S02 - SOW Att Submittal 39_1 Cab 6 Design Finalized - REVIEWED.pdf

590 Means Street NW Suite 200

Atlanta, GA 30318

(404) 214-9774

January 13, 2025

SHOP DRAWING REVIEW COMMENTS

Project: Jesse Brown VA Medical Center, Chicago, IL Rehab Ogden Elevators Project No.: 537-21-101

TMM Project No.: 2037

SUBMITTAL: 039.1

SUBMITTAL

DESCRIPTION:

14 21 10 Spec Section Name

REVIEWER(S): Modernization of Traction Elevator

NOTES, COMMENTS & ACTIONS:

1. The A/E takes no exception. VA interior design review, acceptance and approval required.

(END OF NOTES, COMMENTS & ACTIONS)

Approved

The VA approval of submittals is not to be construed as a complete check, and indicates only that the general method of construction, materials, detailing, and other information are satisfactory. VA approval of a submittal does not relieve the Contractor of the responsibility for any error which may exist. The Contractor is responsible for fully complying with all contract requirements and the satisfactory construction of all work, including the need to check, confirm, and coordinate the work of all subcontractors for the project. Non-compliant material incorporated in the work shall be removed and replaced at the Contractor’s expense.

Reviewed By: Engineering Service Review on: 1/23/2025

Jesse Brown VA Medical Center

ELEVATOR PANEL(S)

(CUSTOMER SERVICE DRAWING)

APPROVAL

APPROVED BY:

COMPANY:

DATE:

***SIGNATORY PARTY IS CONFIRMING: CAB SHELL

INTERIOR DIMENSIONS, FINISHED CEILING HEIGHT,

CAB SHELL EXIT OPENING SIZE/LOCATION, DESIGN

CONFIGURATION, MATERIALS AND FINISHES.***

CAB ID :

CAB QUANTITY :

LEVELe TYPE :

SYSTEM TYPE :

CAB# 1

105A

CAPTURE

ABBREVATIONS

W1 CAB WIDTH - SHELL TO SHELL

W2 CEILING WIDTH

D1 CAB DEPTH - SHELL TO FRONT RETURN

PANEL

D2 CEILING DEPTH

H1 CAB SHELL HEIGHT

H2 CEILING HEIGHT

P1= CEILING EXIT HATCH DEPTH

P2= CEILING EXIT HATCH WIDTH

P3=

EXIT LOCATION ,SIDE TO SIDE-INTERIOR SIDE

WALL OF SHELL TO SIDE EDGE OF EXIT

OPENING

P4=

EXIT LOCATION ,FRONT TO BACK- INTERIOR

REAR WALL OF SHELL TO REAR EDGE OF EXIT

OPENING

R1= DOOR RETURN FROM LEFT SIDE

R2= DOOR RETURN FROM RIGHT SIDE

GENERAL NOTES :-

1.REFER TO PAGE#3 FOR SECTION DETAILS.

2.REFER TO PAGE#3 FOR MATERIAL FINISH & SWATCHES.

3.SQUARES REPRESENT PANEL DESIGNATIONS.

4.CIRCLES REPRESENT THE SEQUENCE OF PANEL

INSTALLATION.

5.LOOKING DOWN AT CEILING FROM ABOVE CAB.

6.A DEDICATED ELECTRICAL INPUT LINE / CIRCUIT IS

REQUIRED FORELEVATOR CEILING LIGHTING

SYTEMS.

7.INSTALLER SHOULD LOCATE THESE MOUNTING ROD

POINTS IN THE FIELD BY THE SPACE AVAILABLE

ON TOP OF THE CANOPY.

