RFQ Attachment 2_Technical Matrix Pipe Bending.docx
DOCX document 2 MB Posted
- Attached to
- AFLCMC Pipe Bending Machine
- Solicitation number
- 47QSWC25Q0190
- Issued by
-
GSA Federal Acquisition Service
About this file
This document is a Request for Quote (RFQ) Attachment detailing technical specifications for a Pipe Bending Machine for the United States Air Force Life Cycle Material Command (AFLCMC). The RFQ requires a manual, floor-mounted hydraulic machine with specific technical requirements, including a 1.5-inch OD capacity, 8-inch maximum center line radius, 195-degree maximum bend arm movement, and a machine footprint of 12 ft(L) x 40 in(W) x 40 in(H), weighing approximately 900 lbs. The machine must also include comprehensive tooling such as 20 mandrels, 6 mandrel rods, 9 clamp blocks, 9 side blocks, a mandrel extractor system, angle bend indicator assembly, hydraulic system, and wrench set. The solicitation is a small business set-aside, firm-fixed price contract, and requires two hard copies and one electronic copy of technical data, with a 365-day After Receipt of Order (ARO) delivery timeline.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RFQ_Attachment 2_Technical Matrix Pipe Bending Machine
The required characteristics are listed in the first column. Vendors shall insert their offered characteristics in the second column along with specifying whether quoter meets, does not meet or exceeds the required characteristic and identify in the third column where in the descriptive literature/reference material those characteristics are shown as evidence of meeting the required specification. This is for the Pipe Bending Machine.
This chart shall be completed by the QUOTER. All entries to this chart shall be typed. The chart will be used to evaluate your offer to determine the acceptability Pass/Fail of the Pipe Bending. Attached product descriptive literature (see Clause 52.214-21, Descriptive Literature, for additional information).
MINIMUM SPECIFICATIONS/CHARACTERISTIC
NOTE: (!!! CHANGING ANY INFORMATION IN THIS COLUMN WILL INVALIDATE YOUR OFFER!!!!!)
| QUOTER'S SPECIFICATION/CHARACTERISTIC (Specify if quoter meets, does not meet or exceeds required specification. If indicating “does not meet” or “exceeds requirement”, provide details as to how it lacks or exceeds requirement. |
| QUOTER'S DESCRIPTIVE LITERATURE REFERENCE |
(QUOTER shall provide page and paragraph in descriptive literature/reference material as evidence of required specification.)
Government Evaluation Pass/Fail (Provide details as to why Pass or Fail)
Note: Quoters leave blank
Manual bending machine
Floor mounted
Hydraulic foot operated manual extractor
Capacity 1.5 in OD
Center line radius 8 in max
Maximum bend arm movement 195°
Maximum over-mandrel tube length 10 ft
Machine floor space 12 ft(L) X 40 in(W) X 40 in (H)
Weight 900 lb.
MINIMUM SPECIFICATIONS/CHARACTERISTIC
NOTE: (!!! CHANGING ANY INFORMATION IN THIS COLUMN WILL INVALIDATE YOUR OFFER!!!!!)
| QUOTER'S SPECIFICATION/CHARACTERISTIC (Specify if quoter meets, does not meet or exceeds required specification. If indicating “does not meet” or “exceeds requirement”, provide details as to how it lacks or exceeds requirement. |
| QUOTER'S DESCRIPTIVE LITERATURE REFERENCE |
(QUOTER shall provide page and paragraph in descriptive literature/reference material as evidence of required specification.)
Government Evaluation Pass/Fail (Provide details as to why Pass or Fail)
Note: Quoters leave blank
Tooling:
· 20 mandrels 0.375 to 1.5 in
· 6 mandrel rods
· 9 clamp blocks 0.375 to 1.5 in
· 9 side blocks 0.375 to 1.5 in
· Mandel extractor system
· Angle bend indicator assembly
· Hydraulic system
· Wrench set
Two (2) hard copies and one (1) electronic copy of technical data shall be provided with the machine.
After Receipt of Order (ARO) 365 Days
File details come from the government source that posted it. Updated .