9 2 5 3 0 6 3

Ethernet Card Kit

(Two 10/100BASE-T

Copper (13)

Conformal Coat)*

9 2 5 3 0 6 3 C

Ethernet Card Kit (One 10/100BASE-T

Copper (13)

, One

100BASE-FX

Multimode Fiber (12)

9 2 5 3 0 6 4

Ethernet Card Kit (One 10/100BASE-T

Copper (13)

, One

100BASE-FX

Multimode Fiber (12)

Conformal Coat)*

9 2 5 3 0 6 4 C

Ethernet Card Kit

(One 10/100BASE-T

Copper (13)

, One

100BASE-LX Single-

Mode Fiber (12)

9 2 5 3 0 6 5

Ethernet Card Kit (One 10/100BASE-T

Copper (13)

, One

100BASE-LX Single-

Mode Fiber (12)

Conformal Coat)*

9 2 5 3 0 6 5 C

Ethernet Card Kit

(Two 100BASE-FX

Multimode (12)

9 2 5 3 0 6 6

Ethernet Card Kit

(Two 100BASE-FX

Multimode (12)

Conformal Coat)*

9 2 5 3 0 6 6 C

Ethernet Card Kit

(Two 100BASE-LX

Single-Mode Fiber (12)

9 2 5 3 0 6 7

Ethernet Card Kit

(Two 100BASE-LX

Single-Mode Fiber (12)

, Conformal Coat)

9 2 5 3 0 6 7 C

Copyright © SEL 2012-2018 All rights reserved.

4 of 5 WI-10650

EIA-485 DB9 to

4-Position

Compression Terminal Block

Adapter (2-wire 485)

C 6 7 7

EIA-485 DB9 to

8-Position Compression

Terminal Block

Adapter (4-wire 485)

C 6 7 8

Literature

Printed Instruction

Manual

(10) P M 2 4 3 1 - 0 1

* Additional Cost

(1) Download ACSELERATOR QuickSet SEL-5030 software for free at https://www.selinc.com/softwaresolutions/. ACSELERATOR QuickSet on CD (503001WX4) is available upon request.

(2) Membrane Raise/Lower Pushbuttons do not provide manual operation when control power is lost.

(3) Communication Port includes SEL-ASCII, SEL Compressed ASCII, Fast Meter, Fast Operate, PMU, and DNP3 Level 2 Slave protocols.

(4)

The optional VPIN style fiber-optic communication port is compatible with SEL-2800 and SEL-2810 Fiber-Optic Transceiver/Modems. The optional ST style fiber-optic communication port is compatible with the SEL-2812 Fiber-Optic

Transceiver/Modem.

(5)

Includes mounting hardware (hinges and latch), and all necessary wiring harnesses (including PDS, CTS, Fanning Strip, or other applicable enclosure connector for mating with existing voltage regulator interfaces).

(7)

The SEL-2401 requires an EIA-232 or EIA-485 (4-wire) card in Port 1 for IRIG-B.

(8)

The SEL-2431 supports the following Single Phase Voltage Regulators:

- Siemens/Allis-Chalmers or Howard Type A with both a source and a load side PT.

- Siemens/Allis-Chalmers Type A Single Phase Voltage Regulator with only a source side PT.

- General Electric or Cooper/McGraw Edison Type A.

- Siemens/Allis-Chalmers, General Electric, Howard, or Cooper/McGraw Edison Type B.

(9)

Does not include mounting hardware (hinges and latch). Includes wiring harness only. If mounting hardware is required, select appropriate kit from Accessories.

(10) The SEL-2431 comes standard with a CD manual. One complimentary printed instruction manual is available upon request with each product purchased.

(11)

Communication Port includes: DNP3 Level 2 Slave protocol.

(12)Fiber Ethernet ports use LC connectors. 100BASE-FX is capable of up to 2 km distance. 100BASE-LX is capable of up to 10 km distance.

(13)

Copper Ethernet ports use RJ45 connectors and are capable of up to 100 m distance.

2350 NE Hopkins Court - Pullman, WA 99163 USA Phone: +1.509.332.1890 - Fax: +1.509.332.7990

Copyright © SEL 2012-2018 All rights reserved.

5 of 5 WI-10650