S02 Product Descriptions.pdf

Manufacture: ULINE (Brand Name or Equal)

Model Number: 460SCRT24363

Utility cart, 31 x 19 x 33, with 4 (four) heavy duty caster wheels (2 of them locking. Includes three shelves each shelf supports up to 500 lbs. Top 2 shelves have 1" lip on three sides The cart's shelves are made of 20-gauge type 430 stainless steel Include with order: 5" Polyurethane

Caster: P/N H-5540 (Smoother rolling on floors as well as higher chemical resistance)

Manufacture: New Age Industrial Corp. (Brand Name or Equal)

Model Number: 1176A

These dollies are specifically designed to hold 20” x 20” or smaller cup and glass racks. -5” platform type swivel casters. Must include Handle

Manufacturer: Dinex (Brand Name or Equal)

Model Number: DXPTQC1T1D8

Cart is a single door tray delivery cart with an all-stainless steel modular construction. The cart has (standard) 4-3/4" tray height spacing (additional tray spacings are available - consult factory for availability) with 1 tray per shelf for a total of 8 tray capacity. Comes with heat release vented side panels and standard corner bumpers. The cart has gravity locking doors with noise suppression door bumpers and gravity locking (open) door with door stop for noise reduction. The cart comes with an interchangeable rack system with adjustable sizing to accommodate for different tray sizes. The racks also have noise reduction gravity locking brackets with a press lever release mechanism. The side panels of the cart have a noise reduction channel to prevent vibration while the cart is in motion.

Casters

The cart comes with 6" Performa casters with noise suppression bearing covers, high temperature wash resistant noise dampening bearing grease and caster isolation pads (2 rigid, 2 swivel with Tech lock brakes).

Standard Features

6" Performa casters with noise suppression bearing covers (2 rigid, 2 swivel with Tech lock brakes)

Corner bumpers

Vertical push handles

Gravity locking doors with doorstop

Full length door handles

Manufacturer: Hamilton Beach (Brand name or Equal)

Model Number: HBF510S

Heavy duty blender. This is a 64-ounce capacity blender with a stainless-steel container. It has a four cutter, one-piece stainless-steel blade. The unit is used to blend foods in commercial restaurants, hotels and hospital kitchens.

2.4 HP* moto-Adjustable Variable Speed dial and Pulse

Manufacturer: Dinex (Brand Name or Equal)

Model Number: DXPTQ2T2DPT20

Standard height, one compartment meal tray cart.

This is a centralized tray service unit with stainless steel construction, a bumper and four 6" casters to withstand heavy duty cart washing.

The cart will hold 24-28 meal trays depending on the interior slide separation.

Includes: Corner Bumpers and Vertical Push Handles Are Standard; Double Door; Features Heat

Release Vented Side Panels; Gravity Locking Doors with Door

Stop; Standard 5-1/4 in Tray Height Spacing

Manufacturer: True Manufacturing (Brand Name or Equal)

Model Number: 48" Wide 18ea 1/6th Pan Model

1 ea MEGA TOP SANDWICH / SALAD PREPARATION REFRIGERATOR

True Manufacturing Co., Inc. Model No. TFP-48-18M-D-2

Sandwich/Salad Unit, two-section, self-contained, (18) 1/6 size (4"D) poly pans, stainless steel insulated cover, 8"D x 1/2" thick cutting board, stainless steel front/top/sides, aluminum back, (1) door, (2) drawers, each drawer accommodates (1) 12"x20"x6"D pan & (3) 1/9 size or (6) 1/6 size & (3) 1/9 size pans per drawer (NOT included), (2) adjustable wire shelves, aluminum interior with stainless steel floor, rear mounted refrigeration, 2-1/2" castors, 1/5 HP, 115v/60/1, 2.9 amps, NEMA 5-15P, cULus, UL EPH Classified, MADE IN USA

1 ea Warranty - 3-year parts and labor

1 ea Warranty - 5-year compressor (self-contained only)

