S02 D.4 - IP Cameras Requirements.pdf

693-21-107 Install Camera System Wilkes-Barre VA Medical Center

28 21 13 IP CAMERAS - 1

SECTION 28 21 13

IP CAMERAS

PART 1 GENERAL

1.1 SECTION INCLUDES

Indoor dome-type network cameras for video surveillance.

Indoor in-ceiling mount, dome-type network cameras for video surveillance.

Outdoor bullet-type network cameras for video surveillance

Outdoor dome-type network cameras for video surveillance.

Multiple Sensor, Dome-Type Network cameras for video surveillance.

Fisheye network cameras for video surveillance.

Pan-tilt-zoom network cameras with pendant mount for video surveillance.

Video Intercoms.

1.2 ADMINISTRATIVE REQUIREMENTS

Coordination:

1. Coordinate with Owner or Owner’s representative regarding camera network configuration and estimated bandwidth utilization prior to performing network connections.

Sequencing / Scheduling: Provide to Owner or Owner’s representative a schedule and list of participants required to attend coordination and progress update meetings.

1. Owner representative(s) for Facilities Management, Information Technology (IT)

Services, and Security Management.

1.3 INFORMATIONAL SUBMITTALS

Product Data: Manufacturer's product information and data sheets for each product specified in this section, including:

1. Substrate preparation instructions and recommendations

2. Installation means and methods.

3. Recommendations and requirements for proper storage and handling.

Shop Drawings:

1. Submit Manufacturer’s approved shop drawings detailing the section and elevation views of each product to be installed.

28 21 13 IP CAMERAS - 2

2. Coordinate with locations listed on Contract Drawings.

Warranty Information:

1. Submit confirmation and details of manufacturer’s warranty, extended warranty, and replacement policies.

1.4 CLOSEOUT SUBMITTALS

Supply licensing and registration information for all software, hardware, firmware, operational, and administrative licenses.

Supply network configuration backup files, restoration application and instructions.

1.5 MAINTENANCE SUBMITTALS

Spare Parts: All Spare Parts must be delivered to the owner in their original sealed packaging. Clearly label with “SPARE: DO NOT REMOVE”, and include manufacturer part numbers, and date of delivery to Owner. Store all spare parts in an environment and condition recommended by the manufacturer.

1. One spare for each 20 devices.

1.6 QUALITY ASSURANCE

Qualifications - Manufacturers: Manufacturer(s) suppling products noted in this section must have a minimum of 5 years in business.

Qualifications - Installers:

1. Installer must be licensed to install video surveillance and security equipment as required by authority having jurisdiction.

2. Installer must be capable of providing references that will attest to successful completion of projects of similar scope as the work noted in this section.

3. Installer must be certified by the manufacturer and be up to date with all training required to maintain good standing.

1.7 WARRANTY

Manufacturer Warranty: Provide manufacturer’s warranty covering parts and labor costs to repair or replace part that fail to perform.

1. Warranty Period: Parts and labor warranty for 60 months from date of Substantial

Completion or date of purchase, whichever comes first.

2. Service During Warranty: Provide direct support to Owner via phone and email, including access to training and education in the form of documents, videos and other materials via the internet.

PART 2 PRODUCTS

2.1 MANUFACTURERS

28 21 13 IP CAMERAS - 3

Basis of Design Manufacturer: Avigilon.

1. Address: 1717 McKinney Avenue, Suite 1590, Dallas, TX 75202

2. Phone: (888) 281-5182.

3. Website: www.avigilon.com.

Substitution Limitations:

1. Submit substitution requests in accordance with provisions herein.

2. Single manufacturer will provide, from a single source, a fully integrated surveillance system consisting of network cameras and the following components:

a. Video Management System Analytics.

b. Video Management System Interfaces.

c. Video Surveillance Positioning Equipment.

d. Video Surveillance Sensors.

2.2 DESIGN CRITERIA

System Design:

1. Video monitoring system must be tightly integrated using application programming interfaces and software development kits.

2. All systems must be capable of functioning autonomously during a failure of one or more of the related sections.

3. Cameras in this section must be capable of bi-directional communication.

4. Video monitoring system to be interfaced through digital communication protocols including but not limited to ASCII or Hexadecimal Data Transmissions.

System Certifications:

1. UL and cUL certification marks for Canada/USA.

Safety Standards:

1. UL/CSA/IEC/EN 62368-1.

2. With IR: IEC 62471.

Electromagnetic Emissions Standards:

1. FCC Part 15 Subpart B Class B.

2. ICES-003 Class B.

3. EN 55032 Class B.

4. EN 61000-6-3.

5. EN 61000-3-2.

6. EN 61000-3-3.

Electromagnetic Immunity Standards:

1. EN 55024.

2. EN 61000-6-1.

2.3 PERFORMANCE REQUIREMENTS

28 21 13 IP CAMERAS - 4

Standards:

1. Video Standards: H.265 / H.264 / MJPEG / HDSM SmartCodec technology.

2. Image Standards: MPEG-4 - ISO/IEC 14496-10 AVC (H.264).

3. Networking Standards:

a. IEEE 802.3af (Power over Ethernet).

b. IEEE 802.1X (Authentication).

c. IPv4 (RFC 791).

d. IPv6.

4. Interoperability Standards:

a. ONVIF Profile S.

b. ONVIF Profile T.

c. ONVIF Profile G.

Video Requirements:

1. Provide cameras capable of simultaneously delivering at least three individual video streams, for use when connecting to the Video Management Software for recording and live viewing.

2. Provide cameras with a primary stream capable of supporting the video resolution and aspect ratio and capable of generating the image framerates noted in this section.

3. By generating a secondary stream at fractional resolutions of the primary stream, Video device must support HDSM-High Definition Stream Management and/or Dynamic Bandwidth Management.