W1=85.000"

82.722"

REAR WALL PANELS

D1=50.125"

87.250"

4.000"

4.500"

H1= 95.750"

47.847"

LEFT SIDE WALL PANELS RIGHT SIDE WALL PANELS

D1=50.125"

47.847"

H2= 88.750"

2.000" 2.000" 2.000" 2.000" 2.000" 2.000"

7.000"

42.000"

CENTER

OF

HANDRAIL

18.000"

23.000"

46.250"

23.063" 23.063" 27.000" 23.063" 23.063"27.000" 27.000"

PANEL MATERIAL & FINISH SCHEDULE

PANEL ID CONFIGURATION MATERIAL / FINISH / PATTERN / TYPE

A1-A4 PANEL VIVIGRAPHIX GRAPHICA GLASS WITH CAIRO INTERLAYER IN SLATE

BLUE AND STANDARD FINISH, PART NUMBER VGR14133-0422-HG

B1-B3 PANEL VIVIGRAPHIX GRAPHICA GLASS WITH CAIRO INTERLAYER IN SLATE

BLUE AND STANDARD FINISH, PART NUMBER VGR14133-0422-HG

C1-C4 PANEL STAINLESS STEEL WITH DIAMOND FINISH

D1-D3 PANEL STAINLESS STEEL WITH DIAMOND FINISH

E1-E3 HANDRAIL PANEL(18"H) STAINLESS STEEL WITH DIAMOND FINISH

F1-F3 BASE(4" H) STAINLESS STEEL WITH DIAMOND FINISH

-- EXTRUSION FRAME LEVELE-105A PANEL FRAME COLOR: ALUMINUM, CLEAR ANODIZED

FRAME STYLE: CAPTURE

-- REVEAL LEVELE CORNER REVEALS COLOR: ALUMINUM, CLEAR ANODIZED

-- HANDRAIL SERIES: ROUND HANDRAIL 1.25" DIA. WITH RADIUS BEND END IN SATIN

STAINLESS STEEL

-- CEILING

TYPE: STAINLESS STEEL WITH DIAMOND FINISH

LIGHTING: 6 LED DOWNLIGHTS TEMP: 3000-3200K

REVEAL: 1/8" MATTE BLACK

EXTRUSION FINISH: ALUMINUM CLEAR ANODIZED

WEIGHT BREAK DOWN/CAB

-- WEIGHT IN LBS WEIGHT IN KG

LEFT SIDEWALL 160.500 72.800

REAR WALL 264.300 119.900

RIGHT SIDEWALL 160.500 72.800

HANDRAIL 33.400 15.100

CRASHRAILS 0.000 0.000

CEILING 94.600 42.900

CONSIDERED BUFFER IN % 5.000 5.000

BUFFERING WEIGHT 35.700 16.200

TOTAL CAB WEIGHT

CONSIDERING BUFFER 748.800 339.700

F2F1F3

A1 A2 A3A4 B1 B2B3

C1 C2 C3C4 D1 D2D3

39.125"

HANDRAIL O.A.

5.500"

TYP.

37.875"

HANDRAIL C.C.

18.937" 18.938"

74.000" HANDRAIL O.A. 5.500"

TYP.

72.750" HANDRAIL C.C.

24.250" 24.250"24.250"

E1

39.125"

HANDRAIL O.A.

5.500"

TYP.

37.875"

HANDRAIL C.C.

18.937" 18.938"

E3 E2

PA

TT

ER

N

_V

PA

TT

ER

N

_V

PA

TT

ER

N

_V

PA

TT

ER

N

_V

PA

TT

ER

N

_V

PA

TT

ER

N

_V

PA

TT

ER

N

_V

2 3 4

6 7 8

10 11

13 14

0.250"

FLOORING

(BY OTHERS)

TOTAL

HEIGHT

=96.000"

30.000"

CENTER

OF

HANDRAIL

ELEVATOR CEILING REFLECTED

CEILING PLAN (RCP)

P1= 16.000"

R1= 19.500"

R2= 19.500"

P4=4.000"

W1=85.000"

W2=79.026" P3=30.000"

TILE

26.875"

TILE

22.900"

TILE

21.913"

TILE

25.851"

TILE

25.851"

P2=25.000"

D2= 45.138"

46.000"W X 84.000"H

DOOR OPENING

CLEAR INSIDE CAB = 82.526"

D1= 50.125"

CLEAR

INSIDE

CAB =

48.888"

NOTE :-

F+S DOES NOT ASSUME LIABILITY FOR POTENTIAL CODE

COMPLIANCE ISSUES RESULTING FROM

CUSTOMER-DICTATED HANDRAIL PLACEMENT.