1 ea Self-contained refrigeration standard

Manufacturer: True Manufacturing (Brand Name or Equal)

Model Number: TFP-32-12M-D-2

1 ea MEGA TOP SANDWICH / SALAD PREPARATION REFRIGERATOR

True Manufacturing Co., Inc. Model No. TFP-32-12M-D-2

Sandwich/Salad Unit, one-section, self-contained, (12) 1/6 size (4"D) poly pans, stainless steel insulated cover, 8"D x 1/2" thick cutting board, stainless steel front/top/sides, aluminum back, (2) drawers, accommodates (2) 12"x20"x6"D pans each (NOT included), aluminum interior with stainless steel floor, rear mounted refrigeration, 2-1/2" castors, 1/5 HP, 115v/60/1, 3.3 amps, NEMA 5-15P, cULus, UL EPH

Classified, MADE IN USA

1 ea Warranty - 3-year parts and labor

1 ea Warranty - 5-year compressor (self-contained only)

1 ea Self-contained refrigeration standard

Manufacturer: Foodservice Design Professionals (Brand Name or Equal)

Model Number: CUSTOM

Worktable w/Two compartment sink. This unit has two sink compartments, one for rinse and one for wash, and is constructed of stainless steel. The dimensions should be specified as required.

Final dimension based on final dimensions of the room. Approx 10 feet overall x 36 deep x 80 high

All stainless steel

Pot Rack w/Hooks

1 U shelf

1 Open shelf

1 O Shelf

Commercial Kitchen Can Opener

The table is made of heavy-duty stainless steel with all edges rolled down at 90 degrees. Approx

10" backsplash, w/posts above and Overhead 12" deep shelf to match overall table length. The table has stainless steel legs and a stainless-steel under-shelf. Deep drawers under the worksurface for storage. The unit is used as a workstation in large kitchens, hotels, restaurants and hospitals.

Worktable approximately 30x120x54. The table is made of heavy-duty stainless steel with all edges rolled down at 90 degrees. Approx 10" backsplash, w/posts above and Overhead 12" deep shelf, beginning at Left edge and ending 24" from Right edge to allow placement of taller kitchen equipment. The table has stainless steel legs and a 2/3 width, stainless steel under-shelf, leaving room for Glasses/plates dollies to roll underneath. Deep drawers under the worksurface for storage. The unit is used as a workstation in large kitchens, hotels, restaurants and hospitals.

Manufacturer: Duke Manufacturing (Brand Name or Equal)

Model Number: 314S-2448

Special Features:

Adjustable Undershelf

Bullnose Front

Top Material 300-Series Stainless

Tabletop Steel Gauge 14

Leg Type Galvanized

Undershelf Material Galvanized

Must include one optional, 177 Deluxe Drawer w/ Stainless Front & Liner

Model Number: DXPSBH2P

Heavy-duty 304 high nickel 18-8 stainless steel construction

Fully insulated 20-gauge stainless steel lid

Forced air convection heating system

5" swivel plate casters

Corner bumpers standard

3200 watts of converted forced air heat (thermostatically controlled)

Field adjustable digital thermostat

Gasket less lid seal

Self-leveling, field adjustable spring dispensing

Two and three silo configurations

Soft-close hinges

5" polyurethane non-marking swivel casters (2 with brakes) are standard dual voltage unit is designed to draw 3200 watts at 240 volts with

13.5 Amps and 3000 watts at 208 volts with 14.5 Amps. (4800 watts for 3 silo version)

Model Number: DXPIDTS1C1622

Cantilever Single Tray & Silverware Dispenser Must Have:

Accommodates 1 stack of (150) 16-in. x 22-in. serving trays

Cantilever-style solid stainless steel tray platform

Self-elevating mechanism for dispensing

Adjustable lifting rate

Top-mounted stainless steel silverware holder

Accommodates 9 flatware cylinders (not included)

Open stainless steel tubular frame

4 non-marking corner bumpers

(4) 5-in. heavy-duty swivel casters (2 with brakes)