Encoding Requirements:

1. Support compression and image quality settings from 1 to 20 to configure bandwidth utilized by the camera and desired image response. Provide user configuration of compression quality and image rate per camera.

2. Provide independently configured simultaneous H.265, H.264 and Motion JPEG streams (multi-stream).

3. Support Motion JPEG encoding in a selectable range from 1 up to 30 frames per second based on resolution configured.

4. Support H.264 encoding in a selectable range from 1 up to 30 frames per second based on resolution configured.

5. Support H.265 encoding in a selectable range from 1 up to 30 frames per second based on resolution configured.

6. Support Variable Bit Rate (VBR) in H.264 with a configurable maximum bit rate threshold.

7. Support Variable Bit Rate (VBR) in H.265 with a configurable maximum bit rate threshold.

8. Provide user configuration of compression format, compression quality, maximum bit rate, key frame interval, and image rate per camera.

28 21 13 IP CAMERAS - 5

9. Support motion compensation and motion vector during motion estimation in H.264, able to maintain frame rate, regardless of scene complexity, when bandwidth is capped at 12 mbps at 30 FPS for 1-3 MP and 20 mbps at 30 FPS for 5-8 MP.

10. Support G.711 PCM 8kHz audio compression.

Provide cameras that allow video and audio signals to be transported over:

1. HTTP (Unicast).

2. HTTPS (Unicast).

3. RTP (Unicast & Multicast).

4. RTP over RTSP (Unicast).

5. RTP over RTSP over HTTP (Unicast).

6. RTP over RTSP over HTTPS (Unicast).

Image Control Requirements:

1. User Configurations Supported:

a. Automatic and manual white balance control.

b. Automatic and manually defined exposure zones operating in the range 1/7 to

1/8196 sec second.

c. Flicker control (50 Hz, 60 Hz).

d. Automatic and manual iris control.

e. Color saturation and sharpening.

f. Motion detection sensitivity and threshold.

g. Digital rotation of the image when used with control center software.

Adaptive Video Analytics Specifications For Models with Analytic Capabilities:

1. Configured Behaviors: Unlimited number of configured behaviors per video source supported.

2. Automatic Analytic set up and tuning of behavior identification:

a. Upon selection of analytic and Region of Interest (ROI), the device will automatically configure behavior identification.

b. The device will constantly monitor changes in the scene and perform a tuning of the behavior identification parameters as the scene environment changes.

3. Include detection of the following behaviors:

a. Object present in ROI.

b. Object enters ROI.

c. Object leaves ROI.

d. Object appeared.

e. Object disappeared.

f. Object crosses a line of interest or beam.

g. Object Movement Direction.

h. Object loitering.

i. Multiple objects in ROI over specified dwell time.

j. Dwell Time.

k. Number of objects exceeds limit in ROI.

l. Number of objects below limit in ROI.

28 21 13 IP CAMERAS - 6

m. Camera tampering.

Network Requirements: Provide video cameras that have the following network capabilities:

1. Supports both fixed (static) IP addresses and dynamically assigned IP addresses provided by a Dynamic Host Control Protocol (DHCP) server.

2. Supports user configuration of network parameters including:

a. Fixed (static) IP address.

b. Subnet mask.

c. Gateway.

d. Control port.

3. Are automatically detected when using a Video Management Application (VMA) or Network Video Recorder (NVR) supporting this feature.

4. Provides support for both IPv4 and IPv6 Networks.

Video Motion Detection Functionality Requirements: Provide video cameras capable of detecting motion based on:

1. Motion Detection Mask: Defined areas within the camera’s field of view for the camera to detect motion.

2. Sensitivity: How much each pixel within the masked areas must change before it is considered in motion.

3. Threshold: Percentage of pixels that must detect change.

Event Functionality Requirements: Equip cameras with an integrated event functionality, which may be triggered by:

1. Alarm input terminal.

2. Video motion detection.

3. Camera temperature outside operative range.

Protocol Support Requirements: Provide video cameras that incorporate support for at least the following:

1. IPv4.

2. IPv6.

3. HTTP.

4. HTTPS.

5. SOAP.

6. DNS.

7. NTP.

8. RSTP.

9. RTCP.

10. RTP.

11. TCP.

12. UDP.

13. IGMP.

14. ICMP.

15. DHCP.

28 21 13 IP CAMERAS - 7

16. Zeroconf.

17. ARP.

18. SNMP v2c.

19. SNMP v3.

Streaming Support Requirements: Provide video cameras that incorporate support for at least the following:

1. RTP/UDP.

2. RTP/UDP multicast.

3. RTP/RTSP/TCP.

4. RTP/RTSP/HTTP/TCP.

5. RTP/RTSP/HTTPS/TCP.

6. HTTP.

Video Overlay Requirements: Provide video cameras with the following overlay requirements:

1. 64 individually configurable privacy zones to conceal defined areas in image as non-viewable. Masks required to be dynamically adjusted based on current zoom-factor, without capability of operator bypass.

2. Video masked by privacy zones must be obscured prior to streaming.

Security Requirements: Provide video cameras with the following security requirements:

1. Support the use of the following:

a. Password protection.

b. HTTPS Encryption.

c. Digest authentication.

d. WS authentication.

e. User access Log.

f. SSL encryption.

2. Restrict access to the built-in internet server by usernames and passwords at three different user group levels.

Installation and Maintenance Requirements: Provide video cameras with the following installation and maintenance requirements:

1. Allow firmware updates via network.

2. Store customer-specific settings in a non-volatile memory which cannot be lost during power cuts or soft reset.

3. Provide Microsoft Windows based management software, allowing camera configuration, upgrade of firmware, and backup of individual camera configurations.

Diagnostics:

1. Equipped with LEDs, indicating the camera’s functional status, which may be user enabled or disabled.

2. Monitored by functionality which automatically reinitiates processes or restarts the unit if a malfunction is detected.

