Section_J_Attachment_3_Evaluation_Compliance_Checklist.xlsx

XLSX spreadsheet 19 KB Posted Jul 27, 2015

Attached to: Purchase standard sets of radio repeater configurations, devices, and parts
Solicitation number: SAQMMA15R0422
Issued by: Department of State Office of Acquisition Management

About this file

From the source

Section J Attachment 3 Evaluation Compliance Checklist

View the file

Other files

File	Type	Posted
SAQMMA15R0422_Amendment_003.doc	DOC document	Aug 21, 2015
SF_30_SAQMMA15R0422_A002.pdf	PDF	Aug 19, 2015
SF_30_SAQMMA15R0112_A002.pdf	PDF	Aug 17, 2015
SF_30_SAQMMA150112_A003.pdf	PDF	Aug 17, 2015
SF30_SAQMMA15R0112_A001.pdf	PDF	Aug 17, 2015
SAQMMA15R0422_Q A_August_5 _2015.docx	DOCX document	Aug 5, 2015
SAQMMA15R0422_Q A_July_30 _2015.docx	DOCX document	Jul 30, 2015
Section_J_Attachment_1_SECTION_B_PRICING.xlsx	XLSX spreadsheet	Jul 27, 2015
Section_J _Attachment_4_-_Past_Performance_Questionnaire.docx	DOCX document	Jul 27, 2015
Section_J_Attachment_2_SOW_Repeaters.docx	DOCX document	Jul 27, 2015
SAQMMA15R0422_July_27_2015.pdf	PDF	Jul 27, 2015

Show all 11

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Sheet1

Item

Repeater Specification

Pass/Fail

Item

Receiver Specification

Pass/Fail

Item

GPS Specification

Pass/Fail

Item

Comparator Specification

Pass/Fail

Item

Duplexer Specification

Pass/Fail

Item

RF Linking System 400 MHz Specification

Pass/Fail

Item

RF Linking System Ethernet Point-to-Point Bridge System 5.7 to 5.8 GHz Specification

Pass/Fail

Autosense 90-264 VAC

Drop Down

Autosense and auto-switch between AC and DC as well as DC to AC

Drop Down

Autosense and auto-switch between AC 90-264 VAC

Drop Down

Autosense and auto-switch between AC and DC as well as DC to AC

Drop Down

Temperature range of -22°F to 140°F (-30°C to 60°C)

Drop Down

Range up to 60 miles (100 kilometers)

Drop Down

Range: UP to 8 miles (14 kilometers) at 54 Mbps

Drop Down

Comment:

DC power back-up capability should power all modules, internal or external, supported by the Repeaters for each configuration kit

Drop Down

Autosense 90-264 VAC

Drop Down

Autosense 47-63 Hz

Drop Down

Autosense 90-264 VAC

Drop Down

Rack mountable into a standard 19” wide cabinet.

Drop Down

RF frequency available in the standard bands of, 400-470, or 450-490MHz.

Drop Down

Range: Up to 16 miles (26 kilometers) at 9 Mbps

Drop Down

Comment:

Autosense 47-63 Hz

Drop Down

Autosense 47-63 Hz

Drop Down

Capable of accepting DC power input

Drop Down

Autosense 47-63 Hz

Drop Down

RF cable connectors - N-type Female

Drop Down

Programmable/Adjustable transmit power – 5 to 40 watts

Drop Down

RF frequency – 5.7 to 5.8 GHz band

Drop Down

Comment:

Temperature range of -22°F to 140°F (-30°C to 60°C)

Drop Down

Temperature range of -22°F to 140°F (-30°C to 60°C)

Drop Down

Temperature range of -22°F to 140°F (-30°C to 60°C)

Drop Down

Temperature range of -22°F to 140°F (-30°C to 60°C)

Drop Down

Insertion loss TX to antenna - no greater than 0.8 dB

Drop Down

Configurable Channel spacing of 25kHz or 12.5kHz

Drop Down

Support for data rates up to 54 Mbps

Drop Down

Comment:

Autosense when batteries need charge and, if so, automatically begin charging

Drop Down

Autosense when batteries need charge and, if so, automatically begin charging

Drop Down

Rack mountable into a standard 19” wide or cabinet.

Drop Down

Rack mountable into a standard 19” wide or cabinet.

Drop Down

Isolation must be greater than 75 dB (between the receive and transmit ports)

Drop Down

Sub-audible tones (CTCSS) and (DCS) equipped

Drop Down

Point-to-point configuration

Drop Down

Comment:

Autosense when batteries are fully charged and, if so, turns off charging

Drop Down

Autosense when batteries are fully charged and, if so, turns off charging

Drop Down

Maximum Dimensions 20.5”W x 24”D x 7”H

Drop Down

Maximum Dimensions 24”D x 9”H

Drop Down

Frequency spread between transmit and receive – 3 MHz for VHF, 5 MHz for UHF

Drop Down

Compandors to eliminate radio hiss

Drop Down

Optional Antennas: 20 dBi linear polarization

Drop Down

Comment:

Programmable power output from 20 Watts to 100 Watts.

Drop Down

Built in self-test capabilities with local and remote alarm logs.

Drop Down

Maximum weight of 51 lbs.

Drop Down

Maximum weight of 51 lbs.

Drop Down

Pass-Reject type (Notch-filter type may added as an additional CLIN but should not replace Pass-Reject type)

Drop Down

Interfaces: Lease line replacement (2 or 4 wire)

Drop Down

Separate injector for indoor installations providing DC power to external components.

Drop Down

Comment:

Built in self-test capabilities with local and remote alarm logs.