Color: Silver

Construction: Stainless Steel

Temperature: Unheated

Model Number: IBDRS/270

Storage Rack Must Have:

Stainless Steel Frame / 1" square stainless-steel tubing

Sized for drying and storage of Domes

270 ea. capacity

Removable cradles

Rigid frame, welded, construction with min. 1" OD square 18-gauge tubular uprights

14-gauge stainless steel "L" shape supports

5" swivel casters, 2 of them with brakes

Locking casters

Accommodates Dishes

Manufacturer: Salvajor Company (Brand Name or Equal)

Model Number: P914

Food waste disposal. The unit has a 3/4 HP heavy duty motor, a heavy cast alloy body, a 2-inch outlet and a cast-in deflector in upper chamber that force feeds waste down onto a rotor. This unit is used for disposing large quantities of the heavy waste material generated in the central areas of commercial and institutional food service operations.

CONSTRUCTION

Tank - 2 Piece Stainless Steel

Adjustable Legs - Stainless Steel

Control Panel - Stainless Steel

Salvage Basin - High Impact Polymer

Scrap Basket - High Impact Polymer

ELECTRICAL

Pre-wired NEMA 4 Control Panel

Patented Operator Sensor

Watertight Conduit/Fittings

Separate Component Grounding

Thermally Protected Motor

Safety Line Disconnect

24 Volt Safety Circuitry

PLUMBING

Corrosion Resistant Components

Automatic Water Blender

24 Volt Solenoid Valves

Unions

Check Valves

Incoming Water Valves

Non-clogging Pump Design

Pump Intake Screen

Back Flow Prevention Device

ACCESSORIES

Remote Start-Stop

Remote Mounting Bracket

Correctional Package

Control Mounting Bracket

Additional Scrap Basket

Manufacturer: Star Manufacturing (Brand Name or Equal)

Model Number: Star 736TCHSA

Electric Countertop Griddle Must Have:

36" W x 24" D cooking surface, 1" thick chrome griddle plate

150°-450°F snap-action

Thermostat and 4350-watt element

12", 5" tapered wrap-around splash guard

3 1/2-in. x 1-in. grease trough

6 qt. grease drawer

(3) Temperature adjustment knobs

Welded steel frame with stainless steel exterior

4" legs with 1-5/8" adjustment

UL EPH Classified

13.05 kW

Voltage: 208/240

Plate Material: Chrome

Must Have:

1 ea 2-year parts & labor warranty, standard

1 ea 5 yr. guarantee on the chrome plating against defect, standard

1 ea (736TCHSA-1PH) 208/240v/50/60/1-ph, 13.05 kW, 62.7/54.4 amp

Manufacturer: Berkel Equipment (Brand Name or Equal)

Model Number: M2000

Electric meat grinder. The grinder can produce 20 lbs./minute using a minimum 1 HP motor.

This unit is a heavy-duty model for chopping food in commercial and institutional food service operations.

600-800 lbs/hour Capacity

Single Speed (350RPM)

1/2 hp

All metal housing

Manufacturer: EcoLab (Brand Name or Equal)

Model Number: Multiple

Hose Reel with Hose, Mounting Bracket, and Trigger Sprayer. The hose is wall mounted and has a powder coated, heavy duty steel reel. Can be mounted vertically or horizontally. The unit is used for washing and spraying down areas/items in commercial and institutional food service operations.

Features:

Hose reel assembly, Powder coated steel. Ecolab P/N 92972015

Includes 35-foot braided hose

Hose rated for up to 300 psi

Primary construction of SBR rubber

Maximum 176F temperature

3/8-in. NPT female inlet

Swivel Mounting Bracket. Ecolab P/N 96022035

Powder coated steel

Mount vertical or horizontal does not include mounting hardware

Insulated Trigger Sprayer, Ecolab P/N 85310015

For use with Ecolab Hose Reel

Insulated to provide cooler grip surface for hot water applications

Manufacturer: Traulsen (Brand Name or Equal)

