47QSWC25Q0190 Amendment 001 Pipe Bending Machine.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

1 1

2. AMENDMENT/MODIFICATION NO.

AMENDMENT 001

3. EFFECTIVE DATE

SEE BLOCK 16C.

4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (IF APPLICABLE)

6. Issued By Code 7. ADMINISTERED BY (If other than Item 6) Code

GSA/FAS FEDERAL ACQUISITION

SERVICE, General Supply & Services (GSS), Assisted Contracting Branch B

819 TAYLOR ST

FORT WORTH, TX 76102

8. Name and Address of Contractor (No., street, county, State and ZIP Code (x) 9A. AMENDMENT OF SOLICITATION NO.

RFQ# 47QSWC25Q0190

X 9B. DATED (SEE ITEM 11)

September 30, 2025

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

is not extended. X The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of is extended

Offers Offer's must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning ___1____copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or

(c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

(3) A. THIS CHANGE ORDER IS ISSUED PURSUANT TO : (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF :

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF :

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, X is required to sign this document and return _1__ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The above numbered solicitation is amended as follows:

1. The purpose of this Amendment is to revise the Request for Quotation (RFQ) 47QSWC25Q0190 based on Questions and Answers.

The Questions and Answers attached are to be incorporated into the Request for Quotation. Quoters must sign and return a copy of Amendment 001, which acknowledges receipt and accepts the changes to this procurement.

All other terms and conditions remain unchanged.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

DANIEL HERRERA, CONTRACTING OFFICER

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

________________________________________ BY ______________________________________________

(Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV. 10-83)

PREVIOUS EDITION UNUSABLE Prescribed by GSA, FAR (48 CFR) 53.243

RFQ47QSWC25Q0190 Pipe Bending Machine General Questions and Answers

1. Could you please confirm the inner wall dimension of the pipe that will be used? Will it be 1.5 inches or larger? Additionally, could you clarify what size and type of material will be required for this application?

Materials include 5052 and 6061 aluminum; 304/321 stainless steel; Inconel 625/718; commercially pure and titanium alloys.

Tube – up to 1.5-inch outer diameter; wall thickness 0.065 inch Pipe – 1-inch IPS Schedule 40

2. Will the fabrication process require the use of a mandrel bending machine, or will a standard pipe bending method be acceptable?

This is for a manual mandrel-type rotary-draw bending machine.

3. Does the pipe bending machine need to be stationary, or should it be on wheels? I haven’t found this detail specified in the contract, and I want to ensure accuracy when pricing the item.

Stationary, floor mounted.

4. Does the machine need to be a specific name brand, or will any brand that meets the technical requirements be acceptable?

Any brand that meets the Technical Requirements.

5. RFQ is asking for FOB destination, please advise shipping address?

Delivery locations were included in spreadsheet submitted. Please advise if they were not listed.

6. Please confirm who is responsible for offloading the machine once the item arrives at the final destination.

The Base receiving Dock will offload at their Location.

7. Please clarify which specific tooling you will need with the 420 Bender.

See attached. List is for reference only.

8. Please confirm if this RFQ is Inspect at Origin or Destination.

Origin.

9. Please confirm who is responsible for offloading the machine from the truck. Delivery is door to dock.

The Base receiving Dock will offload at their Location.

10. Please confirm if this item requires an IUID tag.

Tentatively, yes.