RFQ.docx

COMBINED SYNOPSIS/SOLICITATION RFQ 36C24823Q1502

Description This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services. This announcement constitutes the only solicitation for this action. Quotes are being requested, and a written solicitation will not be issued.

This solicitation is issued as a Request for Quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2024-05, effective 5/22/2024.

This solicitation is 100% set-aside to SDVOSB. The North American Industrial Classification System (NAICS) code for this procurement is 811310, Educational Support Services, with a small business size standard of $12.5 million.

The Network Contracting Office 8-RPO East intends to award a fixed priced contract, providing Kitchen Hood Cleaning and Maintenance for Bay Pines VA Health Care System (BPVAHCS) in accordance with the embedded Statement of Work (SOW) and Price Schedule.

This solicitation will use Comparative Evaluation. The award will be made to the offeror determined to be acceptable, price reasonable, and is determined to provide the best value to the government. All eligible offerors may submit quotes.

Responses shall be on all or none basis, no partial submissions will be accepted. Quote must be valid for 90 days. All offerors must be registered in System for Award Management (SAM) at https://www.sam.gov at time offers are due to be considered for an award of a federal contract. Registration must be complete and not missing elements such as representations and certifications. Also, if you are a Service-Disabled Veteran Owned Business (SDVOSB) or Veteran-Owned Small Business (VOSB) please be sure to be registered in Veteran Small Business Certification (VetCert) at Veteran Small Business Certification (sba.gov).

Submission of your response shall be received not later than Sep 9,2024, 3:00PM EST. at angel.garay@va.gov. Reference RFQ 36C24824Q01502, Kitchen Hood Inspection and Cleaning.

Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f).

Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Point of Contact listed below. All questions must be submitted no later than August 30, 2024.

*Vendors are required to follow the “Instructions to Quoters” in the RFQ, page 67-69.

Point of Contact:

Contracting Officer Name: Angel Garay Organization: NCO-8 Email: angel.garay@va.gov.

Schedule of Services Kitchen Hood Cleaning and Maintenance These services shall be on site at the C. W. Bill Young VAMC, Bay Pines, FL in accordance with the terms and conditions herein. Contractors shall quote prices for all the Contract Line- Item Numbers.

B.1 PRICE/COST SCHEDULE

ITEM INFORMATION

ITEM INFORMATION

INSPECT AND CLEAN GRILL HOOD IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN PIZZA OVEN HOOD IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 100 PER NFPA 96 2017 EDITION

LOCAL STOCK NUMBER: 975

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 100 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 102 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 101 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 111 PER NFPA 96 2017 EDITION

LOCAL STOCK NUMBER: 1275

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 46 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 46 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN GRILL HOOD IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN PIZZA OVEN HOOD IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 100 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 100 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 102 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 101 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 111 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 46 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 46 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN GRILL HOOD IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN PIZZA OVEN HOOD IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 100 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 100 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 102 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 101 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 111 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 46 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 46 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN GRILL HOOD IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN PIZZA OVEN HOOD IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 100 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 100 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 102 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 101 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 111 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 46 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 46 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN GRILL HOOD IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN PIZZA OVEN HOOD IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 1 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 100 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 100 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 102 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 101 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD IN BLD 111 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #1 IN BLD 46 PER NFPA 96 2017 EDITION

INSPECT AND CLEAN KITCHEN HOOD #2 IN BLD 46 PER NFPA 96 2017 EDITION

STATEMENT OF WORK

Inspection and Maintenance of Kitchen Hoods Provide all parts, labor, materials, supervision, special services, and equipment required performing cleaning of kitchen hoods, ductwork, exhaust systems, and other areas per the requirements of NFPA 96 at the CW Bill Young VAMC located at 10000 Bay Pines Blvd, Bay Pines, FL 33744.

Period of Performance:

Inspection and Cleaning Contractor shall conduct all inspection and cleaning in accordance with the requirements of the NFPA 96, 2017 edition.