Model Number: RHF-132WP

Pass through Heated Holding Cabinet, Two door

Standard Product Features

Single Section, half door (total 4 doors) passthrough

Stainless Steel Exterior & Interior

Ducted Fan Air Distribution System

Standard Operating Temperature Range 135 to 180°F

ON/OFF Switch Located on Control Face

Half-Length Stainless-Steel Doors with Locks

Self-Closing Doors with Stay Open Feature At 120°

Standard Door Hinging

Three Adjustable Wire Shelves Per Section, Supported on Pilasters (installed at the factory)

Gasket-Protecting Metal Door Liner

Stainless Steel One-Piece Louver Assembly - Front & Rear

9' Cord & Plug Attached (one section models only)

Set of Four (4) 6" High Adjustable Stainless-Steel Legs

Manufacturer: Groen Unified Brands (Brand Name or Equal)

Model Number: 162096

Base: 40" Stainless Steel Table

Capacity: 5 gal

Design: 2/3 Jacket

Heat: Direct Steam

Type: Floor Model

Kettles: 2 - 10-quart kettles

Tilt Mechanism: Lever

Table shall be constructed of stainless steel with solid one piece welded construction.

Tabletop to have raised marine edges and a 5” wide by 4” deep drain trough running the width of the table, complete with drain fitting and strainer.

Support legs are heavy 2” round tubular stainless steel with adjustable bullet feet.

All table and dump tray surfaces polished to a uniform #3 finish

Table shall have easy to clean open leg design and meet known health department and sanitation codes, and NSF listed.

Lift out sliding dump tray slides along length of drain trough on nylon rollers

Front mounted steam control valves for each kettle

All necessary traps, piping and valves furnished and pre-piped for single point utility connection

Double pantry faucet for each kettle

Front mounted hot and cold faucet valves and swing spouts

Requires single stream, hot & cold water and drain connections

Manufacturer: Rational (Brand Name or Equal)

Model Number: ICP 6-Full/6-Full N/G

Two (2) (CC1GRRA.0000238) iCombi Pro(R) 6-Full Size Combi Ovens, double stack, natural gas, (12) 18" x 26" sheet pan or (24) 12" x 20" steam pan or (12) 2/1

GN pan capacity, (6) stainless steel grids included, intelligent cooking system with (4) assistants;

iDensityControl, iCookingSuite, iProductionManager, & iCareSystem, (6) operating modes, (5) cooking methods, (3) manual operating modes, 85° to

572°F temperature range, quick clean, care control, eco mode, 6-point core temperature probe, retractable hand shower, Ethernet interface, Wi-Fi enabled, 106,500 BTU each, 208/240v/60/1-ph, 6 ft. cord, 0.9 kW each, CE, IPX5, cCSAus, NSF, ENERGY STAR-(R).

Includes Stand I for Combi-Duo, 7-3/4"H, open sides, for iCombi 6-full size on 6-full size

Item no. right-side hinges 60.75.752

Item no. left-side hinges 60.75.754

Pan Capacity: 12

High-resolution 10.1-inch TFT color display and capacitive touchscreen

Triple glass pane cooking cabinet door with rear ventilation, thermally reflecting special coating and swiveling glass panes

Material: Glass and stainless-steel surfaces

Must include power plugs

IMPORTANT! THIS UNIT REQUIRES MULTIPLE UTILITIES AND NEEDS SITE

VERIFICATION:

See Manufacturers Specification for Installation requirements:

1) Water inlet

2) Water drain

3) Electrical connection

4) Equipotential bonding

5) Ventilation pipe

6) Ethernet interface (Verify if connection is approved by OIT)

7) Exhaust pipe gas (steam)

8) Exhaust pipe gas (convection)

Natural gas G20:

Nominal heat load, total 106500 BTU

Nominal heat load, Steam mode 80000 BTU

Nominal heat load, Hot Air mode 106500 BTU

Required connection flow pressure 6.5 – 10-inch w.c.