D

C

B

A

B

C

D

8 7 6 5 4 3 2 1

A

3 2 1

REV DESCRIPTION DATEREVISED BY

01 CAB DIMENSION AND CAB WEIGHT UPDATED 10/04/2024EDB

02 CONFIGURATION CHANGED TO LEVELe 105A 12/23/2024MUY

07/26/2024MHCORIGINAL RELEASE00

1. PRIMARY DIM. ARE IN INCHES &

SECONDARY [DIM] IN MM

2. TOLERANCES

FRACTIONAL: ±1/32;ANGULAR/BEND:±1°

TWO PLACE DECIMAL ±.030

THREE PLACE DECIMAL ±.020

3.REMOVE ALL BURRS AND SHARP EDGES

UNLESS OTHERWISE SPECIFIED:

DWN

CHK

DO NOT SCALE DRAWING

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

FORMS+SURFACES. ANY REPRODUCTION

IN PART OR AS A WHOLE WITHOUT

WRITTEN PERMISSION IS PROHIBITED.

PROPRIETARY AND CONFIDENTIAL

THIRD ANGLE PROJECTION

MATERIAL :

FINISH :

WEIGHT :

SCALE :

POUNDS SIZE REV SHEET

OF

DESCRIPTION:-

DWG. NO.

www.forms-surfaces.com

URBAN ELEVATOR SERVICE INC

JESSE BROWN VA OGDEN CAR #6

07/26/2024MHC

07/26/2024SWB

173194REFER JO

REFER JO

NTS B 1 3173194-02-001

APPROVAL

APPROVED BY:

COMPANY:

DATE:

***SIGNATORY PARTY IS CONFIRMING: CAB SHELL

INTERIOR DIMENSIONS, FINISHED CEILING HEIGHT,

CAB SHELL EXIT OPENING SIZE/LOCATION, DESIGN

CONFIGURATION, MATERIALS AND FINISHES.***

CAB ID :

CAB QUANTITY :

LEVELe TYPE :

SYSTEM TYPE :

CAB# 1

105A

CAPTURE

ABBREVATIONS

W1 CAB WIDTH - SHELL TO SHELL

W2 CEILING WIDTH

D1 CAB DEPTH - SHELL TO FRONT RETURN

PANEL

D2 CEILING DEPTH

H1 CAB SHELL HEIGHT

H2 CEILING HEIGHT

P1= CEILING EXIT HATCH DEPTH

P2= CEILING EXIT HATCH WIDTH

P3=

EXIT LOCATION ,SIDE TO SIDE-INTERIOR SIDE

WALL OF SHELL TO SIDE EDGE OF EXIT

OPENING

P4=

EXIT LOCATION ,FRONT TO BACK- INTERIOR

REAR WALL OF SHELL TO REAR EDGE OF EXIT

OPENING

R1= DOOR RETURN FROM LEFT SIDE

R2= DOOR RETURN FROM RIGHT SIDE

ELEVATOR CEILING REFLECTED

CEILING PLAN (RCP)

P1= 16.000"

R1= 19.500"

R2= 19.500"

P4=4.000"

CEILING EMERGENCY EXIT

DETAIL SECTION F-F

SECTION E-E

D1= 50.125"

W1=85.000"

EE

F

F

W1=85.000"

W1=85.000" W2=79.026"

P3=30.000"

P1=16.000"

P4=4.000" P3=30.000"

CEILING TILE LAYOUT

TILE

26.875"

TILE

22.900"

TILE

21.913"D1=

50.125"

TILE

25.851"

TILE

25.851"

D1= 50.125"

P1= 16.000"

P4= 4.000"

2.987" 4.737"

20.293"

ACTUAL EXIT

OPENING

BY F+S

12.000"

PARALLEL

PIPED

VOLUME

26.935"

2.000" 3.750"

7.000"

P3=30.000" P2=25.000"

7.000"

2.987" 4.737"

2.987" 4.737"