28 21 13 IP CAMERAS - 8

Connectivity:

1. 100BASE-TX Fast Ethernet-port with RJ-45 socket, auto negotiation of network speed and transfer mode.

2. Terminal for receiving line level analog audio from an external microphone.

3. Terminal for providing line level analog audio for connection to an external speaker.

2.4 IP CAMERA TYPES

CAMERA TYPE 1 - 2.0 MP Indoor Dome-Type Camera with 3.3 - 9 mm lens.

1. Basis of Design Product: 2.0C-H5A-D1, by Avigilon.

2. Performance:

a. Must include Avigilon VAL5 Analytic Suite

b. Image Sensor: 1/2.8 inch progressive scan CMOS.

c. Maximum Resolution:

1) Aspect Ratio: 16:9: 1920 x 1080.

d. Imaging Rate: (50 Hz/60 Hz): 25 fps/30 fps.

e. Dynamic Range:

1) WDR Off: 83 dB.

2) WDR On: 126 dB., dual exposure (30 fps).

3) WDR On: 132 dB., triple exposure (20 fps or less).

f. Minimum Illumination:

1) Color: 0.027 lux.

2) Monochrome: 0.014 lux.

g. Field of View:

1) Horizontal angle: 16:9: 34 degrees to 99 degrees.

2) Vertical angle: 16:9: 18 degrees to 53 degrees.

h. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: IEEE 802.3af Class 3 PoE Compliant.

2) AC Power: 24 V +/- 10%, 24 V +/- 10%, 13 VA min for dome

3) DC Power: 12 V +/- 10% 12 V +/- 10%, 12 W min for dome.

4) Battery Backup: 3V manganese lithium.

i. Operating Temperature:

1) Dome: -40 degrees C to +65 degrees C [-40 F to 140 F].

j. IR Illumination Operating Temperatures:

1) Indoor Dome: Up to +55 degrees C [131 F], 50% power from +44 degrees

C to +55 degrees C [111 F to 131 F].

k. IR Illumination Hysteresis:

1) Indoor Dome: +2 degrees C [3.6 F].

l. Relative Humidity: 0–95 percent (non-condensing).

m. Environmental Standards:

1) Indoor Dome Cameras:

(a) IEC 62262 IK10 Impact Rating.

28 21 13 IP CAMERAS - 9

n.

CAMERA TYPE 2 - 2.0 MP Indoor In-Ceiling Mount Camera with 3.3 - 9 mm lens.

1. Basis of Design Product: 2.0C-H5A-DC1, by Avigilon.

2. Performance:

a. Must include Avigilon VAL5 Analytic Suite

b. Image Sensor: 1/2.8 inch progressive scan CMOS.

c. Maximum Resolution:

1) Aspect Ratio: 16:9: 1920 x 1080.

d. Imaging Rate: (50 Hz/60 Hz): 25 fps/30 fps.

e. Dynamic Range:

1) WDR Off: 83 dB.

2) WDR On: 126 dB., dual exposure (30 fps).

3) WDR On: 132 dB., triple exposure (20 fps or less).

f. Minimum Illumination:

1) Color: 0.027 lux.

2) Monochrome: 0.014 lux.

g. Field of View:

1) Horizontal angle: 16:9: 34 degrees to 99 degrees.

2) Vertical angle: 16:9: 18 degrees to 53 degrees.

h. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: IEEE 802.3af Class 3 PoE Compliant.

2) AC Power: 24 V +/- 10%, 24 V +/- 10%, 13 VA min for dome

3) DC Power: 12 V +/- 10% 12 V +/- 10%, 12 W min for dome.

4) Battery Backup: 3V manganese lithium.

i. Environmental Standards:

1) Indoor Dome Cameras:

(a) IEC 62262 IK10 Impact Rating.

j.

CAMERA TYPE 3 - 2.0 MP Indoor In-Ceiling Mount Camera with 9 - 22 mm lens.

1. Basis of Design Product: 2.0C-H5A-DC2, by Avigilon.

2. Performance:

a. Must include Avigilon VAL5 Analytic Suite

b. Image Sensor: 1/2.8 inch progressive scan CMOS.

c. Maximum Resolution:

1) Aspect Ratio: 16:9: 1920 x 1080.

d. Imaging Rate: (50 Hz/60 Hz): 25 fps/30 fps.

e. Dynamic Range:

1) WDR Off: 83 dB.

2) WDR On: 126 dB., dual exposure (30 fps).

3) WDR On: 132 dB., triple exposure (20 fps or less).

28 21 13 IP CAMERAS - 10

f. Minimum Illumination:

1) Color: 0.052 lux.

2) Monochrome: 0.026 lux.

g. Field of View:

1) Horizontal angle: 16:9: 14 degrees to 31 degrees.

2) Vertical angle: 16:9: 7.8 degrees to 16.7 degrees.

h. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: IEEE 802.3af Class 3 PoE Compliant.

2) AC Power: 24 V +/- 10%, 24 V +/- 10%, 13 VA min for dome

3) DC Power: 12 V +/- 10% 12 V +/- 10%, 12 W min for dome.

4) Battery Backup: 3V manganese lithium.

i. Environmental Standards:

1) Indoor Dome Cameras:

(a) IEC 62262 IK10 Impact Rating.

CAMERA TYPE 4 - 2.0 MP Infrared Outdoor Dome-Type Camera with 3.3 - 9 mm lens.

1. Basis of Design Product: 2.0C-H5A-DO1-IR, by Avigilon.

2. Performance:

a. Must include Avigilon VAL5 Analytic Suite

b. Image Sensor: 1/2.8 inch progressive scan CMOS.

c. Maximum Resolution:

1) Aspect Ratio: 16:9: 1920 x 1080.

d. Imaging Rate: (50 Hz/60 Hz): 25 fps/30 fps.

e. Dynamic Range:

1) WDR Off: 83 dB.