Inspection and cleaning shall include the following:

· Contractor shall inspect, clean, and degrease kitchen exhaust hoods plus all ductwork and stainless-steel filters including roof fans by removing the fan/blower hood grease filters and completely cleaning by scraping, wiping, etc.

· All associated ductwork with the kitchen hoods is to be cleaned.

· Contactor shall clean the entire duct including, but not limited to, the interior hood, interior hood to the exterior fan/blower and the fan blower.

· Contractor shall clean reinstalled filters. If filters are damage to the point as to a replacement is needed Contractor will contact the COR with pricing.

· Disassembly, cleaning, and degreasing hoods, including hood filter tracts, grease troughs, and removable grease cups.

· Removal of roof and/or wall mounted fans from ductwork to degrease the base, shroud, and blades.

· Inspecting exhaust fans for loose or worn-out fan belts.

· Cleaning and degreasing all hood filters, hood parts and accessories, and replacing if necessary.

· Cleaning all parts of ductwork from exhaust fans to each individual hood

· Applying food-safe polish to stainless steel ductwork.

· Thoroughly cleaning all surrounding areas as a result of the cleaning (remove plastic, mop, remove any debris, etc.)

· Providing a complete, detailed written report of all work performed, and deficiencies in the exhaust system, and recommendations for addressing any problems. Reports shall be provided within (5) business days of the completion of the work.

· Attaching a certificate showing company name, person performing the work, and date of cleaning to each hood cleaned.

Deliverables Service Plan: Vendors shall include a complete description of the products and services offered in their Proposal. The Service Plan shall include, at a minimum:

· A summary of the products or services to be provided.

· A timeline showing how the Contractor plans to deliver products and/or services to fulfill any contract issued as a result of this RFP.

· Key staff members at the Contractors organization that will be assigned to the account or will otherwise be part of an implementation team.

· Any resource requirements on the part of the medical center necessary in order for the Contractor to meet its obligations under an agreement resulting from this RFP.

Service Reports: Vendor to report any necessary mechanical or structural repairs upon visual inspection of areas cleaned. Vendor to provide report of cleaning and photos before and after with each report. Providing a complete, detailed written report of all work performed, and deficiencies in the exhaust system, and recommendations for addressing any problems. Reports shall be provided within (5) business days of the completion of the work.

Location Certification: Attached to each hood location, a certificate showing company name, person performing the work, and date of cleaning to each hood cleaned.

Credentials All work will be in accordance with the International Kitchen Exhaust Cleaners Association (IKECA) and the National Fire Protection Association (NFPA). All projects to be managed by an IKECA “Certified Exhaust Cleaning Specialist” (CECS).

Waste All waste that is generated during your cleaning project will be disposed of on-site. Cleaning includes canopies, vertical and horizontal ducts and risers, roof top exhausts and baffles.

Inventory and Frequency The frequency of cleaning for each hood shall be conducted as outlined below. Quarterly cleanings shall be done during the first month of each quarter (October, January, April, and July).

Warning Signs & Protective Barriers: It shall be the responsibility of the contractor to place signs and/or protective barriers in all directions to warn others in the area of performing work when work could cause possible harm to those who are unaware of such work. Barriers shall be placed to protect surrounding persons, property, equipment, etc.

Scheduling: Contractor shall notify the Contracting Officer’s Representative (COR) at least one (1) week in advance of the scheduled date(s) to perform the cleaning via e-mail and phone call. All cleaning shall be done after 4PM in Buildings 1 and 46 and after 7PM in Buildings 100, 102, 101, and 111.

Local Contact: All contact for purposes of scheduling, repairs, and cleanings shall be done through the Contracting Officer’s Representative:

Name: Leon Cobarris Number: 727-398-6661 ext. 15172 or cell 727-295-9134 E-mail: Leon.Cobarris@va.gov

RECORDS MANAGEMENT OBLIGATIONS

A. Applicability This clause applies to all Contractors whose employees create, work with, or otherwise handle Federal records, as defined in Section B, regardless of the medium in which the record exists.