20.000"

PARALLEL

PIPED

VOLUME

26.935"

ACTUAL EXIT

OPENING

BY F+S

EMERGENCY

EXIT OPENING

IN CAB SHELL

PANEL OPENING

PROVIDED BY

F+S,REMOVED

BELOW TO OPEN

2.987"

20.293"

INTEGRATED

EMERGENCY

LIGHTING

P2=25.000"

EXIT

2.987"

D2= 45.138"

2.000"

2.987" P2=25.000"

PARALLEL

PIPED

VOLUME

20.0"

12.0"

MATERIAL & FINISH SCHEDULE

# MATERIAL / FINISH PATTERN / TYPE

CEILING TILE STAINLESS STEEL WITH

DIAMOND FINISH NONE

LIGHTS

REVEALS - - - 1/8" MATTE BLACK

EDGE EXTRUSION ALUMINUM CLEAR ANODIZED

RENDERING VIEW

FOR REFERENCE ONLY

INCLUDES INTEGRATED EMERGENCY LIGHTING AND:

(6) 6 W LED DOWN LIGHTS

COLOR TEMP: 3000-3200K, INPUT VOLTAGE: AC 120-240V

46.000"W X 84.000"H

DOOR OPENING

ELEVATOR CEILING(S)

D

C

B

A

B

C

D

8 7 6 5 4 3 2 1

A

3 2 1

REV DESCRIPTION DATEREVISED BY

01 CAB DIMENSION AND CAB WEIGHT UPDATED 10/04/2024EDB

02 CONFIGURATION CHANGED TO LEVELe 105A 12/23/2024MUY

07/26/2024MHCORIGINAL RELEASE00

1. PRIMARY DIM. ARE IN INCHES &

SECONDARY [DIM] IN MM

2. TOLERANCES

FRACTIONAL: ±1/32;ANGULAR/BEND:±1°

TWO PLACE DECIMAL ±.030

THREE PLACE DECIMAL ±.020

3.REMOVE ALL BURRS AND SHARP EDGES

UNLESS OTHERWISE SPECIFIED:

DWN

CHK

DO NOT SCALE DRAWING

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

FORMS+SURFACES. ANY REPRODUCTION

IN PART OR AS A WHOLE WITHOUT

WRITTEN PERMISSION IS PROHIBITED.

PROPRIETARY AND CONFIDENTIAL

THIRD ANGLE PROJECTION

MATERIAL :

FINISH :

WEIGHT :

SCALE :

POUNDS SIZE REV SHEET

OF

DESCRIPTION:-

DWG. NO.

www.forms-surfaces.com

URBAN ELEVATOR SERVICE INC

JESSE BROWN VA OGDEN CAR #6

07/26/2024MHC

07/26/2024SWB

173194REFER JO

NTS B 2 3173194-02-001

SECTION(S) & DETAIL(S)

APPROVAL

APPROVED BY:

COMPANY:

DATE:

***SIGNATORY PARTY IS CONFIRMING: CAB SHELL

INTERIOR DIMENSIONS, FINISHED CEILING HEIGHT,

CAB SHELL EXIT OPENING SIZE/LOCATION, DESIGN

CONFIGURATION, MATERIALS AND FINISHES.***

CAB ID :

CAB QUANTITY :

LEVELe TYPE :

SYSTEM TYPE :

CAB# 1

105A

CAPTURE

SWATCH:-

VIVIGRAPHIX GRAPHICA

GLASS WITH CAIRO

INTERLAYER IN SLATE BLUE

AND STANDARD FINISH

FOR PANEL # A1-A4,

B1-B3

SWATCH:-

STAINLESS STEEL WITH

DIAMOND FINISH

FOR PANEL # C1-C4,

D1-D3

SWATCH:-

STAINLESS STEEL WITH

DIAMOND FINISH

FOR PANEL # E1-E3, F1-F3

SWATCH:-

STAINLESS STEEL WITH

DIAMOND FINISH

FOR CEILING TILES

TYPICAL CEILING MOUNTING & LIGHTING DETAILS

6 LED DOWNLIGHTS

WITH TOP MOUNT

DOWNLIGHT

LIGHTING

2.987"

1.750"

AVERAGE

1.237"

PANEL THK.