2) WDR On: 126 dB., dual exposure (30 fps).

3) WDR On: 132 dB., triple exposure (20 fps or less).

f. Minimum Illumination:

1) Color: 0.027 lux.

2) Monochrome: 0.014 lux.

3) IR: 0.0 lux.

g. Field of View:

1) Horizontal angle: 16:9: 34 degrees to 99 degrees.

2) Vertical angle: 16:9: 18 degrees to 53 degrees.

h. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: IEEE 802.3af Class 3 PoE Compliant.

2) AC Power: 24 V +/- 10%, 24 V +/- 10%, 13 VA min for dome

3) DC Power: 12 V +/- 10% 12 V +/- 10%, 12 W min for dome.

4) Battery Backup: 3V manganese lithium.

i. Environmental Standards:

28 21 13 IP CAMERAS - 11

1) Outdoor Dome Cameras:

(a) UL/CSA/IEC 60950-22.

(b) IEC 60529 IP66 and IP67 Weather Rating.

(c) IEC 62262 IK10 Impact Rating.

j.

CAMERA TYPE 5 - 2.0 MP Infrared Outdoor Bullet-Type Camera with 3.3 - 9 mm lens.

1. Basis of Design Product: 2.0C-H5A-BO1-IR, by Avigilon.

2. Performance:

a. Must include Avigilon VAL5 Analytic Suite

b. Image Sensor: 1/2.8 inch progressive scan CMOS.

c. Maximum Resolution:

1) Aspect Ratio: 16:9: 1920 x 1080.

d. Imaging Rate: (50 Hz/60 Hz): 25 fps/30 fps.

e. Dynamic Range:

1) WDR Off: 83 dB.

2) WDR On: 126 dB., dual exposure (30 fps).

3) WDR On: 132 dB., triple exposure (20 fps or less).

f. Minimum Illumination:

1) Color: 0.027 lux.

2) Monochrome: 0.014 lux.

3) IR: 0.0 lux.

g. Field of View:

1) Horizontal angle: 16:9: 34 degrees to 99 degrees.

2) Vertical angle: 16:9: 18 degrees to 53 degrees.

h. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: IEEE 802.3af Class 3 PoE Compliant.

2) AC Power: 24 V +/- 10%, 15 VA min for bullet

3) DC Power: 12 V +/- 10%, 13 W min for bullet

4) Battery Backup: 3V manganese lithium.

i. Operating Temperature:

1) Bullet (enclosed space): -40 degrees C to +60 degrees C [-40 F to 140 F].

2) Bullet (ambient convection): -40 degrees C to +65 degrees C [-40 F to 149

j. IR Illumination Operating Temperatures:

1) Bullet: Up to +61 degrees C [141 F], 50% power from +55 degrees C to

+61 degrees C [131 F to 141 F].

k. IR Illumination Hysteresis:

1) Bullet: +5 degrees C [9 F].

l. Relative Humidity: 0–95 percent (non-condensing).

m. Environmental Standards:

1) Bullet Cameras:

28 21 13 IP CAMERAS - 12

(a) UL/CSA/IEC 60950-22.

(b) IEC 60529 IP66 and IP67 Weather Rating.

(c) IEC 62262 IK10 Impact Rating.

n.

CAMERA TYPE 6 - 4.0 MP Infrared Outdoor Bullet-Type Camera with 3.3 - 9 mm lens.

1. Basis of Design Product: 4.0C-H5A-BO1-IR, by Avigilon.

2. Performance:

a. Must include Avigilon VAL5 Analytic Suite

b. Image Sensor: 1/2.8 inch progressive scan CMOS.

c. Maximum Resolution:

1) Aspect Ratio: 16:9: 2560 x 1440.

2) Aspect Ratio: 4:3: 2304 x 1728.

d. Imaging Rate:

1) WDR Off: (50 Hz/60 Hz): 25 fps/30 fps.

2) WDR On: (50 Hz/60 Hz): 20 fps/20 fps.

e. Dynamic Range:

1) WDR Off: 83 dB.

2) WDR On: 126 dB.

f. Minimum Illumination:

1) Color: 0.030 lux.

2) Monochrome: 0.015 lux.

3) With IR: 0 lux.

g. Field of View:

1) Horizontal angle: 16:9: 34 degrees to 92 degrees.

2) Horizontal angle: 4:3: 34 degrees to 92 degrees.

3) Vertical angle: 16:9: 18 degrees to 50 degrees.

4) Vertical angle: 4:3: 25 degrees to 68 degrees.

h. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: IEEE 802.3af Class 3 PoE Compliant.

2) AC Power: 24 V +/- 10%, 15 VA min for bullet

3) DC Power: 12 V +/- 10%, 13 W min for bullet

4) Battery Backup: 3V manganese lithium.

i. Operating Temperature:

1) Bullet (enclosed space): -40 degrees C to +60 degrees C [-40 F to 140 F].

2) Bullet (ambient convection): -40 degrees C to +65 degrees C [-40 F to 149

j. IR Illumination Operating Temperatures:

1) Bullet: Up to +61 degrees C [141 F], 50% power from +55 degrees C to

+61 degrees C [131 F to 141 F].

k. IR Illumination Hysteresis:

1) Bullet: +5 degrees C [9 F].

28 21 13 IP CAMERAS - 13

l. Relative Humidity: 0–95 percent (non-condensing).

m. Environmental Standards:

1) Bullet Cameras:

(a) UL/CSA/IEC 60950-22.

(b) IEC 60529 IP66 and IP67 Weather Rating.

(c) IEC 62262 IK10 Impact Rating.

n.

CAMERA TYPE 7 - 4.0 MP Indoor In-Ceiling Mount Camera with 3.3 - 9 mm lens.