B. Definitions “Federal record” as defined in 44 U.S.C. § 3301, includes all recorded information, regardless of form or characteristics, made or received by a Federal agency under Federal law or in connection with the transaction of public business and preserved or appropriate for preservation by that agency or its legitimate successor as evidence of the organization, functions, policies, decisions, procedures, operations, or other activities of the United States Government or because of the informational value of data in them.

The term Federal record:

1. includes Bay Pines VA Healthcare System records.

2. does not include personal materials.

3. applies to records created, received, or maintained by Contractors pursuant to their Bay Pines VA Healthcare System contract.

4. may include deliverables and documentation associated with deliverables.

C. Requirements

1. Contractor shall comply with all applicable records management laws and regulations, as well as National Archives and Records Administration (NARA) records policies, including but not limited to the Federal Records Act (44 U.S.C. chs. 21, 29, 31, 33), NARA regulations at 36 CFR Chapter XII Subchapter B, and those policies associated with the safeguarding of records covered by the Privacy Act of 1974 (5 U.S.C. 552a). These policies include the preservation of all records, regardless of form or characteristics, mode of transmission, or state of completion.

2. In accordance with 36 CFR 1222.32, all data created for Government use and delivered to, or falling under the legal control of, the Government are Federal records subject to the provisions of 44 U.S.C. chapters 21, 29, 31, and 33, the Freedom of Information Act (FOIA) (5 U.S.C. 552), as amended, and the Privacy Act of 1974 (5 U.S.C. 552a), as amended and must be managed and scheduled for disposition only as permitted by statute or regulation.

3. In accordance with 36 CFR 1222.32, Contractor shall maintain all records created for Government use or created in the course of performing the contract and/or delivered to, or under the legal control of the Government and must be managed in accordance with Federal law. Electronic records and associated metadata must be accompanied by sufficient technical documentation to permit understanding and use of the records and data.

4. Bay Pines VA Healthcare System and its contractors are responsible for preventing the alienation or unauthorized destruction of records, including all forms of mutilation. Records may not be removed from the legal custody of Bay Pines VA Healthcare System or destroyed except for in accordance with the provisions of the agency records schedules and with the written concurrence of the Head of the Contracting Activity. Willful and unlawful destruction, damage or alienation of Federal records is subject to the fines and penalties imposed by 18 U.S.C. 2701. In the event of any unlawful or accidental removal, defacing, alteration, or destruction of records, Contractor must report to Bay Pines VA Healthcare System. The agency must report promptly to NARA in accordance with 36 CFR 1230.

5. The Contractor shall immediately notify the appropriate Contracting Officer upon discovery of any inadvertent or unauthorized disclosures of information, data, documentary materials, records or equipment. Disclosure of non-public information is limited to authorized personnel with a need-to-know as described in the contract. The Contractor shall ensure that the appropriate personnel, administrative, technical, and physical safeguards are established to ensure the security and confidentiality of this information, data, documentary material, records and/or equipment is properly protected. The Contractor shall not remove material from Government facilities or systems, or facilities or systems operated or maintained on the Government’s behalf, without the express written permission of the Head of the Contracting Activity. When information, data, documentary material, records and/or equipment is no longer required, it shall be returned to Bay Pines VA Healthcare System control or the Contractor must hold it until otherwise directed. Items returned to the Government shall be hand carried, mailed, emailed, or securely electronically transmitted to the Contracting Officer or address prescribed in the contract. Destruction of records is EXPRESSLY PROHIBITED unless in accordance with Paragraph (4).

6. The Contractor is required to obtain the Contracting Officer's approval prior to engaging in any contractual relationship (sub-contractor) in support of this contract requiring the disclosure of information, documentary material and/or records generated under, or relating to, contracts. The Contractor (and any sub-contractor) is required to abide by Government and Bay Pines VA Healthcare System guidance for protecting sensitive, proprietary information, classified, and controlled unclassified information.

7. The Contractor shall only use Government IT equipment for purposes specifically tied to or authorized by the contract and in accordance with Bay Pines VA Healthcare System policy.

8. The Contractor shall not create or maintain any records containing any non-public Bay Pines VA Healthcare System information that are not specifically tied to or authorized by the contract.