CAB SHELL

SIDE WALL

0.125"

REVEAL

CEILING

TILE

CEILING

BACKER

DETAIL B

ENLARGE VIEW

B

TYPICAL HANDRAIL MOUNTING DETAILS

ROUND 1.25" DIAMETER WITH RADIUS BEND END

1.500''

TYP.

Ø1.250" 1.500"

TYPICAL HANDRAIL

CORNER CONDITION

HANDRAIL CONDITION

CROSS-SECTION

3.131"

BASE

FINISHED

FLOOR

0.500"

AIR GAP

2.000"

2.000"

1.750"

REAR

CORNER

REVEAL

2.000"

1.750"

REAR CORNER

REVEAL

PANEL

TYPICAL VERTICAL PANEL

CROSS-SECTION

TYPICAL HORIZONTAL PANEL

CROSS-SECTION

0.369"

1.750"

FRONT

REVEAL

1.237"

PANEL

THK.

TYPICAL PANEL MOUNTING DETAILS

PANEL

CAB

SHELL

MODIFIED KICK

SUPPORT

EXTRUSION

FRAME

EXTRUSION

FRAME

EXTRUSION

DETAIL A

ENLARGE SECTION

A

0.456"

FRAME

MODIFIED

KICK COVER

PA

TT

ER

N

_V

D

C

B

A

B

C

D

8 7 6 5 4 3 2 1

A

3 2 1

REV DESCRIPTION DATEREVISED BY

01 CAB DIMENSION AND CAB WEIGHT UPDATED 10/04/2024EDB

02 CONFIGURATION CHANGED TO LEVELe 105A 12/23/2024MUY

07/26/2024MHCORIGINAL RELEASE00

1. PRIMARY DIM. ARE IN INCHES &

SECONDARY [DIM] IN MM

2. TOLERANCES

FRACTIONAL: ±1/32;ANGULAR/BEND:±1°

TWO PLACE DECIMAL ±.030

THREE PLACE DECIMAL ±.020

3.REMOVE ALL BURRS AND SHARP EDGES

UNLESS OTHERWISE SPECIFIED:

DWN

CHK

DO NOT SCALE DRAWING

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

FORMS+SURFACES. ANY REPRODUCTION

IN PART OR AS A WHOLE WITHOUT

WRITTEN PERMISSION IS PROHIBITED.

PROPRIETARY AND CONFIDENTIAL

THIRD ANGLE PROJECTION

MATERIAL :

FINISH :

WEIGHT :

SCALE :

POUNDS SIZE REV SHEET

OF

DESCRIPTION:-

DWG. NO.

www.forms-surfaces.com

URBAN ELEVATOR SERVICE INC

JESSE BROWN VA OGDEN CAR #6

07/26/2024MHC

07/26/2024SWB

173194REFER JO

NTS B 3 3173194-02-001

Ogden P-6B Jesse Brown Passenger - LEVELe-105A

The following pages provide a complete overview of the elevator interior you designed using the Elevator Design Studio. It includes material and finish information as well as the project-related details you supplied.

Configuration

LEVELe-105A

Opening Option

Front

Dimensions

D1: 50.125

W1: 85

H1: 96

H2: 91

Additional Details

Job Type:

Elevator Type:

Cab Shell Material:

Quantity: 1

Elevator Interior Weight*

Includes wall panels, handrail(s), crash rail(s), ceiling when applicable.

TOTAL:

Comments:

*Weight info is for reference only. Actual weight will vary de-pending on your specific cab size, configuration, options and the overall scope of work.

Please email us at sales@for-ms-surfaces.com to receive a detailed quote.

T 1.800.451.0410 | F 412.385.4715 | www.forms-surfaces.com © 2024 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. todd.gore@forms-surfaces.com

Page 1 of 8 | Rev. 12.13.2024 02:59:24 PMdesign # 675c9f52d9b9010008439fe7

812 lbs

Ogden P-6B Jesse Brown Passenger - LEVELe-105A

The following pages provide a complete overview of the elevator interior you designed using the Elevator Design Studio. It includes material and finish information as well as the project-related details you supplied.