Electrical connection conditions:

Voltage 3 AC 208 V /240V

Connected loads - electric 22.4 kW

Steam power 18 kW

Convection power 21.6 kW

Breaker 70 A

Connection impedance 0.09 O

RCD type B

Cable diameter AWG 3 140°F

Connection conditions water:

Water inlet (pressure hose), each 3/4”

Water pressure (flow pressure), each 14.5-87.0 psi

Water drain, each 2” OD

Maximum flow rate per cooking system 3.17 gal/min

Water conditions must Meet:

Untreated water can be 0 to 24.5 gr/gal (0 to 420ppm) hardness

Recommendations for water outside of parameters:

Contaminant Water: Requirements: If > than recommended:

Sand / Particles < 15 µm Particle filter

Chlorine (Cl2) < 0.12 gr/gal (0.2 ppm) Active carbon filter

Chloride (Cl-) < 4.68 gr/gal (80 ppm) RO

Manufacturer: Groen Unified Brands (Brand Name or Equal)

Model Number: (2) GSSP-BL-5GS Double

Two stacked single compartment boiler less gas convection steamer, 54,000 BTUs per compartment.

Stainless steel construction with removable non-louvered side panels

Rear-panel vents for decreased water/spray ingress

Stainless steel field-reversible door with continuous hinge and single-piece replaceable seal

Hands-free door latch provides positive closure when pushed or slammed shut

Hidden door switch cuts power to blower fan and steam generating reservoir when door is opened

Pan support racks are stainless steel and easily removed for cleaning

Removable stainless steel condensate tray located under cavity door

ASA component control (fan, valve, etc.) allows visibility of component operation on screen

USB port for service use and firmware updates

5-day storage of error code history

Must include all connections and regulators

Manufacturer: Panasonic Corporation of North America (Brand Name or Equal)

Model Number: NE-17523

Heavy duty, counter mounted microwave oven which delivers 1700 watts of microwave energy for rapid reheating, defrosting or cooking. The unit's cabinet is made from stainless steel or other rugged material. The unit features an electronic timer with a digital readout. Some models have an additional manual dial timer.

208V Single Phase

1700 Watts

Minimum 3 Power Levels

Push Button Control

0.6 cu ft / Accommodates one half-size 6"H pan

Manufacturer: Menumaster (Brand Name or Equal)

Model Number: MXP22TLT

1 ea MICROWAVE CONVECTION OVEN

Menumaster Model No. MXP22TLT

Commercial Express Radiant/Convection/Microwave Oven, 3000w infrared radiant, 2000w convection, 2200w microwave, Catalytic converter filters grease laden air and vapors-UL-KNLZ Certified for ventless operation, capacitive touch control, 360 program memory, auto voltage sensor, cool touch exterior, drop down door, porcelain cover for infra-red radiant element, has a USB port and accepts standard flash drives + wifi enabled, includes: PA10 oven paddle, CK10 sample cleaner and oven shield, stainless steel interior & exterior with factory installed non-stick liners, 5' cord, 208-240v/60/1-ph, 5700 total watts

Manufacturer: Vulcan (Brand Name or Equal)

Model Number: 36S-6BN

Heavy Duty Range, gas, 36", (6) 35,000 BTU open burners, cast iron grates, standard oven, stainless steel front, front top ledge, sides, base, burner box & stub back, 6" adjustable legs, 260,000 BTU, CSA, NSF

1-1/4" rear gas connection, standard

Rear gas connection: cap & cover, both ends natural gas, 36" wide, 30,000BTU heavy duty infrared burner, dual control, (6) grid positions, removable pan, stainless steel front, top & sides, 3/4" gas connection & pressure regulator

Reinforced Riser, for standard or convection ovens (if mounting a 36" cheese melter or either of the salamanders on a back riser above the heavy-duty range, you must add this)

Inter-plumbing gas connection kit (requires rear gas connection on range), for connecting

36RB/36IRB to heavy duty V-Series ranges

Manufacturer: Metro Shelving (Brand Name or Equal)

Model Number: MAX4-PR48VX3

Mobile Drying Rack Unit, 48"W x 24"D x 68"H, 4-tier, for bulk drying & trays/cutting boards/sheet pans, includes: (3) open shelf frames, (1) shelf, (4) 63" mobile posts, (2) drop-ins, (1) cutting board/tray drying rack, (4) polymer swivel casters (2 with brakes), built in antimicrobial product protection, NSF

Manufacturer: Hatco Corp (Brand Name or Equal)

Model Number: TQ-400

Electric conveyor toaster. This unit can toast 480 slices per hour. Other electrical configurations are available. This unit is used in large food service operations for fresh toast or warm buns.