1. Basis of Design Product: 4.0C-H5A-DC1, by Avigilon.

2. Performance:

a. Must include Avigilon VAL5 Analytic Suite

b. Image Sensor: 1/2.8 inch progressive scan CMOS.

c. Maximum Resolution:

1) Aspect Ratio: 16:9: 2560 x 1440.

2) Aspect Ratio: 4:3: 2304 x 1728.

d. Imaging Rate:

1) WDR Off: (50 Hz/60 Hz): 25 fps/30 fps.

2) WDR On: (50 Hz/60 Hz): 20 fps/20 fps.

e. Dynamic Range:

1) WDR Off: 83 dB.

2) WDR On: 126 dB.

f. Minimum Illumination:

1) Color: 0.030 lux.

2) Monochrome: 0.015 lux.

g. Field of View:

1) Horizontal angle: 16:9: 34 degrees to 92 degrees.

2) Horizontal angle: 4:3: 34 degrees to 92 degrees.

3) Vertical angle: 16:9: 18 degrees to 50 degrees

4) Vertical angle: 4:3: 25 degrees to 68 degrees

h. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: IEEE 802.3af Class 3 PoE Compliant.

2) AC Power: 24 V +/- 10%, 24 V +/- 10%, 13 VA min for dome

3) DC Power: 12 V +/- 10% 12 V +/- 10%, 12 W min for dome.

4) Battery Backup: 3V manganese lithium.

i. Environmental Standards:

1) Indoor Dome Cameras:

(a) IEC 62262 IK10 Impact Rating.

j.

CAMERA TYPE 8 - 12.0 MP Fisheye Infrared Camera with 1.6 mm lens.

28 21 13 IP CAMERAS - 14

1. Basis of Design Product: 12.0W-H5A-FE-DO1-IR, by Avigilon.

2. Performance:

a. Must include Avigilon VAL5 Analytic Suite

b. Must support native dewarp of camera inside VMS

c. Image Sensor: 1/2.3 inch progressive scan CMOS.

d. Maximum Resolution; Aspect Ratio: 1:1: 3008 x 3008.

e. Imaging Rate:

1) (50 Hz/60 Hz): 25 fps/30 fps.

f. Dynamic Range:

1) WDR Off: Up to 83 dB.

2) WDR On: Up to 120 dB.

g. Minimum Illumination:

1) Color: 0.38 lux.

2) Monochrome: 0.19 lux.

3) IR: 0.0 lux; maximum distance 12 m (39 ft).

h. Field of View: 360 degrees.

i. Operational Range:

1) Temperature: -40 degrees C to 60 degrees C (-40 F to 140 F).

2) IR Max Temperature: Up to 55 degrees C (131 F).

3) IR at 75 percent power: 27 degrees C to 39 degrees C (80 F to 102 F).

4) IR at 40 percent power: 39 degrees C to 55 degrees C (102 F to 131 F).

5) IR Hysteresis: +2 degrees C (3.6 F).

6) Relative Humidity: 0–95 percent (non-condensing).

j. Environmental Standards:

1) IEC 60529 IP66 and IP67 Weather Rating.

2) IEC 62262 IK10 Impact Rating.

k. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: IEEE 802.3af Class 3 PoE Compliant.

2) PoE+: IEEE 802.3at Class 4 PoE Compliant (for IR models).

3) DC Power: 12 V +/- 10%, 11 W minimum.

4) Battery Backup: 3V manganese lithium.

CAMERA TYPE 9 - 8.0 MP Fisheye Infrared Camera with 1.4 mm lens.

1. Basis of Design Product: 8.0C-H5A-FE-DO1-IR, by Avigilon.

2. Performance:

a. Must include Avigilon VAL5 Analytic Suite

b. Must support native dewarp of camera inside VMS

c. Image Sensor: 1/1.8 inch progressive scan CMOS.

d. Maximum Resolution; Aspect Ratio: 1:1: 2048 x 2048.

e. Imaging Rate:

1) (50 Hz/60 Hz): 25 fps/30 fps.

28 21 13 IP CAMERAS - 15

f. Dynamic Range:

1) WDR Off: Up to 83 dB.

2) WDR On: Up to 120 dB.

g. Minimum Illumination:

1) Color: 0.20 lux.

2) Monochrome: 0.10 lux.

3) IR: 0.0 lux; maximum distance 17 m (55 ft).

h. Field of View: 360 degrees.

i. Operational Range:

1) Temperature: -40 degrees C to 60 degrees C (-40 F to 140 F).

2) IR Max Temperature: Up to 55 degrees C (131 F).

3) IR at 75 percent power: 27 degrees C to 39 degrees C (80 F to 102 F).

4) IR at 40 percent power: 39 degrees C to 55 degrees C (102 F to 131 F).

5) IR Hysteresis: +2 degrees C (3.6 F).

6) Relative Humidity: 0–95 percent (non-condensing).

j. Environmental Standards:

1) IEC 60529 IP66 and IP67 Weather Rating.

2) IEC 62262 IK10 Impact Rating.

k. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: IEEE 802.3af Class 3 PoE Compliant.

2) PoE+: IEEE 802.3at Class 4 PoE Compliant (for IR models).

3) DC Power: 12 V +/- 10%, 11 W minimum.

4) Battery Backup: 3V manganese lithium.

CAMERA TYPE 10 - 9MP HD Multisensor Camera; three 3MP sensors, wide dynamic range (WDR) and a 4mm lens:

1. Basis of Design Product: 9C-H4A-3MH-180 – H4 Multisensor, by Avigilon.

2. Performance:

a. Must include Avigilon H4 Analytic Suite

b. Image Sensors: 1/2.8 inch progressive scan CMOS.

c. Aspect Ratio: 4:3.

d. Active Pixels (H x V): 2048 x 1536 per sensor.

e. Imaging Area (H x V): 5.18 mm x 3.89mm (0.204 inches x 0.153 inches).

f. Imaging Rate: 24 fps at 60 Hz and 25 fps at 50Hz.

g. IR Illumination:

1) Color Mode: 0.05 lux (F1.6).