9. The Contractor shall not retain, use, sell, or disseminate copies of any deliverable that contains information covered by the Privacy Act of 1974 or that which is generally protected from public disclosure by an exemption to the Freedom of Information Act.

10. The Bay Pines VA Healthcare System owns the rights to all data and records produced as part of this contract. All deliverables under the contract are the property of the U.S. Government for which Bay Pines VA Healthcare System shall have unlimited rights to use, dispose of, or disclose such data contained therein as it determines to be in the public interest. Any Contractor rights in the data or deliverables must be identified as required by FAR 52.227-11 through FAR 52.227-20.

11. Training. All Contractor employees assigned to this contract who create, work with, or otherwise handle records are required to take [Agency]-provided records management training. The Contractor is responsible for confirming training has been completed according to agency policies, including initial training and any annual or refresher training.

[Note: To the extent an agency requires contractors to complete records management training, the agency must provide the training to the contractor.] D. Flowdown of requirements to subcontractors

1. The Contractor shall incorporate the substance of this clause, its terms and requirements including this paragraph, in all subcontracts under this [contract vehicle], and require written subcontractor acknowledgment of same.

2. Violation by a subcontractor of any provision set forth in this clause will be attributed to the Contractor.

SECTION C - CONTRACT CLAUSES

C.1 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2023)

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights—

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at Federal Acquisition Regulation (FAR) 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g) Invoice.

(1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include—

(i) Name and address of the Contractor;

(ii) Invoice date and number;

(iii) Contract number, line item number and, if applicable, the order number;

(iv) Description, quantity, unit of measure, unit price and extended price of the items delivered;

(v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi) Terms of any discount for prompt payment offered;

(vii) Name and address of official to whom payment is to be sent;

(viii) Name, title, and phone number of person to notify in event of defective invoice; and

(ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x) Electronic funds transfer (EFT) banking information.

(A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer—System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award Management), or applicable agency procedures.

(C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

(2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315.

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment.—

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR part 1315.

(3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable; and

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if—

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on—

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures prescribed in FAR 32.608-2 in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon:

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract.

(r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity.

(s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services.

(2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause;

(3) The clause at 52.212-5.

(4) Addenda to this solicitation or contract, including any license agreements for computer software.

(5) Solicitation provisions if this is a solicitation.

(6) Other paragraphs of this clause.

(7) The Standard Form 1449.

(8) Other documents, exhibits, and attachments

(9) The specification.

(t) [Reserved]

(u) Unauthorized Obligations.

(1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern:

(i) Any such clause is unenforceable against the Government.

(ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an “I agree” click box or other comparable mechanism (e.g., “click-wrap” or “browse-wrap” agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.

(2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(v) Incorporation by reference. The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of Clause) ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES Clauses that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The following clauses are incorporated into 52.212-4 as an addendum to this contract:

C.2 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 30 days.

(End of Clause)

C.3 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed five (5) years.

(End of Clause)

C.4 VAAR 852.211-72 TECHNICAL INDUSTRY STANDARDS (NOV 2018)

(a) The Contractor shall conform to the standards established by: as to .

(b) The Contractor shall submit proof of conformance to the standard. This proof may be a label or seal affixed to the equipment or supplies, warranting that the item(s) have been tested in accordance with the standards and meet the contract requirement. Proof may also be furnished by the organization listed above certifying that the item(s) furnished have been tested in accordance with and conform to the specified standards.

(c) Offerors may obtain the standards cited in this provision by submitting a request, including the solicitation number, title and number of the publication to:

(d) The offeror shall contact the Contracting Officer if response is not received within two weeks of the request.

