Seismograph Spec Sheet 11.2.23 (3).docx

Spec Sheet

The Illinois Department of Natural Resources would like to solicit quotes for eighteen (18) White Seismology Mini Seis III Pro seismographs.

Requirements include:

· Three seismic channels and one acoustic channel with options for additional channels

Seismic:

· Range- 260 mm/s (10.24 ips)

· Resolution- 0.008 mm/s (.003 ips)

· Frequency range- 2-250 Hz at 1024 sample rate as per ISEE Seismograph Performance Specifications for Blasting Seismographs 2017 Edition

· Frequency Range- From 1 to 315 Hz

· Accuracy- Must conform with ISEE Performance Specifications for Blasting Seismographs 2017 Edition

· Transducer density- Approximately 2.01 g/cc

Acoustic:

· Weighting- Linear overpressure

· Range- .0156 Pa (.000156 Mb)

· Frequency Range- 2-250 Hz at 1024 samples/second as per ISEE Seismograph Performance Specifications for Blasting Seismographs 2017 Edition

· Linear Accuracy- Must conform with ISEE Performance Specifications for Blasting Seismographs 2017 Edition

Timer:

· On/Off capability

· Capable of allowing the user to select times to be active on a daily basis

Communications:

· High Speed USB or serial

Storage Capacity:

· Minimum of 3.5 GB memory

Operating modes:

· Waveform, histogram, histogram/waveform, and manual

Data Reporting:

· Events should be capable of being reported without deactivating the current operating mode

· Data should be capable of being downloaded without deactivation of the current operating mode

Waveform Modes

· Standard mode used for blast monitoring and discrete transient event monitoring

· Capable of manual triggering from keypad

· Capability to connect multiple units to allow for simultaneous triggering

· Sample rates capable of 1024, 2048, 4096, 8192, and 16384 samples/second/channel

· Capability of 1-120 seconds at all sample rates

· Up to 1 second pre-trigger at 1024 sample rate

· Minimum seismic trigger level of .01 ips

· Minimum linear acoustic trigger level of 88 dB

· Units must have no downtime between recorded events

· Units must be capable of performing sensor testing upon completion of each event

Histogram Modes

· Standard Histogram mode

· Histogram/Waveform capability

· Sample rates capable of 1024, 2048, and 4096

· Multiple sample periods

Other

· Units will possess the capability for remote wireless reporting as a future option, however not activated at time of purchase

· Capability to download events to a USB thumb drive directly from the unit

· Units should track changes to setup parameters and system operation

· User friendly keypad

· Operating temperature of 0-130 degrees F

· Each unit will display and record Date and time

· Capable of connecting to an external power source (e.g., solar panel, external battery)

· Units will include a protective case for storage the seismograph unit, geophone, microphone, and miscellaneous cables. The protective case must fit into a Pelican Storm Case Model iM2600.

· Shipping costs to be included with bid.

· Shipping F.O.B.

· Product must be new, unused, and free from defects.

· Vendor to provide training on equipment operation and maintenance upon delivery.

· Vendor shall provide two (2) copies of operator and maintenance manuals upon delivery.

Product Name: White Seismology Model: Mini-Seis® III Pro (standard geophone and linear microphone) Quantity: 18