2) Mono Mode 0.01 lux (F1.6).

3) With IR Illuminator Active: 0 lux.

h. Dynamic Range: 100 dB with WDR active.

i. Resolution Scaling: Down to 640 x 480.

j. Angle of View: 72 degrees.

28 21 13 IP CAMERAS - 16

k. Mounting:

1) Indoor Ceiling Mount.

2) Indoor / Outdoor Pendant Mount.

3) Indoor / Outdoor Surface Mount.

l. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: up to IEEE 802.3af Class 3 PoE Compliant.

2) AC Power: 24 V +/- 10%, 10 VA min (13 VA min with -IR option).

3) DC Power: 12 V +/- 10%, 7 W min (9 W min with -IR option).

4) Battery Backup: 3V manganese lithium.

m. Operational Range:

1) Temperature:

(a) Ceiling Mount: -10 degrees C to +50 degrees C [14 F to +122 F].

(b) Pendant and Surface Mount: -40 degrees C to +60 degrees C [-40 F to +140 F].

2) Relative Humidity: 0–95 percent (non-condensing).

n.

CAMERA TYPE 11 - 12MP HD Multisensor Camera; four 3MP sensors, wide dynamic range (WDR) and a 2.8mm lens:

a. Basis of Design Product: 12C-H4A-4MH-360 – H4 Multisensor, by Avigilon.

b. Performance:

1) Must include Avigilon H4 Analytic Suite

2) Sensors: 1/2.8 inch progressive scan CMOS.

3) Aspect Ratio: 4:3.

4) Active Pixels (H x V): 2048 x 1536 per sensor.

5) Imaging Area (H x V): 5.18 mm x 3.89mm (0.204 inches x 0.153 inches).

6) Imaging Rate: 20 fps at 60 Hz and 20 fps at 50Hz.

7) IR Illumination:

(a) Color Mode: 0.025 lux (F1.2).

(b) Mono Mode 0.005 lux (F1.2).

(c) With IR Illuminator Active: 0 lux.

8) Dynamic Range: 100 dB with WDR active.

9) Resolution Scaling: Down to 640 x 480.

10) Angle of View: 103 degrees.

11) Mounting:

(a) Indoor Ceiling Mount.

(b) Indoor / Outdoor Pendant Mount.

(c) Indoor / Outdoor Surface Mount.

c. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: up to IEEE 802.3af Class 3 PoE Compliant.

28 21 13 IP CAMERAS - 17

2) AC Power: 24 V +/- 10%, 10 VA min (13 VA min with -IR option).

3) DC Power: 12 V +/- 10%, 7 W min (9 W min with -IR option).

4) Battery Backup: 3V manganese lithium.

d. Operational Range:

1) Temperature:

(a) Ceiling Mount: -10 degrees C to +50 degrees C [14 F to +122 F].

(b) Pendant and Surface Mount: -40 degrees C to +60 degrees C [-40 F to +140 F].

2) Relative Humidity: 0–95 percent (non-condensing).

e.

CAMERA TYPE 12 - 20MP HD Multisensor Camera; four 5MP sensors, wide dynamic range (WDR) and a 2.8mm lens:

1. Basis of Design Product: 20C-H4A-4MH-360 – H4 Mutlisensor, by Avigilon.

2. Performance:

a. Must include Avigilon H4 Analytic Suite

b. Image Sensors: 1/2.8 inch progressive scan CMOS.

c. Aspect Ratio: 4:3.

d. Active Pixels (H x V): 2592 x 1944 per sensor.

e. Imaging Area (H x V): 5.18 mm x 3.89mm (0.204 inches x 0.153 inches).

f. Imaging Rate: 13 fps at 60 Hz and 13 fps at 50Hz.

g. IR Illumination:

1) Color Mode: 0.025 lux (F1.2).

2) Mono Mode 0.005 lux (F1.2).

3) With IR illuminator Active: 0 lux.

h. Dynamic Range: 100 dB with WDR active.

i. Resolution Scaling: Down to 640 x 480.

j. Angle of View: 103 degrees.

k. Mounting:

1) Indoor Ceiling Mount.

2) Indoor / Outdoor Pendant Mount.

3) Indoor / Outdoor Surface Mount.

l. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: up to IEEE 802.3af Class 3 PoE Compliant.

2) AC Power: 24 V +/- 10%, 10 VA min (13 VA min with -IR option).

3) DC Power: 12 V +/- 10%, 7 W min (9 W min with -IR option).

4) Battery Backup: 3V manganese lithium.

m. Operational Range:

1) Temperature:

(a) Ceiling Mount: -10 degrees C to +50 degrees C [14 F to +122 F].

28 21 13 IP CAMERAS - 18

(b) Pendant and Surface Mount: -40 degrees C to +60 degrees C [-40 F to +140 F].

2) Relative Humidity: 0–95 percent (non-condensing).

n.

CAMERA TYPE 13 - 24MP HD Multisensor Camera: with three 8MP sensors, wide dynamic range (WDR) and a 5.2mm lens:

1. Basis of Design Product: 24C-H4A-3MH-180 – H4 Multisensor, by Avigilon.

2. Performance:

a. Must include Avigilon H4 Analytic Suite

b. Image Sensors: 1/2.5 inch progressive scan CMOS.

c. Aspect Ratio: 16:9.

d. Active Pixels (H x V): 3840 x 2160 per sensor.

e. Imaging Area (H x V): 6.22 mm x 3.50mm (0.245 inches x 0.138 inches).

f. Imaging Rate: 12 fps at 60 Hz and 13 fps at 50Hz.

g. IR Illumination:

1) Color Mode: 0.2 lux (F1.6).

