RFQ FA442726Q1065 - Voltage Divider.pdf

SOLICITATION NOTICE

28 May 2026

MEMORANDUM FOR ALL PROSPECTIVE OFFERORS

FROM: 60TH CONTRACTING SQUADRON

350 HANGAR AVE, BLDG. 549

TRAVIS AFB, CA 94535-2632

SUBJECT: Request for quotation (RFQ), FA442726Q1065, FLUKE Corp 720A Kelvin Varley Voltage Divider, Travis AFB

Point of Contact:

Contract Specialist SSgt Edward Kim edward.kim.7@us.af.mil Contracting Officer Vitaliy Kim Vitaliy.kim.1@us.af.mil Contracting Office Address 60th Contracting Squadron (60 CONS)

350 Hangar Avenue, Bldg 549, Travis AFB, CA, 94535

Date, Time, and Submission of Offer:

Posted Date: 28 May 2026 RFQ Response Deadline: 11 June 2026 12:00 PM PDT. Offers of offer revisions received after the solicitation close date/time will not be accepted unless requested by the CO.

Submission Method Offers must be submitted electronically via email to both Point of Contacts

Questions (If needed) All questions concerning this solicitation must be submitted to the Point of Contacts no later than 3 June 2026 at 4:30 PM PDT. Any inquiry submitted past this deadline will not be accepted.

1. Solicitation notice.

a. This is a Solicitation notice for a Request for Quotation (RFQ).

2. Set-Asides: (IAW RFO 5.101(c)(2)) If applicable select one

a. Anticipated Set-Aside Strategy: This requirement is being procured under Full and Open Competition

3. Codes for Services or Supplies (IAW RFO 5.101(c)(3))

a. Product Service Code (PSC): 6625 - Electrical and Electronic Properties Measuring and Testing Instruments

b. NAICS Code: 334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals mailto:edward.kim.7@us.af.mil mailto:Vitaliy.kim.1@us.af.mil

4. Description (IAW RFO 5.101(c)(4))

a. Clear and Concise Description of Supplies or Services:

The contractor shall provide the requirement under a Firm Fixed Priced contract in accordance with (IAW) attached Statement of Work (SOW). The following contains the Contract Line Item Numbers (CLIN) items to be acquired. A list of line-item number(s) and items, quantities, and units of measure.

Vendor Information

Business Name:__________________________________________________________ Address: _______________________________________________________________ CAGE Code: ____________________________________________________________ SAM UEI: __________________ SAM Registration Expiration Date: ______________

Socioeconomic Status (Check all that apply):

( ) Small Business ( ) SDB ( ) HUBZone ( ) Woman-Owned SB ( ) SDVOSB ( ) 8(a) ( ) EDWOSB ( ) Other – Please State:

Point of Contact Name/Phone Number: _______________________________________ Point of Contact Email: ____________________________________________________

CLIN SUPPLIES/SERVICES REQUESTED QTY U/I Unit Price Extended Amount

Brand: FLUKE Corp PN: 720A Kelvin Varley Voltage Divider with MIL-STD-130UID, M130 Label with UID

1 LOT $ $

TOTAL COST (USD): $

QUOTE EXPIRATION DATE:

PROPOSED WARRANTY (IF APPLICABLE):

Statement of Work (SOW): The 60th Maintenance Squadron (60 MXS) Test, Measurement, and Diagnostic Equipment (TMDE) Flight requires the procurement of one (1) new FLUKE Corp PN:

720A, Kelvin Varley Voltage Divider. This item is an authorized and mandatory asset on the Command Authority/Command Responsibility Listing (CA/CRL) R14 for the Precision Measurement Equipment Laboratory (PMEL) shop.

Please see attachment #5 for more details.

b. The provision at RFO 52.212-1, Instructions to Offeror – Commercial Products and Commercial Services (Sep 2023) applies to this solicitation. In addition, the following addendums identified below applies.

(1) Addendum to RFO 52.212-1(a) Submission of offers.

(a) The Offeror shall complete the Vendor Information and Pricing section under paragraph 4.a. of this solicitation.

(b) The Offeror shall complete and submit the Contractor Responsibility Verification form (Attachment #2), along with supporting documentations required by the form.

(c) The Offeror shall submit a Technical Capability Statement that strongly supports the contractor’s ability to satisfy the contract requirements IAW the SOW. The information submitted must be sufficient for the Government to assess if your capability will successfully satisfy the requirements of SOW.

