Section J - Complete.pdf

PDF 10 MB Posted

Attached to
WHEELER DRY DOCK
Solicitation number
W912P820B0061
Issued by

About this file

This solicitation requests proposals for dry-docking services for the dredge WHEELER. The solicitation provides contact information for vendors to obtain wage rates and technical drawings for the 408 foot long, 78 foot wide steel-hulled hopper dredge with a lightship displacement of 9,846 long tons. Vendors must contact the listed contract specialist to receive electronic files detailing the vessel via secure file transfer. The solicitation is a total small business set-aside issued by the Department of the Army Corps of Engineers New Orleans District. It provides instructions for electronic submission of bids and a virtual bid opening process due to COVID-19 telework requirements preventing normal access to district buildings.

View the file

Other files

Show all 16

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SECTION J

LIST OF ATTACHMENTS

Attachment No. Description Line Item No.

J-1 Checklist for Undocking DD-1 J-2 Sketch of Hopper Door’s Pins & Bushings DD-6 J-3 Section Through Hinge Pin DD-6 J-4 Lower Push-Pull Rods DD-6 J-5 Hopper Doors Cross Section DD-6 J-6 Hopper Door – Flat Bars DD-6 J-7 Athwartship – Longitudinal Cross Section DD-6, HH-2 J-8 Layout of Tanks – Voids - Cofferdams HH-16 J-9 Waterblast Surface Preparation Standard HH-20 J-10 Existing Coating HH-21 J-11 0.75 inch Hinge Plate Replacement DD-6 J-12 (Not Used) ------- J-13 Longitudinal Reinforced Plate HH-2 J-14 (Not Used) ------- J-15 Dock Trails TR-2 J-16 (Not Used) ------- J-17 Hopper Door Round Bar DD-6 J-18 (Not Used) ------- J-19 Government Furnished Parts H-7 J-20 Nautical Miles Chart DD-1 J-21 List Of Motors That Need Heat Lamps F-6 J-22 (Not Used) ------- J-23 Accident Prevention Program Administrative Plan H-3 LMN Form 385-43R J-24 Accident Prevention Program Hazard Analysis H-3 LMN Form 385-6-R J-25 Accident Prevention Plan Checklist Administrative H-3 Section, LMN Form 385-7-R J-26 Fuel Oil Transfer – Floating Plant, Form 414-R H-3 J-27 Hazardous Energy Control Program, US Dredge Wheeler H-3 J-28 Safe Clearance Log H-3 J-29 Safe Clearance Request Form H-3

Attachment J-1

Attachment J-2

A ttachm ent J-3 ent J-4 ent J-5 ent J-8

Attachment J-9 ttach m en t J-1 m en m en

Attachment J-17

Attachment J-19

LIST OF GOVERNMENT FURNISHED PARTS

Item Part # Description Qty

DD-6.7 4013-907-207 Bearing pot bushing 40 ea.

DD-6.8 4013-907-207 Bearing pot bushing 40 ea.

DD-6.9 4013-907-213 Hopper door pad eye bushing 14 ea.

DD-6.9 4013-904-402 Shaft 28 ea.

DD-6.10 4013-907-406 Bushing (Push/Pull rod with eye) 14 ea.

DD-6.10 4013-904-407 Shaft 14 ea.

DD-6.11 4013-907-405 Bushing (Push/Pull rod with fork) 28 ea.

DD-6.13 920504-3, 101/211 Replacement gasket assembly 14 sets (14 ea. for center seal, 56 ea. for peripheral) DD-6.13 2995 BF Goodrich, Elastolock 2995 sealant as needed

MD-1.2.1 4886-901-105 Nose ring - 18” sluice valve 10 ea.

MD-1.2.1 4886-901-108 Backing ring – 18” sluice valve 10 ea.

MD-1.2.1 4886-901-109 Rubber ring – 18” sluice valve 20 ea.

MD-1.2.2 4889-901-105 Nose ring - 24” sluice valve 4 ea.

MD-1.2.2 4889-901-108 Backing ring – 24” sluice valve 4 ea.

MD-1.2.2 4889-901-109 Rubber ring – 24” sluice valve 8 ea.

MD-1.2.3 4890-901-105 Nose ring - 26” sluice valve 4 ea.

MD-1.2.3 4890-901-108 Backing ring – 26” sluice valve 4 ea.

MD-1.2.3 4890-901-109 Rubber ring – 26” sluice valve 12 ea.

MD-1.2.4 4892-901-105 Nose ring - 30” sluice valve 6 ea.

MD-1.2.4 4892-901-108 Backing ring – 30” sluice valve 6 ea.

MD-1.2.4 4892-901-109 Rubber ring – 30” sluice valve 18 ea.

