SAMPLE 4730 IRPOD 3.pdf

05/01/2025

ITEM NAMENATIONAL STOCK NUMBER

DRAWING PREPARER/MANUFACTURER

REVISION

MANUFACTURER'S PART NO./DRAWING NO. RSP

ACTIVITY N1

1H 4730-01-595-3534 X3 REDUCER 1/2 X 3/4 20190605104418

SWAGELOK CO. SOLON, OHIO 44139 SS-810-R-12(WNF) P

INDIVIDUAL REPAIR PART ORDERING DATA PAGE 1RPTR01A

A99XXXXXXF0270A

TECHNICAL CONTACT

1.0 SCOPE

THE DESIGNATION "(WNF)" AT THE END OF THE MFR'S PART NUMBER INDICATES THAT THE

SUBJECT PART SHOULD BE FURNISHED WITH A NUT AND FERRULES ON THE THREADED END AND A

NUT AND PRESWAGED FERRULES ON THE TUBE ADAPTER END.

THIS IRPOD PROVIDES THE REQUIREMENTS FOR A REPAIR PART CONSISTING

OF ONE PIECE.

2.0 LIST OF APPLICABLE DOCUMENTS

IF A SUPPLIER QUOTES TO A LATER REVISION OF THE DRAWING (OR CATALOG ITEM) THAN

SPECIFIED BELOW, SUBMITTAL OF QUOTE SHALL INCLUDE TWO (2) COPIES OF THE REVISED

DOCUMENT AND AN EVALUATION OF THE INTERCHANGEABILITY. THE FOLLOWING DOCUMENTS AND

CHANGE DATA ARE APPLICABLE TO THE EXTENT SPECIFIED IN THIS IRPOD, THE DRAWINGS, OR

OTHER DOCUMENTS INVOKED BY THIS IRPOD. CONTRACTING AGENCY APPROVAL IS REQUIRED TO

USE EARLIER SPECIFICATION VERSIONS THAN THOSE LISTED HEREIN, EXCEPT AS IDENTIFIED

BELOW. IF NO DOCUMENT VERSION IS LISTED, THEN ANY VERSION OF THE DOCUMENT MAY BE

USED.

RAW MATERIAL REQUIRED HEREIN MAY HAVE BEEN PROCESSED OR TESTED (FOR EXAMPLE, HEAT

TREATED OR ULTRASONICALLY TESTED) AS REQUIRED BY THE RAW MATERIAL SPECIFICATION

PRIOR TO RECEIPT OF THIS ORDER USING PREVIOUS VERSIONS OF PROCESSING OR TESTING

SPECIFICATIONS. THIS PROCESSING AND TESTING NEED NOT BE REPEATED IF:

1.IT COMPLIED WITH THE APPLICABLE REQUIREMENTS OF THE

PROCESSING/TESTING SPECIFICATION VERSIONS IN EFFECT AT THE TIME OF

THE ACTUAL PROCESSING OR TESTING AND;

2.ALL REQUIREMENTS OF THE RAW MATERIAL SPECIFICATION VERSION LISTED

HEREIN HAVE BEEN SATISFIED.

SECTION 6.0 IDENTIFIES SPECIAL REQUIREMENTS FOR SUBMITTAL OF THE PROCEDURES USED

FOR COMPLETED PROCESSING AND TESTING. ALL PROCESSING AND TESTING PERFORMED AFTER

RECEIPT OF THIS ORDER SHALL CONFORM TO THE PROCESSING/TESTING SPECIFICATION

VERSIONS LISTED HEREIN.

DOCUMENT NUMBER VERSION TITLE

MILITARY STANDARDS

+ MIL-STD-129 MARKING FOR SHIPMENT AND STORAGE

+ LATER VERSIONS (IE: REVISIONS, AMENDMENTS, CHANGE NOTICES

AND/OR INTERIM CHANGES) OF DOCUMENTS IDENTIFIED BY THIS SYMBOL

MAY BE USED IN THE PERFORMANCE OF THE CONTRACT. WHICHEVER

VERSION IS USED MUST BE USED IN ITS ENTIRETY. THE LATER

VERSION MAY BE IDENTIFIED AS "MIL-DTL-" OR "MIL-PRF-" AS

APPLICABLE, WHICH IS EQUIVALENT TO "MIL-#-" (WHERE # IS AN

ALPHA CHARACTER).

3.0 TECHNICAL REQUIREMENTS

05/01/2025

ITEM NAMENATIONAL STOCK NUMBER

DRAWING PREPARER/MANUFACTURER

REVISION

MANUFACTURER'S PART NO./DRAWING NO. RSP

ACTIVITY N1

1H 4730-01-595-3534 X3 REDUCER 1/2 X 3/4 20190605104418

SWAGELOK CO. SOLON, OHIO 44139 SS-810-R-12(WNF) P

INDIVIDUAL REPAIR PART ORDERING DATA PAGE 2RPTR01A

A99XXXXXXF0270A

TECHNICAL CONTACT

3.1 MATERIAL REQUIREMENTS

REDUCER 1/2 X 3/4 SS-810-R-12(WNF)

THE SUBJECT PART SHOULD BE FURNISHED WITH A NUT AND FERRULES ON THE THREADED END

AND A NUT AND PRESWAGED FERRULES ON THE TUBE ADAPTER END.

3.2 MANUFACTURING AND PROCESS REQUIREMENTS

REDUCER 1/2 X 3/4 SS-810-R-12(WNF)

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED OR COME

IN DIRECT CONTACT WITH HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT.

4.0 QUALITY ASSURANCE PROVISIONS

INTENTIONALLY LEFT BLANK

5.0 PREPARATION FOR DELIVERY

REDUCER 1/2 X 3/4 SS-810-R-12(WNF)

MARKING REQUIREMENTS:

MARKING AND LABELING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

BAR CODE MARKING SUITABLE FOR HAND SCANNING IS REQUIRED.

IN ADDITION TO THE STANDARD MARKING REQUIREMENTS OF MIL-STD-129,

THE SELLER SHALL INCLUDE THE MANUFACTURER'S COMMERCIAL AND

GOVERNMENT ENTITY (CAGE) CODE AND THE MANUFACTURER'S REFERENCE/

PART NUMBER (MFR/PN) ON INTERMEDIATE AND UNIT PACKS.

PACKAGING AND PACKING REQUIREMENTS:PACKAGING CODES FOR MIL-STD-2073-1 SHALL BE AS

SPECIFIED ELSEWHERE IN THE CONTRACT.

6.0 CONTRACT DATA REQUIREMENTS

INTENTIONALLY LEFT BLANK

6.1 PROCEDURES AND REPORTS

INTENTIONALLY LEFT BLANK

6.2 OTHER CONTRACT DATA REQUIREMENTS

INTENTIONALLY LEFT BLANK