S02 D.3 - Network Video Recorders Requirements.pdf

693-21-107 Install Camera System Wilkes-Barre VA Medical Center

NETWORK VIDEO RECORDERS

28 05 19.15-1

SECTION 28 05 19.15

PART 1 GENERAL

1.1 SECTION INCLUDES

Network Video Recorders for Surveillance Systems.

1.2 RELATED SECTIONS

Section 28 21 13 - IP Cameras.

Section 28 23 00 - Video Management System Interfaces.

1.3 ADMINISTRATIVE REQUIREMENTS

Coordination:

1. Coordinate with Owner or Owner’s representative regarding network configuration and estimated throughput utilization prior to performing network connections.

Sequencing / Scheduling: Provide to Owner or Owner’s representative a schedule and list of participants required to attend coordination and progress update meetings.

1. Owner representative(s) for Facilities Management, Information Technology (IT)

Services, and Security Management.

1.4 INFORMATIONAL SUBMITTALS

Product Data: Manufacturer's product information and data sheets for each product specified in this section, including:

1. Substrate preparation instructions and recommendations

2. Installation means and methods.

3. Recommendations and requirements for proper storage and handling.

Shop Drawings:

1. Submit Manufacturer’s approved shop drawings detailing the section and elevation views of each product to be installed.

2. Coordinate with locations listed on Contract Drawings.

Warranty Information:

1. Submit confirmation and details of manufacturer’s warranty, extended warranty, and replacement policies.

1.5 CLOSEOUT SUBMITTALS

28 05 19.15-2

Supply licensing and registration information for all software, hardware, firmware, operational, and administrative licenses.

Supply network configuration backup files, restoration application and instructions.

1.6 QUALITY ASSURANCE

Qualifications:

1. Manufacturer: Minimum of 5 years in business.

2. Installers:

a. Performs Network Video Recorder (NVR) installation, configuration, setup, programming and related work employing authorized integrators/electronic technicians certified by manufacturer.

b. Certification for authorized integrators/electronic technicians shall include, at a minimum, installation and service of equipment provided.

1.7 WARRANTY

Manufacturer Warranty: Provide manufacturer’s warranty covering parts and labor costs to repair or replace part that fail to perform.

1. Warranty Period: Parts and labor warranty for 5 years from date of Substantial

Completion or date of purchase, whichever comes first.

2. Service During Warranty: Provide direct support to Owner via phone and email, including access to training and education in the form of documents, videos and other materials via the internet and next business day onsite parts and delivery service.

PART 2 PRODUCTS

2.1 MANUFACTURERS

Basis of Design Manufacturer: Avigilon.

1. Address: 1717 McKinney Avenue, Suite 1590, Dallas, TX 75202

2. Phone: (888) 281-5182.

3. Website: www.avigilon.com.

Substitution Limitations:

1. Submit substitution requests in accordance with provisions herein.

2. Single manufacturer will provide, from a single source, a fully integrated surveillance system consisting of network video recorders and the following components:

a. IP Video Cameras.

b. Video Management System Interfaces.

c. Video Surveillance Positioning Equipment.

d. Video Surveillance Sensors.

28 05 19.15-3

2.2 NETWORK VIDEO RECORDERS

Basis of Design Product: Avigilon NVR4x Premium.

Throughput: NVR system must be capable of managing a combined 2100 Mbps of total throughput with handling for simultaneous recording, playback and live streaming.

1. Recording: 1500 Mbps.

2. Playback: 600 Mbps.

Search Capacity: Provide products capable of supporting the following:

1. Events search such as motion, digital input, classified object, arbitrary events and tampering across all feature enabled cameras connected to the system.

2. Object similarity search up to 200 cameras simultaneously. When combined with facial recognition the system must be capable of supporting up to 100 cameras using object similarity and up to 50 cameras using facial recognition features.

System Certifications:

1. UL and cUL certification marks for Canada/USA.

2. NRCS certification mark for USA.

3. Electromagnetic Emissions Certifications:

a. CFR Title 47, FCC Part 2, 15 Class A.

b. ICES-003 Class A.

c. EN 55032 Class A.

d. EN 61000-3-2.

e. EN 61000-3-3.

4. Electromagnetic Immunity Standards:

a. EN 55024.

5. Safety Standards:

a. UL/CSA/IEC/EN 60950-1.

System Design:

1. Operating System: Microsoft Windows Server 2016.

2. Processor: Intel Xeon.

3. RAM: 32GB DDR4.

4. Video Output: VGA.

Operating System Storage: Two (2) M.2 SSD drives configured with subsequent write capability, data mirroring, and redundancy, such that one (1) drive may be removed, replaced, or fail without system compromise (RAID 1).