Color sensing system assures toast uniformity.

Efficient design of front or rear discharge

Opening height is 2" (51 mm) and for H models is 3" (76 mm)

Insulation and an interior fan provide cool surface temperatures

Toast storage area keeps bread warm and dry

Permanently lubricated ball bearing motor and heating elements

Manufacturer: Cres Cor (Brand Name or Equal)

Model Number: 207-UA-13A

Durable utility rack for transport and storage of products on a large variety of pan sizes.

Fully welded framework

Constructed of non-corrosive, Hi-Tensile aluminum

Chrome plated wire universal angles adjustable on 1-1/2" centers. Thirteen sets of angles provided, twelve are adjustable.

Heavy duty 5" swivel casters, two with brakes.

Manufacturer: Insinger (Brand Name or Equal)

Model Number: SW12P

Pass Through Pot and pan washer. This unit's wash and rinse cycles pump water and cleaning solution under pressure through its upper and lower spray arms. The washer cleans pots, large preparation bowls and kitchen appliance parts. The unit drains after each cycle.

Capacity Per Hour 13 racks/156 sheet pans

Motor Size 7 1/2 hp (wash)

208V/60/3-ph, standard

Electric Tank Heat, 9kW

Electric rinse booster heater 9kW

INCLUDE: Variable speed fan

Wash tank heat: 35 CFH natural gas 7" W.C. minute - 36,000 BTU

Steam Consumption at 10-15 psi: 18 lbs./hr. Injected (wash tank). 36 lbs./hr. Coil (wash tank)

Peak Rate Drain Flow; 5 gallons/minute

Wash tank heat: electric, gas, steam injection or steam coil

Pressure regulator

Single point electrical connection

Low water cut-off

Automatic fill

Three position wash selector (complete cycle times): Light (260 seconds), Medium (380 seconds), Heavy (500 seconds)

Emergency cycle stop button

Digital temperature controller for wash and rinse

Pan washer clean-up hose and spray gun

!! NOTE !!: Lift-up door raises to 103 inches

Detergent connection provision

Pressure regulator to maintain 20 psi rinse

INCLUDE With Order: Inbound and Outbound Table

Manufacturer: Advance Tabco (Brand Name or Equal)

Model Number: CR10-162M-X

Mobile aluminum full can rack

Holds up to 162 #10 Cans.

Sloped glides so the cans always come to the front of the rack

Constructed of aluminum with welded joints

4" casters, two with brakes, two without

Model Number: RLT132WUT-FHS

Smart Control With LED Display

R-Series: Stainless Steel Exterior & Interior

Balanced, Self-Contained Refrigeration System Using R-448A

-10°F Capable

Rear Biased Return Air Duct (2 & 3 section models only)

Full or Half-Length Stainless-Steel Doors with Locks

Self-Closing Doors with Stay Open Feature At 120 Degrees

Standard Door Hinging: 132W = Right

Automatically Activated LED Lights

Stainless Steel Breaker Caps

Three Adjustable Wire Shelves Per Section, Supported On Shelf Pins (installed at the factory)

Automatic Non-Electric Condensate Evaporator

Magnetic Snap-In EZ-Clean Door Gasket(s)