2) Mono Mode 0.04 lux (F1.6).

3) With IR Illuminator: 0 lux.

h. Dynamic Range: 100 dB with WDR active.

i. Resolution Scaling: Down to 768 x 432.

j. Angle of View: 101 degrees.

k. Mounting:

1) Indoor Ceiling Mount.

2) Indoor / Outdoor Pendant Mount.

3) Indoor / Outdoor Surface Mount.

l. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: up to IEEE 802.3af Class 3 PoE Compliant.

2) AC Power: 24 V +/- 10%, 10 VA min (13 VA min with -IR option).

3) DC Power: 12 V +/- 10%, 7 W min (9 W min with -IR option).

4) Battery Backup: 3V manganese lithium.

m. Operational Range:

1) Temperature:

(a) Ceiling Mount: -10 degrees C to +50 degrees C [14 F to +122 F].

(b) Pendant and Surface Mount: -40 degrees C to +60 degrees C [-40 F to +140 F].

2) Relative Humidity: 0–95 percent (non-condensing).

n.

CAMERA TYPE 14 - 24MP HD Multisensor Camera; with three 8MP sensors, wide dynamic range (WDR) and a 4mm lens:

1. Basis of Design Product: 24C-H4A-3MH-270 – H4 Multisensor, by Avigilon.

28 21 13 IP CAMERAS - 19

2. Performance:

a. Must include Avigilon H4 Analytic Suite

b. Image Sensors: 1/2.5 inch progressive scan CMOS.

c. Aspect Ratio: 16:9.

d. Active Pixels (H x V): 3840 x 2160 per sensor.

e. Imaging Area (H x V): 6.22 mm x 3.50mm (0.245 inches x 0.138 inches).

f. Imaging Rate: 12 fps at 60 Hz and 13 fps at 50Hz.

g. IR Illumination:

1) Color Mode: 0.2 lux (F1.6).

2) Mono Mode 0.04 lux (F1.6).

3) With IR Illuminator: 0 lux.

h. Dynamic Range: 100 dB with WDR active.

i. Resolution Scaling: Down to 768 x 432.

j. Angle of View: 101 degrees.

k. Mounting:

1) Indoor Ceiling Mount.

2) Indoor / Outdoor Pendant Mount.

3) Indoor / Outdoor Surface Mount.

l. Electrical Power: Cameras capable of being powered by the following power sources:

1) PoE: up to IEEE 802.3af Class 3 PoE Compliant.

2) AC Power: 24 V +/- 10%, 10 VA min (13 VA min with -IR option).

3) DC Power: 12 V +/- 10%, 7 W min (9 W min with -IR option).

4) Battery Backup: 3V manganese lithium.

m. Operational Range:

1) Temperature:

(a) Ceiling Mount: -10 degrees C to +50 degrees C [14 F to +122 F].

(b) Pendant and Surface Mount: -40 degrees C to +60 degrees C [-40 F to +140 F].

2) Relative Humidity: 0–95 percent (non-condensing).

n.

CAMERA TYPE 15 - 4.0 MP Pan-Tilt-Zoom Camera with 4.4 - 88 mm lens.

1. Basis of Design Product: 4.0C-H5A-PTZ-DP36, by Avigilon.

2. Performance:

a. Must include Avigilon VAL5 Analytic Suite

1) Support in home position for rules.

2) Support for object classification for entire field of view.

b. Image Sensor: 1/2.5 inch progressive scan CMOS.

c. Zoom:

1) Image Stabilization On: 30x maximum.

2) Image Stabilization Off: 36x maximum.

28 21 13 IP CAMERAS - 20

d. Maximum Resolution: 16:9: 2688 x 1512.

e. Imaging Rate: 30 fps maximum.

f. Minimum Illumination:

1) Color: 0.3 lux.

2) Monochrome: 0.09 lux.

g. Field of View:

1) Horizontal angle: 69.7 degrees to 2.2 degrees.

2) Vertical angle: 42.8 degrees to 1.3 degrees.

h. Electrical Power: Cameras capable of being powered by the following power sources:

1) 30 W PoE+: IEEE 802.3at Class 4 PoE+ compliant.

2) 60 W PoE++: IEEE 802.3bt Class 6 PoE++ compliant with power injector.

3) AC Power: 24 V +/- 10%, 51 W maximum.

4) DC Power: 24 V +/- 10%, 51 W maximum.

5) Battery Backup: 3V manganese lithium.

i. Operational Range:

1) Operating Temperature when powered by external power or 60 W PoE:

(a) In-Ceiling Mount: -30 degrees C to 60 degrees C (-22 F to 140 F).

(b) Pendant Mount: -40 degrees C to 60 degrees C (-40 F to 140 F).

2) Operating Temperature when powered by IEEE 802.3at 30 W PoE+:

(a) In-Ceiling Mount: -10 degrees C to 60 degrees C (14 F to 140 F).

(b) Pendant Mount: -10 degrees C to 60 degrees C (14 F to 140 F).

3) Relative Humidity: 0–95 percent (non-condensing).

CAMERA TYPE 16 – 3MP Camera and Video Intercom

1. Basis of Design Product: H4 Video Intercom with 3 MP fisheye camera.

2. Performance:

a. Native Resolution: 2048x1536.

b. Frame Rate: 30fps.

c. Aspect Ratio: 4:3.

d. 1/2.8" Progressive Scan CMOS Mounting Options:

1) Flush Mount with coordinating adapter.

2) Recessed Mount.

e. Operational Range:

1) Temperature: -40 °C to 60 °C (-40 °F to 140 °F).

2) Relative Humidity: 0–95 percent (non-condensing

3. Safety Relay for H4 Video Intercom.

a. Performance:

1) Power Source:

(a) External 12V-24V DC power supply.

(b) PoE: IEEE802.3af Class 3 compliant VDC: 12V +/- 10 percent, 10W min.