Video Data Storage Capacity: Provide system with the following configurations:

1. Default Effective Storage Capacity: 128 TB.

2. Maximum Drive Count: Maximum twelve (12) 3.5 inch drives.

3. Maximum Data Capacity: 180 TB raw (157 TB effective).

28 05 19.15-4

4. Data Storage Virtualization: Provide drive array capable of subsequent read and write, with data mirroring, and redundancy, such that up to two (2) drives may be removed, replaced, or fail without system compromise (RAID 6).

Mounting: Standard server enclosure (rack) mounting, requiring no greater than a 2U configuration.

Network: Provide system with the following configuration:

1. Two (2) 10Gb Ethernet SFP+ ports and six (6) 1Gb Ethernet RJ-45 ports (1000Base-T).

Remote Access: Provide hardware-integrated support for remote access control.

1. Basis of Design: iDRAC 9 Enterprise by Dell Technologies, Inc.

Electrical Power:

1. Input: 100 to 240 V AC, 50/60 Hz, auto-switching.

2. Supply: Appliance must be configurable for dual power supplies that may be replaced without the need to power down (hot-swappable).

3. Power Consumption:

a. Maximum: 750W.

b. Average: 333W.

Operating Range:

1. Temperature: 10 to 35 degrees C (50F to 95F).

2. Relative Humidity: 10–80 percent (non-condensing).

3. Altitude: 3048 meters (10,000 ft).

4. Vibration: 0.26 Grms at 5 Hz to 350 Hz.

5. Shock: One pulse on each side of the system of 71 G for up to 2 ms.

2.3 ACCESSORIES

Power Supplies:

1. NVR4X-1100W-2NDDPS: Redundant, hot-swappable power supply for NVR4X PRM

192/217TB.

2. NVR4X-750W-2NDDPS: Redundant, hot-swappable power supply for NVR4X PRM

64/96/128/157TB.

Connectivity:

1. HD-NVR4-SFPPLUS-DA: SFP+ 10GbE Twinax Direct Attach Cable 3m.

2. NVR4X-SFPPLUS-SR: SFP+ 10GBASE-short range transceiver.

3. AVA-HED1-NVR4X-PRM1-CONNECT: Avigilon Video Archive Connectivity kit for

NVR4X PRM 64/96/128/157TB.

4. AVA-HED1-NVR4X-PRM2-CONNECT: Avigilon Video Archive Connectivity kit for

NVR4X PRM 192/217TB

Warranty Upgrades:

28 05 19.15-5

1. NVR4X-PRM1-WARR-5Y4HMC: 4 hour mission critical response service-level agreement upgrade for NVR4X PRM 64/96/128/157TB.

2. NVR4X-PRM2-WARR-5Y4HMC: 4 hour mission critical response service-level agreement upgrade for NVR4X PRM 192/217TB.

Hardware:

1. NVR4X-PRM-2NDCPU: 2nd CPU Kit for NVR4X PRM.

Hard Drives:

1. NVR4-HDDS-INT-16TB: Spare hard drive, 16TB, internal bay, for NVR4X PRM

192/217TB.

2. NVR4-HDDS-HOT-16TB: Spare hard drive, 16TB, front or rear bay, for NVR4X PRM

128/157/192/217TB.

3. NVR4-HDDS-HOT-12TB: Spare hard drive, 12TB, front or rear bay, for NVR4X PRM

96TB.

4. NVR4-HDDS-HOT-8TB: Spare hard drive, 8TB, front or rear bay, for NVR4X PRM 64TB.

PART 3 EXECUTION

3.1 EXAMINATION

Verification of Conditions: Do not begin installation until substrates have been properly prepared.

Evaluation and Assessment: If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

Surface Preparation: Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

Install all products in this section following the product manufacturer’s published installation and application manuals and guidelines.

3.4 SYSTEM STARTUP

Test equipment and configure system in accordance with instructions provided by the manufacturer prior to installation.

Configure equipment requiring users to log on using a password with user/site-specific credentials. Default passwords are not acceptable and must be configured prior to project closeout.

28 05 19.15-6

Provide products with the latest and most up-to-date firmware by the manufacturer or provide firmware of a version specified by the provider of the Video Management Application (VMA) or Network Video Recorder (NVR).

3.5 ADJUSTING

Fine Tuning: Perform field software changes after initial programming session to “fine tune” operating parameters and sequence of operations based on any revisions to Owner’s operating requirements.

3.6 CLOSEOUT

Demonstration:

1. Demonstrate administration and operation of devices described by this section.

2. Demonstrate how to authorize users and applications to operate and configure installed devices.

3. Demonstrate how an authorized user can gain access to and make changes to configuration.

4. Demonstrate how to operate functionality configured for this project as defined by configuration punch list.

END OF SECTION