Configuration

LEVELe-105A

Opening Option

Front

Dimensions

D1: 50.125

W1: 85

H1: 96

H2: 91

Additional Details

Job Type:

Elevator Type:

Cab Shell Material:

Quantity: 1

Comments:

T 1.800.451.0410 | F 412.385.4715 | www.forms-surfaces.com © 2024 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. todd.gore@forms-surfaces.com

Page 3 of 8 | Rev. 12.13.2024 02:59:24 PMdesign # 675c9f52d9b9010008439fe7

Ogden P-6B Jesse Brown Passenger - LEVELe-105ACONFIGURATION OVERVIEW

PANELS

A : All

A ViviGraphix Graphica Cairo Slate Blue Standard

B : All

B ViviGraphix Graphica Cairo Slate Blue Standard

C : All

C Stainless Steel Diamond No Pattern

D : All

D Stainless Steel Diamond No Pattern

E : All

E Stainless Steel Diamond No Pattern

F : All

F Stainless Steel Diamond No Pattern

OTHER ELEMENTS

G : Panel Frames

G Aluminum Clear Anodized

H : Corner Reveals

H Aluminum Clear Anodized

I : Handrails

I Round Satin Stainless Steel

K : Ceiling

K Stainless Steel Diamond 6 LED downlights shown at 3,200K

A:1 A:2 A:3B:1 B:2

C:1 C:2 C:3D:1 D:2

E:1 E:2

F:1 F:2

G G

H

H

H

I

I

K

T 1.800.451.0410 | F 412.385.4715 | www.forms-surfaces.com © 2024 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. todd.gore@forms-surfaces.com

Page 4 of 8 | Rev. 12.13.2024 02:59:24 PMdesign # 675c9f52d9b9010008439fe7

A : All Material: ViviGraphix Graphica Interlayer: Cairo Slate Blue Finish: Standard

B : All Material: ViviGraphix Graphica Interlayer: Cairo Slate Blue Finish: Standard

C : All Material: Stainless Steel Finish: Diamond No Pattern

T 1.800.451.0410 | F 412.385.4715 | www.forms-surfaces.com © 2024 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. todd.gore@forms-surfaces.com

Page 5 of 8 | Rev. 12.13.2024 02:59:24 PMdesign # 675c9f52d9b9010008439fe7

D : All Material: Stainless Steel Finish: Diamond No Pattern

E : All Material: Stainless Steel Finish: Diamond Pattern: No Pattern

F : All Material: Stainless Steel Finish: Diamond Pattern: No Pattern

T 1.800.451.0410 | F 412.385.4715 | www.forms-surfaces.com © 2024 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. todd.gore@forms-surfaces.com

Page 6 of 8 | Rev. 12.13.2024 02:59:24 PMdesign # 675c9f52d9b9010008439fe7

G : Panel Frames Material: Aluminum Finish: Clear Anodized Style: Capture

H : Corner Reveals Material: Aluminum Finish: Clear Anodized

I : Handrails Series: Round Option: 1.25" dia. with Radius Bend End Rail Material: Stainless Steel Rail Finish: Satin Location: Three Handrails / Back Wall + Side Walls

T 1.800.451.0410 | F 412.385.4715 | www.forms-surfaces.com © 2024 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. todd.gore@forms-surfaces.com

Page 7 of 8 | Rev. 12.13.2024 02:59:24 PMdesign # 675c9f52d9b9010008439fe7

K : Ceiling Material: Stainless Steel Finish: Diamond Lighting: 6 LED downlights shown at 3,200K

T 1.800.451.0410 | F 412.385.4715 | www.forms-surfaces.com © 2024 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. todd.gore@forms-surfaces.com

Page 8 of 8 | Rev. 12.13.2024 02:59:24 PMdesign # 675c9f52d9b9010008439fe7

820 S. Ogden – Ogden Elevators – Car #6 Cab Interior