(End of Clause) C.5 VAAR 852.219-73 VA NOTICE OF TOTAL SET-ASIDE FOR CERTIFIED SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESSES (JAN 2023) (DEVIATION)

(a) Definition. for the Department of Veterans Affairs, ‘‘Service-disabled Veteran-owned small business concern or SDVOSB’’:

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled Veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled Veterans or eligible surviving spouses (see VAAR 802.201, Surviving Spouse definition);

(ii) The management and daily business operations of which are controlled by one or more service-disabled Veterans (or eligible surviving spouses) or, in the case of a service-disabled Veteran with permanent and severe disability, the spouse or permanent caregiver of such Veteran;

(iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document;

(iv) The business has been certified for ownership and control pursuant to 38 U.S.C. 8127, 13 CFR 128, and is listed as certified in the SBA certification database at https://veterans.certify.sba.gov/; and

(v) The business agrees to comply with VAAR subpart 819.70 and Small Business Administration (SBA) regulations regarding small business size, government contracting, and the Veteran Small Business Certification Program at 13 CFR parts 121, 125, and 128.

(2) The term ‘‘Service-disabled Veteran’’ means a Veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

(3) The term ‘‘small business concern’’ has the meaning given that term under section 3 of the Small Business Act (15 U.S.C. 632).

(4) The term ‘‘small business concern owned and controlled by Veterans with service-connected disabilities’’ has the meaning given the term ‘‘small business concern owned and controlled by service-disabled veterans’’ under section 3(q)(2) of the Small Business Act (15 U.S.C. 632(q)(2)).

(5) The term “SDVOSB participant” or certified SDVOSB means a small business that has been certified in the SBA Veteran Small Business Certification Program and listed in the SBA certification database (see 13 CFR 128.102).

(b) General. In order for a concern to submit an offer and be eligible for the award of an SDVOSB set-aside or sole source contract, the concern must qualify as a small business concern under the size standard corresponding to the NAICS code assigned to the contract and be listed as an SDVOSB participant in the SBA certification database as set forth in 13 CFR 128.

(1) Offers received from entities that are not certified SDVOSBs and listed in the SBA certification database at the time of offer shall not be considered.

(2) Any award resulting from this solicitation shall be made to a certified SDVOSB listed in the SBA certification database who is eligible at the time of submission of offer(s) and at the time of award.

(3) The requirements in this clause apply to any contract, order or subcontract where the firm receives a benefit or preference from its designation as an SDVOSB, including set-asides, sole source awards, and evaluation preferences.

(c) Representation. Pursuant to 38 U.S.C. 8127(e), only certified SDVOSBs listed in the SBA certification database are considered eligible to receive award of a resulting contract. By submitting an offer, the prospective contractor represents that it is an eligible and certified SDVOSB as defined in this clause, 13 CFR 121, 125, and 128, and VAAR subpart 819.70.

(d) Agreement/LOS certification. When awarded a contract action, including orders under multipleaward contracts, an SDVOSB agrees that in the performance of the contract, the SDVOSB shall comply with requirements in VAAR subpart 819.70 and SBA regulations on small business size, and government contracting programs at 13 CFR part 121 and part 125, including the non-manufacturer rule and limitations on subcontracting (LOS) requirements in 13 CFR 121.406(b) and 13 CFR 125.6. For the purpose of limitations on subcontracting, only certified SDVOSBs listed in the SBA certification database (including independent contractors) shall be considered eligible and/or ‘‘similarly situated’’ (i.e., a firm that has the same small business program status as the prime contractor). An otherwise eligible firm further agrees to comply with the required LOS certification requirements in this solicitation (see 852.219–75 or 852.219–76 as applicable). These requirements are summarized as follows:

(1) Services. In the case of a contract for services (except construction), the SDVOSB prime contractor will not pay more than 50% of the amount paid by the government to the prime for contract performance to firms that are not certified SDVOSBs listed in the SBA certification database (excluding direct costs to the extent they are not the principal purpose of the acquisition and the SDVOSB/ VOSB does not provide the service, such as airline travel, cloud computing services, or mass media purchases). When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract.

(2) Supplies/products.

(i) In the case of a contract for supplies or products (other than from a non-manufacturer of such supplies), the SDVOSB prime contractor will not pay more than 50% of the amount paid by the government to the prime for contract performance, excluding the cost of materials, to firms that are not certified SDVOSBs listed in the SBA certification database. When a contract includes both supply and services, the 50 percent limitation shall apply only to the supply portion of the contract.

