Salient Characteristics for Manual End Finishing Machine.pdf
PDF 118 KB Posted
- Attached to
- Tube-Line TF3. 0 Manual End Finishing Machine
- Solicitation number
- FA488726Q0042
About this file
This is a Statement of Need for the purchase of a Tube-Line TF3.0 Manual End Finishing Machine for Luke Air Force Base, Arizona. The document outlines specific technical and operational requirements for the tubing machine that will be procured.
The machine must fit within a maximum physical footprint of 5 feet long by 4 feet wide by 4 feet high, including an integrated stand, to accommodate pre-allocated shop space. Functionally, it must perform precise 37-degree single flares and accommodate tubing with outside diameters ranging from 0.250 inches to 2.00 inches. The machine must include an integrated squaring and deburring head for clean, contamination-free tube ends; pneumatically actuated beading capabilities for secure hose-to-tube connections; and replaceable 1/16-inch thick squaring blades to facilitate rapid on-site maintenance. A critical requirement is that the jaw adaptor must be compatible with existing USAF inventory TF2.0 series jaws to prevent wasteful duplication of existing tooling assets. The manufacturer must provide a minimum 12-month warranty with remote maintenance support capabilities.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Ombudsman.pdf | ||
| Solicitation - FA488726Q0042.pdf | ||
| Anti-Terrorism Pamphlet.pdf | ||
| Brand Name Justification End Finishing Machine_Redacted.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS
FOR PURCHASE OF TUBE-LINE TF3.0 MANUAL END FINISHING MACHINE
FOR
LUKE AFB, AZ
Tubing Machine Requirements:
1. Footprint 5’L x 4’W x 4’H
• Maximum physical envelope of 5’L x 4’W x 4’H (including integrated machine stand) to fit pre-allocated shop space.
2. Flare Angle: Must be capable of performing a precise 37-degree single flare.
3. Capacity: Must accommodate a flaring and trimming range of .250” up to 2.00” Outside
Diameter (OD).
4. End Finishing: Must include an integrated squaring and deburring head to ensure clean, contamination-free tube ends.
5. Beading: Must feature pneumatically actuated beading capabilities for secure hose-to-tube connections.
6. Blades: Must utilize replaceable 1/16" thick squaring blades for rapid on-site maintenance.
7. Jaw Adaptor: Must include a jaw adaptor compatible with existing USAF-inventory TF2.0 series jaws to prevent the wasteful duplication of existing tooling assets.
Maintenance:
8. Warranty: Must include a minimum 12-month manufacturer warranty with remote maintenance support.
END OF STATEMENT OF NEED
File details come from the government source that posted it. Updated .