(d) The contractor’s offer must meet the minimum requirements of the solicitation.

Unless requested from the Contracting Officer, quote revisions received after the solicitation close date/time will not be accepted. Responses should contain your best terms and conditions.

The government reserves the right to evaluate the quotes and award without interchanges.

(e) The government will not accept any refurbished equipment; all equipment provided must be new.

(f) Addendum to RFO 52.212-1(b) Period for Acceptance of Offers. The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

c. The provision at 52.212-2 Evaluation—Commercial Products and Commercial Services (Nov 2021) applies to this solicitation. In addition, the following addendums identified below applies.

(1) The addendum to RFO 52.212-2, Evaluation - Commercial Products and Commercial Services (Date) as provided below applies to this acquisition.

(2) The Government will award a contract to the responsible offeror whose offer conforming to the solicitation will provide the best value to the Government. The best value for the Government is an offer that has a fair and reasonable price, an offeror with a satisfactory or above past performance, and an offer that meets or exceeds the technical requirements of the SOW. The Government will review offers from the lowest priced offeror to the highest priced offeror. The Government, in its best interests, reserves the right to consider a quotation other than the lowest price technically acceptable whose offer provides additional benefit(s). Once the Government has determined the best value offer, the Government is under no obligation to evaluate further offers.

(3) The following factors shall be used to evaluate offers:

(a) Price – The Government will evaluate if the offeror’s total proposed price is fair and reasonable. A comparison of proposed prices received in response to the solicitation is the preferred and intended price analysis technique. If adequate price competition is not feasible, the government reserves the right to perform price comparison from the result of the government's market research and/or any other reasonable basis as determined by the government.

(b) Past Performance – The Government reserves the right to review contractor’s past performance derogatory information. The review includes but is not limited to verifying if any previous Federal Contracts performed by the offeror have been rated in the Contractor Performance Assessment Reporting System (CPARS) and checking SAM.gov. Additionally, the Government reserves the right to use the CO’s knowledge of the contractor’s past performance.

Acceptable Unacceptable

The offeror's past performance on recent (within the last three (3) years from the date of the solicitation) and relevant contracts previously performed by the contractor have been consistently rated satisfactory or above, and/or does not have any concerning past performance deficiencies.

The offeror's past performance on recent (within the last three (3) years from the date of the solicitation) and relevant contracts previously performed by the contractor have consistently received ratings below satisfactory, and/or have received concerning past performance deficiencies.

(c) Technical Evaluation – The Government will review the contractor’s Technical Capability Statement and evaluate if it will successfully satisfy the requirements of PWS. The rating table provided below will be used to evaluate Technical Capability.

Acceptable Unacceptable

The offeror’s technical capability statement provided sufficient information regarding their ability to successfully fulfill the requirement of the PWS.

The offeror’s technical capability statement did not provide sufficient information regarding their ability to successfully fulfill the requirement of the SOW.

(4) Quotes will be evaluated from the lowest to the highest. The lowest offer with Acceptable Past Performance and Acceptable Technical approach will represent the best value and the evaluation will stop. The government reserves the right to award without discussion.

(5) A written notice of award or acceptance of an offer shall be furnished to the successful offeror. The resultant award shall therefore be binding without further action by either party unless the Contracting Officer requests a written confirmation or signature from the contractor.

Anticipated Award Date: On or about 30 June 2026

d. Trade Agreements Language: Not Applicable

e. Technical Data: Not Applicable

f. Construction Contract Information: Not Applicable.

g. Statement Regarding Responsible Sources: All responsible sources may submit a quotation, bid, or proposal, as appropriate, which will be considered by the agency.

h. Competitive Status: This is a competitive action.

1501115840A Highlight

i. Qualification Requirement: Voltage Divider must be FLUKE Corp brand. PN: 720A Kelvin Varley voltage divider.

j. Specifications, technical data, and other pertinent information: Not Applicable.

j. Brand name specifications: This solicitation is for a brand only requirement.

k. See Attachment #1 for a list of solicitation provisions and contract clauses that apply to the acquisition. (IAW (see 12.205(a)) and 12.205(b))

ATTACHMENTS

1. Solicitation Provisions and Contract Clauses by Reference

2. Contractor Responsibility Verification

3. TAFB Security Requirements

4. Statement of Work (SOW)

5. Brand Name Justification - Redacted