(ii) In the case of a contract for supplies from a non-manufacturer, the SDVOSB prime contractor will supply the product of a domestic small business manufacturer or processor, unless a waiver as described in 13 CFR 121.406(b)(5) has been granted. Refer to 13 CFR 125.6(a)(2)(ii) for guidance pertaining to multiple item procurements.

(3) General construction. In the case of a contract for general construction, the SDVOSB prime contractor will not pay more than 85% of the amount paid by the government to the prime for contract performance, excluding the cost of materials, to firms that are not certified SDVOSBs listed in the SBA certification database.

(4) Special trade construction contractors. In the case of a contract for special trade contractors, no more than 75% of the amount paid by the government to the prime for contract performance, excluding the cost of materials, may be paid to firms that are not certified SDVOSBs listed in the SBA certification database.

(5) Subcontracting. An SDVOSB subcontractor must meet the NAICS size standard assigned by the prime contractor and be certified and listed in the SBA certification database to count as similarly situated. Any work that a first tier SDVOSB subcontractor further subcontracts will count towards the percent of subcontract amount that cannot be exceeded. For supply or construction contracts, the cost of materials is excluded and not considered to be subcontracted. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the portion of the contract with the preponderance of the expenditure upon which the assigned NAICS is based. For information and more specific requirements, refer to 13 CFR 125.6.

(e) Required limitations on subcontracting compliance measurement period. An SDVOSB shall comply with the limitations on subcontracting as follows:

[] By the end of the base term of the contract or order, and then by the end of each subsequent option period; or [] By the end of the performance period for each order issued under the contract.

(f) Joint ventures. A joint venture may be considered eligible as an SDVOSB if the joint venture complies with the requirements in 13 CFR 128.402 and the managing joint venture partner makes the representations under paragraph (c) of this clause. A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (d) of this clause will be performed by the aggregate of the joint venture participants.

(g) Precedence. The VA Veterans First Contracting Program, as defined in VAAR 802.101, subpart 819.70, and this clause, takes precedence over any inconsistencies between the requirements of the SBA Veteran Small Business Certification Program and the VA Veterans First Contracting Program.

(h) Misrepresentation. Pursuant to 38 U.S.C. 8127(g), any business concern, including all its principals, that is determined by VA to have willfully and intentionally misrepresented a company’s SDVOSB status is subject to debarment from contracting with the Department for a period of not less than five years (see VAAR 809.406–2 Causes for Debarment).

(End of Clause) C.6 VAAR 852.219-75 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING—CERTIFICATE OF COMPLIANCE FOR SERVICES AND CONSTRUCTION (JAN 2023) (DEVIATION)

(a) Pursuant to 38 U.S.C. 8127(l)(2), the offeror certifies that—

(1) If awarded a contract (see FAR 2.101 definition), it will comply with the limitations on subcontracting requirement as provided in the solicitation and the resultant contract, as follows:

(i) [X] Services. In the case of a contract for services (except construction), the contractor will not pay more than 50% of the amount paid by the government to it to firms that are not certified SDVOSBs listed in the SBA certification database as set forth in 852.219–73 or certified VOSBs listed in the SBA certification database as set forth in 852.219–74. Any work that a similarly situated certified SDVOSB/VOSB subcontractor further subcontracts will count towards the 50% subcontract amount that cannot be exceeded. Other direct costs may be excluded to the extent they are not the principal purpose of the acquisition and small business concerns do not provide the service as set forth in 13 CFR 125.6.

(ii) [] General construction. In the case of a contract for general construction, the contractor will not pay more than 85% of the amount paid by the government to it to firms that are not certified SDVOSBs listed in the SBA certification database as set forth in 852.219–73 or certified VOSBs listed in the SBA certification database as set forth in 852.219–74. Any work that a similarly situated certified SDVOSB/VOSB subcontractor further subcontracts will count towards the 85% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted.

(iii) [] Special trade construction contractors. In the case of a contract for special trade contractors, the contractor will not pay more than 75% of the amount…