Drop Down

MIL-STD-810G, , TIA/EIA, FCC, or other industry standard test certification

Drop Down

MIL-STD-810G, TIA/EIA, FCC, or other industry standard test certification

Drop Down

MIL-STD-810G, TIA/EIA, FCC, or other industry standard test certification

Drop Down

Average power out – 100 watts

Drop Down

Temperature range of -22°F to 140°F (-30°C to 60°C)

Drop Down

Externally accessible receive signal strength meter (for initial alignment)

Drop Down

Comment:

MIL-STD-810G, TIA/EIA, FCC, or other industry standard test certification

Drop Down

Programmable separate RX Network Access Codes.

Drop Down

Able to compare the voice data from a minimum of four receivers

Drop Down

Maximum input VSWR – 1.5:1

Drop Down

Rack mountable into a standard 19” wide cabinet

Drop Down

External LEDs on external component for diagnostic troubleshooting

Drop Down

Comment:

Programmable separate TX and RX Network Access Codes.

Drop Down

Configurable for 12.5 kHz and 25.0 kHz channel spacing

Drop Down

Max Height in Rack – no greater than 7 inches

Drop Down

PC Based or on-board Programming

Drop Down

Mounting kits for wall-mount and pole-mount (1.4” to 2.5”) configurations

Drop Down

Comment:

Configurable for 12.5 kHz and 25.0 kHz channel spacing

Drop Down

Modulation of 5kHz for 25 kHz and 2.5 kHz for 12.5 kHz channel spacing

Drop Down

Maximum weight – 55 lbs.

Drop Down

RF cable between injector and transmitter

Drop Down

Comment:

Modulation of 5kHz for 25 kHz and 2.5 kHz for 12.5 kHz channel spacing

Drop Down

Analog (FM) and Digital P25 (C4FM) Phase I modulation.

Drop Down

Capable of either digital/P25 or analog

Drop Down

Ethernet connection for Injector

Drop Down

Comment:

Analog (FM) and Digital P25 (C4FM) Phase I modulation.

Drop Down

Analog receive sensitivity of -116.0 dBm or better at 12dB SINAD.

Drop Down

Interface – RJ45, 10/100 Base-T Ethernet

Drop Down

Comment:

Analog receive sensitivity of -116.0 dBm or better at 12dB SINAD.

Drop Down

Digital receive sensitivity of -117.0 dBm or better at 5% BER.

Drop Down

Receive Sensitivity of -70 dB or better

Drop Down

Comment:

Digital receive sensitivity of -117.0 dBm or better at 5% BER.

Drop Down

Frequency stability to 1.0 ppm/yr or better.

Drop Down

Temperature range of -22°F to 130°F (-30°C to 54°C)

Drop Down

Comment:

Frequency stability to 1.0 ppm/yr or better.

Drop Down

Intermodulation Rejection of 80 dB

Drop Down

Adjustable Power Settings

Drop Down

Comment:

Intermodulation Rejection of 80 dB

Drop Down

Dedicated 50 Ohm antenna receive signal input port.

Drop Down

Maximum weight of 15 lbs.

Drop Down

Comment:

Dedicated 50 Ohm antenna receive signal input port.

Drop Down

Project 25 Common Air Interface Compliant

Drop Down

Results of Technical Evaluation: ______________

Comment:

Evaluator Printed Name _____________________

Dedicated 50 Ohm antenna transmit signal output port.

Drop Down

Rack mountable into a standard 19” wide or cabinet.

Drop Down

Evaluator Signaure _____________________

Comment:

Date _____________________

Project 25 Common Air Interface Compliant

Drop Down

Rack mounting screws

Drop Down

Comment:

Ability to rebroadcast subscriber radio's Project 25, MDC or Fleetsync Individual Identification (ID) number data in analog or digital formats to other subscriber radios

Drop Down

Maximum Dimensions 24”D x 9”H

Drop Down

Comment:

Ability to rebroadcast encrypted, Project 25 voice data per industry standard

Drop Down

Maximum weight of 55 lbs.

Drop Down

Comment:

Rack mountable into a standard 19” wide or cabinet.

Drop Down

Able to be connected via an Internet Protocol without external IP converters

Drop Down

Comment:

Rack mounting screws

Drop Down

Able to be connected via a 4 wire circuit when using analog.

Drop Down

Comment:

Maximum Dimensions 24”D x 9”H

Drop Down

Programming software must run on Windows 7 operating systems or newer.

Drop Down

Comment:

Maximum weight of 55 lbs.

Drop Down

Programming cable must be non-proprietary (e.g. USB, UTP, etc.)

Drop Down

Comment:

Able to be connected via an Internet Protocol without external IP converters

Drop Down

Tuning and alignment should be accomplished by using an Aeroflex 3920.

Drop Down

Comment:

Able to be connected via a 4 wire circuit when using analog.

Drop Down

Programming cable must connect directly from the computer to the radio repeater with no external converting device.

Drop Down

Comment:

Programming software must run on Windows 7 operating systems or newer.

Drop Down

Field programming capability (to allow the Government technicians to program full feature options and radio frequency parameters)

Drop Down

Comment:

Programming cable must be non-proprietary (e.g. USB, UTP, etc.)

Drop Down

Comment:

Tuning and alignment should be accomplished by using an Aeroflex 3920.

Drop Down

Comment:

Programming cable must connect directly from the computer to the radio repeater with no external converting device.

Drop Down

Comment:

Field programming capability (to allow the Government technicians to program full feature options and radio frequency parameters)

Drop Down

Comment:

Solicitation Number:SAQMMA15R0422

Evaluation Compliance Checklist Vendor:_________________________ Evaluator:_________________________

SECTION J ATTACHMENT 3

Page &P of 13

Sheet3

Sheet2

Drop Down

Pass

Fail

N/A

File details come from the government source that posted it. Updated Nov 14, 2017.