MD-1.2.5 4893-901-105 Nose ring - 32” sluice valve 4 ea.

MD-1.2.5 4893-901-108 Backing ring – 32” sluice valve 4 ea.

MD-1.2.5 4893-901-109 Rubber ring – 32” sluice valve 8 ea.

MD-1.2.6 4898-901-105 Nose ring - 43” sluice valve 2 ea.

MD-1.2.6 4898-901-108 Backing ring – 43” sluice valve 2 ea.

MD-1.2.6 4898-901-109 Rubber ring – 43” sluice valve 6 ea.

MD-3 2730-002-205 Casting Elbow 1 ea.

MD-3 2730-002-206 Casting Elbow 1 ea.

MD-3 ------- 26 inch valve bodies 2 ea.

MD-4 4418-909-434 Bronze Liner 1 ea.

MD-4 4418-909-435 Bronze Liner 4 halves MD-4 4418-909-438 Wear Ring 2 halves MD-4 4418-909-441 Rubber Seal 2 ea.

MD-4 4418-912-232 Shaft for center gimbal ring 4 ea.

MD-4 4418-912-233 Bushing for center gimbal ring 8 ea.

MD-4 4418-912-203 Bushing for short pipe 2 ea.

MD-4 4418-912-603 Bushing for upper frame 2 ea.

MD-5 6650-910-690 Sheave 1 ea.

MD-5 6650-919-690 Sheave 1 ea.

Attachment J-19

MD-5 6651-903-690 Sheave 1 ea.

MA-4 90MPW06560-00105 Chilled Water Unit 2 ea.

MA-7 -------- Drag Arm Winch Wire Rope 9 ea.

MA-8 70006-6650-907-690 Sheave 2 ea.

MA-8 70006-6650-905-690 Sheave 2 ea.

MA-12 --------- Hydro-Pneumatic Tank 1 ea.

MA-13 914-433-011, item 14 Sheave 6 ea.

MA-13 914-433-011, item 9 Shaft 2 ea.

MA-13 914-433-011, item 10 Shaft 2 ea.

MA-15 1.0MVBIHP-4 Center Well Gimbal Gearbox 1 ea.

MA-16 MX-5 Scienco/Fast Marine Sanitation Device 1 ea.

LIST OF MOTORS THAT NEED HEATERS

ATTACHMENT J-21

SYSTEM LOCATION DECK LEVEL

Control air compressor #1 AMR 1 Control air compressor #2 AMR 1 Starting ships service air compressor #1 AMR 1 Starting ships service air compressor #2 AMR 1 Starting ships service air compressor #3 AMR 1 A/C Chilled water circulating pump #1 AMR 2 A/C Chilled water circulating pump #2 AMR 2 A/C Chill water plant #1 AMR 2 A/C Chill water plant #2 AMR 2 Potable water pressure pump #1 AMR 2 Potable water pressure pump #2 AMR 2 General seawater service pump #1 AMR 3 General seawater service pintel bearing water lube pump standby pump AMR 3 Bow thruster CPP hydraulic unit BOWTHRUSTER 1 Bow thruster motor BOWTHRUSTER 1 Central cooling freshwater circulation pump (PORT) ENG RM 3 Central cooling freshwater circulation pump standby (PORT) ENG RM 3 Central cooling freshwater circulation pump (STBD) ENG RM 3 Central cooling freshwater circulation pump standby (STBD) ENG RM 3 AFT bilge & ballast pump ENG RM 3 Dredge engine reduction gear standby L.O. pump (PORT) ENG RM 3 Dredge engine reduction gear standby L.O. pump (STBD) ENG RM 3 Emergency fire & bilge pump GEN RM 3 Controllable Pitch Propeller hydraulic oil pump (PORT) GEN RM 3 Controllable Pitch Propeller hydraulic oil pump (STBD) GEN RM 3 Controllable Pitch Propeller standby hydraulic oil pump (PORT) GEN RM 3 Controllable Pitch Propeller standby hydraulic oil pump (STBD) GEN RM 3 Propulsion engine reduction gear standby L.O. pump (PORT) GEN RM 3 Propulsion engine reduction gear standby L.O. pump (STBD) GEN RM 3 Jet pump 1 (STBD) MTR RM 3 Jet pump 2 (PORT) MTR RM 3 Hydraulic skid pump K PMP RM 1