Gasket-Protecting Raised Metal Door Liner

Thermostatic Expansion Valve Metering Device

Stainless Steel One-Piece Louver Assembly

9' Cord & Plug Attached

Set of Four (4) 6" High Adjustable Stainless-Steel Legs

Voltage 115/60/1

Plug type: Nema 5-15P

Model Number: RLT232WUT-FHS

Smart Control with LED Display

R-Series: Stainless Steel Exterior & Interior

Balanced, Self-Contained Refrigeration System Using R-448A

-10°F Capable

Rear Biased Return Air Duct (2 & 3 section models only)

Full or Half-Length Stainless-Steel Doors with Locks

Self-Closing Doors with Stay Open Feature At 120 Degrees

Standard Door Hinging: 132W = Right

Automatically Activated LED Lights

Stainless Steel Breaker Caps

Three Adjustable Wire Shelves Per Section, Supported on Shelf Pins (installed at the factory)

Automatic Non-Electric Condensate Evaporator

Magnetic Snap-In EZ-Clean Door Gasket(s)

Gasket-Protecting Raised Metal Door Liner

Thermostatic Expansion Valve Metering Device

Stainless Steel One-Piece Louver Assembly

9' Cord & Plug Attached

Set of Four (4) 6" High Adjustable Stainless-Steel Legs

Plug type: Nema 5-20P

Model Number: RHT132WUT-FHG

Stainless steel exterior

Stainless steel interior

Smart Control with LED display

Self-contained, balanced refrigeration system (remote options available)

Standard operating temperature 34°F to 38°F

Self-closing door(s) with stay-open feature

Magnetic snap-in EZ-Clean door gasket(s)

Automatic non-electric condensate evaporator

Three coated shelves per section

LED lights with exterior switch*

Vertical metal door handle(s)

Stainless steel breaker caps*

Four 6" high adjustable stainless-steel legs

Refrigerant: R450A

9' plug with cord attached

Plug Type: Nema 5-15P

Model Number: ASU-10 S

One Section Air Curtain Refrigerator Must Have:

Color: Silver

Compressor Location: Bottom

Door: Solid / 270° swing

Evaporator Type Expansion Valve

Hertz: 60

Interior Material: Stainless Steel

Pan/Tray Capacity: 10

Sections: 1

Number of Shelves: None

Slide Type: Bottom Load

Air Curtain

Four (4) Locking Swivel Casters

Thermometer Type: Digital

Type: Reach In

Voltage: 120

Warranty 2-year Limited Parts; 1-year Limited Labor

Width (in): 32.75

Refrigerant: R404A

No. of Doors: 1

Slide Spacing (in): 4.5

Phase: 1

Rating: Spec

Product: Reach-In Refrigerators

Product Type: Commercial Refrigeration

NEMA: 5-15P

Hinge Configuration: Right

One piece, snap-in magnetic door gasket

Manufacturer: T&S Brass (Brand Name or Equal)

Model Number: B-0610 wall mounted hose pot filler

8" adjustable centers, 1/2" NPT male connection size

108" hose

Hook nozzle

Lever handles

Eterna cartridges with spring checks

Includes vacuum breaker and finger hook

Manufacturer: N/A

Model Number: Dish table 108" x 30

Provide fabricated, stainless steel Clean Dish table, size and shape as shown on drawings. Set table height to allow racks to move freely from Dishwasher onto table. Provide side and rear cross rails as shown on Elevation Drawings.

Where table is adjacent to wall, provide 10” high backsplash with welded enclosed ends.

16 GAUGE STAINLESS STEEL UNDERSHELF, COVE UP REAR 2", TURN DOWN

FRONT 1 1/2".

1 5/8" DIA. 16 GAUGE STAINLESS STEEL LEGS AND CROSSRAILS.

1" X 4" 14 GAUGE STAINLESS STEEL HAT CHANNEL.