28 21 13 IP CAMERAS - 21

2) Outputs: Normally open (NO) and normally closed (NC) relay contacts rated at 2A.

3) Operational Range:

(a) Mounting Location: Relay designed for indoor placement.

(b) Temperature: -40 degrees C to +50 degrees C [-40 F to +122 F].

(c) Relative Humidity: 5–85 percent (non-condensing).

CAMERA TYPE 17 - 2.0 MP Mini Dome Camera.

1. Basis of Design Product: 2.0C-H4M-D1, by Avigilon.

2. Performance:

a. Image Sensor: 1/2.8 inch progressive scan CMOS.

b. Active Pixels (H x V): 1920 x 1080.

c. Imaging Area (H x V): 5.6 mm x 3.1 mm [0.145 inches x 0.118 inches].

d. Imaging Rate: 30 fps.

e. Dynamic Range: 100 dB.

f. Minimum Illumination:

1) Color: 0.01 lux (F/1.2).

2) Monochrome: 0.002 lux (F/1.2).

CAMERA TYPE 18 - 2.0 MP Mini Dome Camera with IR.

1. Basis of Design Product: 2.0C-H4M-D1-IR, by Avigilon.

2. Performance:

a. Image Sensor: 1/2.8 inch progressive scan CMOS.

b. Active Pixels (H x V): 1920 x 1080.

c. Imaging Area (H x V): 5.6 mm x 3.1 mm [0.145 inches x 0.118 inches].

d. Imaging Rate: 30 fps.

e. Dynamic Range: 100 dB.

f. Minimum Illumination:

1) Color: 0.01 lux (F/1.2).

2) Monochrome: 0.002 lux (F/1.2).

g. Minimum Illumination with IR:

1) Color: 0.01 lux (F/1.2).

2) Monochrome: 0.0 lux (F/1.2).

3) IR Illumination: Up to 10 m (32.8 ft).

2.5 ACCESSORIES:

Brackets and Mounts:

1. H4A-MT-NPTA1: Indoor/outdoor pendant NPT mount.

2. H4A-MT-WALL1: Indoor/outdoor pendant wall arm mount.

3. H4-MT-CRNR1: Aluminum corner mounting bracket for pendant dome cameras.

4. H4-MT-CRNR1: Aluminum corner mounting bracket for bullet cameras.

5. H4-MT-POLE1: Aluminum pole mounting bracket for pendant dome cameras.

6. H4-MT-POLE1: Aluminum pole mounting bracket for bullet cameras.

28 21 13 IP CAMERAS - 22

7. CM-MT-WALL1: Pendant wall mount.

8. H4-MT-CRNR1: Corner mounting bracket.

9. H5A-FE-MT-NPTA1: NPT adapter.

10. H5A-FE-DC-CPNL1: Metal ceiling panel, for ceiling reinforcement.

11. PTZMH-DC-CPNL1: Metal Ceiling Panel for In-Ceiling Installation.

Other:

1. CM-AC-GROM1 : Pipe grommets.

2. H4A-AC-GROM1: Camera sealing grommets.

3. H4A-DD-SDWL1: Indoor dome camera sidewall knockout plugs.

4. H4A-DD-SDWL1-BL: Black indoor dome camera sidewall knockout plugs.

5. H4-BO-JBOX1: Junction box for bullet cameras.

6. H4-DC-CPNL1: Metal ceiling panel.

7. POE-INJ-BT-60W-NA: Gigabit 802.3bt 60W PoE Injector, single port.

8. POE-INJ2-PLUS-NA: 30W PoE+ Injector. Injector operational temperature range is

-20ºC (-4ºF) to 40ºC (104ºF). NA/EU/UK/AU options available.

9. PTZ-ACCS-IC-RETRO: H4 In-Ceiling PTZ camera audio cable retrofit kit.

10. H5PTZ-ACCS-CABL1: Cable gland nut kit, pack of 10.

PART 3 EXECUTION

3.1 EXAMINATION

Verification of Conditions: Do not begin installation until substrates have been properly prepared.

Evaluation and Assessment: If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

Surface Preparation: Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

Install all products in this section following the product manufacturer’s published installation and application manuals and guidelines.

3.4 SYSTEM STARTUP

Test equipment and configure system in accordance with instructions provided by the manufacturer prior to installation.

28 21 13 IP CAMERAS - 23

Review configurable features of the device with the Owner’s Representative and establish a punch list for standard, device specific, location specific and VMA/NVR specific configuration of device(s).

1. Program and configure devices in accordance with this punch list so no additional programming is required for operation by the user.

Configure equipment requiring users to log on using a password with user/site-specific credentials. Default passwords are not acceptable and must be configured prior to project closeout.

Provide products with the latest and most up-to-date firmware by the manufacturer or provide firmware of a version specified by the provider of the Video Management Application (VMA) or Network Video Recorder (NVR).

3.5 ADJUSTING

Fine Tuning: Perform field software changes after initial programming session to “fine tune” operating parameters and sequence of operations based on any revisions to Owner’s operating requirements.

3.6 CLOSEOUT

Demonstration:

1. Demonstrate administration and operation of devices described by this section.

2. Demonstrate how to authorize users and applications to operate and configure installed devices.

3. Demonstrate how an authorized user can gain access to and make changes to configuration.

4. Demonstrate how to operate functionality configured for this project as defined by configuration punch list.

License Assignment:

1. Register software, hardware, firmware, operational or administrative licenses necessary for to operate or administer devices to Owner.

2. Deliver to Owner’s Representative proof of license registration from product manufacturer.

Device Configuration Backup:

1. Using manufacturer’s backup software tool or VMA/NVR, perform a full system back-up at completion of initial programming.

2. Deliver configuration backup files, restoration application and instructions detailing for restoration of back-up configuration.

END OF SECTION