LIST OF MOTORS THAT NEED HEATERS

ATTACHMENT J-21

Hydraulic skid pump L PMP RM 1 Hydraulic skid pump M PMP RM 1 Hydraulic skid pump A PMP RM 2 Hydraulic skid pump B PMP RM 2 Hydraulic skid pump D PMP RM 2 Hydraulic skid pump E PMP RM 2 Hydraulic skid pump F PMP RM 2 Hydraulic skid pump G PMP RM 2 Hydraulic skid pump I PMP RM 2 Hydraulic skid pump J PMP RM 2 Hydraulic skid pump C PMP RM 2 Hydraulic skid pump H PMP RM 2 Central cooling seawater circulation pump motor (PORT) PMP RM 3 Central cooling seawater circulation pump motor (STBD) PMP RM 3 Dredge pump well bilge pump (PORT) PMP RM 3 Dredge pump well bilge pump (STBD) PMP RM 3 Dredging Sluice valve flushing pump (PORT) PMP RM 3 Dredging Sluice valve flushing pump (STBD) PMP RM 3 Forward bilge & ballast pump PMP RM 3 Emergency bilge & fire pump PMP RM 3 Inboard L.P. dredge pump gland seal pump "A" PMP RM 3 Inboard H.P. dredge pump second stage gland seal pump "D" PMP RM 3 Inboard L.P. dredge pump standby gland seal pump "B" PMP RM 3 Inboard H.P. dredge pump First stage gland seal pump "C" PMP RM 3 Outboard dredge pump gland seal pump (PORT) PMP RM 3 Outboard dredge pump gland seal pump (STBD) PMP RM 3 Steering gear hydraulic pump 1 (STBD) STEERING GEAR RM 1 Steering gear hydraulic pump 2 (PORT) STEERING GEAR RM 1 Inboard dredge pump cooling (PORT) VOID #2 (PORT) 3 Inboard dredge pump cooling (STBD) VOID #2 (STBD) 3

Attachment J-23

Attachment J-23 m en t J-2

Attachment J-25

Attachment J-26

Attachment J-27

Attachment J-27

Attachment J-28

Attachment J-29

Attachment J-1 (Undocking).pdf
ACCIDENT PREVENTION PROGRAM
ACCIDENT PREVENTION PROGRAM
ADMINISTRATIVE PLAN
ACCIDENT PREVENTION PLAN CHECKLIST
USACE NEW ORLEANS DISTRICT
CONTRACT NO.
Remarks: X= OMISSIONS FROM PLAN – SUBMIT
Signature:_____________________________________________
ACCIDENT PREVENTION PLAN CHECKLIST
ADMINISTRATIVE SECTION
Attachment J-2 (Sketch of Hopper Door Pins - Bushings) .pdf
ACCIDENT PREVENTION PROGRAM
ACCIDENT PREVENTION PROGRAM
ADMINISTRATIVE PLAN
ACCIDENT PREVENTION PLAN CHECKLIST
USACE NEW ORLEANS DISTRICT
CONTRACT NO.
Remarks: X= OMISSIONS FROM PLAN – SUBMIT
Signature:_____________________________________________
ACCIDENT PREVENTION PLAN CHECKLIST
ADMINISTRATIVE SECTION
Attachment J-3 (Section Through Hinge Pin).pdf
ACCIDENT PREVENTION PROGRAM
ACCIDENT PREVENTION PROGRAM
ADMINISTRATIVE PLAN
ACCIDENT PREVENTION PLAN CHECKLIST
USACE NEW ORLEANS DISTRICT
CONTRACT NO.
Remarks: X= OMISSIONS FROM PLAN – SUBMIT
Signature:_____________________________________________
ACCIDENT PREVENTION PLAN CHECKLIST
ADMINISTRATIVE SECTION
Attachment J-4 (Lower Push-Pull Rods).pdf
ACCIDENT PREVENTION PROGRAM
ACCIDENT PREVENTION PROGRAM
ADMINISTRATIVE PLAN
ACCIDENT PREVENTION PLAN CHECKLIST
USACE NEW ORLEANS DISTRICT
CONTRACT NO.
Remarks: X= OMISSIONS FROM PLAN – SUBMIT
Signature:_____________________________________________
ACCIDENT PREVENTION PLAN CHECKLIST
ADMINISTRATIVE SECTION
Attachment J-5 (Hopper Door Cross Section).pdf
ACCIDENT PREVENTION PROGRAM
ACCIDENT PREVENTION PROGRAM
ADMINISTRATIVE PLAN
ACCIDENT PREVENTION PLAN CHECKLIST
USACE NEW ORLEANS DISTRICT
CONTRACT NO.
Remarks: X= OMISSIONS FROM PLAN – SUBMIT
Signature:_____________________________________________
ACCIDENT PREVENTION PLAN CHECKLIST
ADMINISTRATIVE SECTION
Motors requiring heaters.pdf
Motors requiring heaters

File details come from the government source that posted it. Updated .