16 GAUGE STAINLESS STEEL C-CHANNEL.

16 GAUGE STAINLESS STEEL 'Z' CLIP TO WALL AND SEAL.

OVERSHELF - 16 GAUGE STAINLESS STEEL, COVE UP REAR 2", TURN FRONT AND

ENDS DOWN 1", ENDS TO BE CAPPED WITH EASED CORNERS WHERE

ADJACENT TO WALL / FIXTURE

Model Number: C-24

The booster to supply the final 180°F (82°C) rinse for the dishwasher shall have the capacity to heat ... gph (lph) from 120°F to 180°F (49°C to 82°C) and it shall be rated at ... kW, ... volts, ... phase. The tank shall be designed for a working pressure of 150psi

(1034 kPa) and hydrostatically tested at 300 psi (2069 kPa) with a Castone® lining.

The heater shall be complete with all internal plumbing, including 3/4" NPT pipe and fittings for inlet and outlet. Controls shall be built-in, including contactors and prewired in accordance with UL #1453 and 422.11 NEL 2002. Proper surface mounting circuit breaker or fused disconnect switch shall be provided by electrical contractors. Electric heating elements shall be metal sheathed, controlled by an ambient compensating immersion thermostat. The boosters shall be protected with high-temperature limit switch (ECO) and low-water cut-off.

The heater shall consist of stainless-steel front and silver-gray hammertone body with standard

6" (152 mm) legs (or stainless-steel body, base, and stainless steel adjustable legs).

The heater shall include a temperature/pressure relief valve, high-temperature pressure reducing valve with bypass, and two indicating temperature/pressure

Gauges

Custom built and sized per site conditions

3ea 15" deep sinks, 2ea faucets

Over shelf across sinks

Pot hanger above

Drain board on Left side

Model Number: Custom

Custom build to fit, worktable - 48 in Stainless Steel constructed Table.

Rounded Front Edge.

Left, Right, and Rear edges to be Square with rounded (smooth) edge.

3" Backsplash on Left Half of Table.

Undershelf with small backsplash

Four legs with adjustable feet

Model Number: Custom

Worktable Food Dish-Up Table with sink, drawer, and double bar utensil rack. and Undershelf

1 1/2" X 1 1/2" X 1/8" GALVANIZED ANGLE IRON.

1" X 4" 14 GAUGE STAINLESS STEEL HAT CHANNEL.

1 5/8" DIA. 16 GAUGE STAINLESS STEEL LEGS AND CROSSRAILS.

120v 16 amps - DCR Drop Cord Receptacle. Table Receptacle.

3/4" Hot & Cold Water for Faucet

12"SQ Floor Sink

Manufacturer: Randall Unified Brands (Brand Name or Equal)

Model Number: FX-1CSRE-290

Flexible Refrigerator or Freezer Chef Stand, 38" W, 3.0 cubic feet, single drawer with removable

ABS insert, self-contained refrigeration with electronic control

(40° refrigerator, -5° freezer), stainless steel finished top, front, sides & interior, casters, R290

Hydrocarbon refrigerant, 1/4 HP, UL, NSF, cUL

2.83-cu.-ft. interior space

1 drawer with removable insert

Insert made of high-impact ABS and insulated with high-density polyurethane

Interior and exterior made of resilient stainless steel

Front breathing

Refrigeration system is self-contained

Electronic controls

Temperature holding range: -5 to 40 degrees F

Refrigeration system only operates when drawer is closed to conserve energy

Full-extension drawer tracks constructed of long-lasting stainless steel

Positioned on recessed casters

Uses eco-friendly R-290 hydrocarbon refrigerant

Model Number: N/A

Countertop Worktable w-Sink to be minimum 28" (24" clear to fit beverage dispensers) there will be Ice/water, flavored water, iced tea, and coffee dispensers custom size table per field verification of wall measurements

Sink w/faucet

Over shelf for cup trays (2 - 3 depending on height of beverages dispensers)

Manufacturer: Aladdin Temp-Rite (Brand Name or Equal)

Model Number: ADV650+

Induction base activator, heat on demand system.

Induction base activation speed of 15 seconds to keep food at or above 140F for 75+ minutes when using preheated plate and Radiance insulated dome

Up to 4 bases per minute can be heated

LED status bar for clear visual alerts

Automatic shut-off

Electrical: 208V, 240V

Plug: L15-20P