Salient Characteristics for pallet Scale.pdf

463L Pallet Scale

SALIENT CHARACTERISTICS:

Scale must meet or exceed the following salient characteristics:

• Over-Sized Weighing Surface: Employs a platform minimum dimension of 108 x 88 inches to perfectly seat a standard HCU-6/E 463L master cargo pallet.

• Low Profile Frame Layout: Uses an ultra-low-profile design (typically under 4 inches high) or flush pit-mount assembly to minimize the required ramp incline angle.

• Heavy-Duty Structural Capacity: Features a minimum gross structural weighing threshold of 15,000 to 20,000 pounds to safely process 10,000-pound maximum cargo loads plus forklift impact forces.

• Forklift Access Channels: Includes dedicated structural fork slots or reinforced drive-on areas designed to handle 10K tactical forklifts with 72-inch tins.

• Dual-Sided Weight Indicator: Features dual display readouts or high-visibility remote scoreboard displays visible from both sides of the cargo build-up area.

• Dynamic Tare Functionality: Integrates dedicated memory presets to subtract standard 463L tare weights automatically (290 pounds for empty pallets, 355 pounds with complete net sets).

• Automated Data Interfacing: Outputs weight metrics directly via RS-232, USB, or Ethernet into military data networks like the Global Air Transportation Execution System (GATES).

• Multi-Point Load Cell Array: Incorporates at least 4 to 6 hermetically sealed shear-beam load cells to accurately compute weights even with severely off-center cargo center-of-gravity profiles.

• NIST Handbook 44 Compliance: Built and calibrated to satisfy National Institute of Standards and Technology (NIST) Handbook 44 legal-for-trade accuracy benchmarks.

• Tactical Mobility Casing: Built with modular components that allow the entire system to be quickly broken down, loaded onto a 463L pallet, and deployed via C-130 or C-17 aircraft.

• Non-Slip Top Surfacing: Mandates a diamond-tread top plate or textured anti-slip coating to protect cargo handlers from slips and falls during wet conditions.

• Tripping Hazard Prevention: Requires high-visibility safety yellow borders painted along all platform edges and transitions to comply with floor hazard standards.

• Ergonomic Incline Gradients: Employs standard entry and exit approach ramps with slopes not exceeding a 1:12 rise ratio to prevent load-pushing injuries.

• Secure Floor Anchoring: Utilizes bolt-down frame brackets or pit-locking pins to prevent the scale assembly from walking or shifting under forklift impacts.

• Intrinsically Safe Electronics: Uses FM-approved or Class I, Division 1 explosion-proof indicators if situated in cargo facilities processing volatile or hazardous materials.

• IP67 Washdown Protection: Features sealed junction boxes and stainless-steel structural electronics to endure regular pressure-washing and outdoor flight line debris.

• Corrosion Resistant Coating: Utilizes sandblasted steel components coated in chemical-resistant, catalyzed epoxy paint to withstand aircraft deicing fluids and saltwater environments.

• Extreme Temperature Tolerance: Remains calibrated and functional across arctic and tropical swings ranging from -40 to 140 degrees Fahrenheit.