Amendment Number 2 follow on pages.pdf
PDF 249 KB Posted
- Attached to
- High Gain Antenna System (HGAS) Jitter Damper for the Wide Field Infrared Survey Telescope (WFIRST) Project
- Solicitation number
- RFP-80GSFC20R0027
About this file
This document provides an amendment to a request for proposals for a High Gain Antenna System Jitter Damper. The amendment revises instructions for proposal submission and format. Offerors must submit proposals electronically using NASA's secure Large File Transfer system by requesting an invitation with specified contacts by four days before the proposal due date and submitting all files by the due date listed in the RFP. Proposals must follow a four volume structure for Offer, Mission Suitability, Price, and Past Performance, with page limits and formatting requirements provided for each section. The Mission Suitability volume is limited to 50 pages not including several specified attachments. The amendment replaces provisions for proposal preparation instructions and proposal delivery methods.
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RFP 80GSFC20R0027
Amendment Number 2
A. Provision L.8, GSFC 52.215-201 PROPOSAL PREPARATION—GENERAL
INSTRUCTIONS, is replaced in its entirety as follows:
It is NASA's intent, by providing the instructions set forth below, to solicit information that will demonstrate the Offeror's competence to successfully complete the requirements specified in the
Statement of Work (SOW), Attachment A. Generally, the proposal should:
Demonstrate understanding of the overall and specific requirements of the proposed contract.
Convey the company's capabilities for transforming understanding into accomplishment.
Present in detail, the plans and methods for so doing.
Present the costs associated with so doing.
In the event that other organizations are proposed as being involved in conducting this work, their relationships during the effort shall be explained and their proposed contributions shall be identified and integrated into each part of the proposal, as appropriate.
(a) PROPOSAL FORMAT AND ORGANIZATION
(1) Offerors shall submit proposals in four volumes as specified below:
Volume Title
I Offer Volume
II Mission Suitability Volume
III Price Volume
IV Past Performance Volume
(2) All pages of Volumes I, II, III, and IV shall be numbered and identified with the
Offeror’s name, RFP number and date. Subsequent revisions, if requested, shall be similarly identified to show revision number and date. A table of contents shall be provided with figures and tables listed separately.
(3) An electronic copy of the Offeror’s (Prime and proposed Significant Subcontractors) proposal, shall be submitted in Microsoft Office Word (compatible with Word 2010) or
Adobe Portable Document Format (PDF) (compatible with version X). Offerors shall submit all Price Volume exhibits in Microsoft Office Excel format (compatible with Excel 2010) and the exhibits shall contain all formulas. Instructions for converting from PDF format to
Excel can be found in the Price Volume Instructions provision. DO NOT password protect any portion of your electronic submission.
(4) The format for each proposal volume shall parallel, to the greatest extent possible, the format of the evaluation factors and subfactors contained in Section L of this solicitation. The proposal content shall provide a basis for evaluation against the requirements of the solicitation. Each volume of the proposal shall specify the relevant evaluation criteria being addressed, if appropriate. The proposal shall include a matrix showing where in the proposal the technical requirements of the SOW, DILS, MAR, and the evaluation criteria of this RFP are satisfied (i.e. SOW element versus Offeror's proposal page numbers). It is intended that this be a simple matrix that should in no way inhibit an innovative approach or burden the Offeror. This proposal matrix is excluded from the page limitations contained in paragraph (b)(1) below.
(5) Information shall be precise, factual, detailed and complete. Offerors shall not assume that the evaluation team is aware of company abilities, capabilities, plans, facilities, organization or any other pertinent fact that is important to accomplishment of the work as specified in the SOW. The evaluation will be based primarily on the information presented in the written proposal. The proposal shall specifically address each listed evaluation factor and subfactor.
(b) PROPOSAL CONTENT AND PAGE LIMITATIONS
(1) The following table contains the page limitations for each portion of the proposal submitted in response to this solicitation. Additional instructions for each component of the proposal are located in the solicitation provision noted under the Reference heading.
Proposal Component Volume Reference Page
Limitations
Offer Volume I L.9 None
Mission Suitability Volume II L.11 50 Pages
Cover Page, Indices, SOW, DILS, and MAR
Compliance Matrices, Time-Phased Activity and Milestone Schedule, and Master
Equipment List (MEL)
Excluded
Draft Quality Assurance Plan (QAP) Excluded
Price Volume III L.12 None
Past Performance Volume IV L.13 Mixed
(a) Information from the Offeror 25 Pages**
(b) Cover Page, Indices, Customer Evaluations, Termination/Descope information, and List of
Acronyms
Excluded
*Prime Offeror individually and each Significant Subcontractor individually.
**Prime Offeror and all Significant Subcontractors (page limitation is for the total component (Prime and Significant Subcontractors)).
(2) When page limitations apply to a volume or specific section, a page is defined as one side of a sheet, 8-1/2" x 11", with at least one inch margins on all sides, using not smaller than 12 point type Times New Roman font. Line spacing or the amount of vertical space between lines of text shall not be less than single line (Microsoft Office Word’s default line spacing). Character spacing shall be “Normal”, not “Expanded” or “Condensed.” The margins may contain headers and footers, but shall not contain any proposal content to be evaluated. Electronic foldout pages count as an equivalent number of 8-1/2" x 11" pages.
The metric standard format most closely approximating the described standard 8-1/2" x 11" size may also be used. The Offeror’s Excel exhibits shall be formatted using 9-12 point type
Arial font.
Diagrams, tables, artwork, and photographs may be reduced and, if necessary, run landscape to eliminate oversize pages. Text in Diagrams, schedules, charts, tables, artwork, and photographs shall be no smaller than 10 point. Diagrams, tables, artwork, and photographs shall not be used to circumvent the text size limitations of the proposal.
(3) Title pages, tabs, and tables of contents are excluded from the page counts specified in paragraph (1) of this provision (as well as other documents specified in table (b)(1) above).
In addition, the Price Volume of your proposal is not page limited except for the page limit for the Basis of Estimate (BOE) section specified in table (b)(1) above. However, this volume is to be strictly limited to cost and price information. Information that can be construed as belonging in one of the other volumes of the proposal will be so construed and counted against that volume's page limitation.
(4) The Government intends to evaluate proposals and award contract(s) without discussions with Offerors (except clarifications as described in FAR 15.306(a)). Therefore, the Offeror's initial proposal should contain the Offeror's best terms from a cost or price and technical standpoint. The Government reserves the right to conduct discussions if the Contracting
Officer later determines them to be necessary. If discussions are held and final proposal revisions are requested, the Government will specify separate page limitations in its request for that submission.
(5) Pages submitted in excess of the limitations specified in this provision will not be evaluated by the Government and will be returned to the Offeror in accordance with NFS
1815.204-70(b).
(End of provision)
B. Provision L.10, GSFC 52.215-205 PROPOSAL DELIVERY, is replaced in its entirety as follows:
The Offeror shall submit their proposal via NASA’s secure Large File Transfer (LFT). Electronic submissions shall not contain hidden formulas, tables, be locked, be protected or contain links to data not included in the electronic copy. All electronic submissions must be searchable and shall not contain scanned documents. It is the Offeror’s responsibility to ensure documents are free from virus and malware, as documents determined by NASA to contain a virus or malware will not be opened or evaluated. Significant Subcontractors for the Cost Volume and/or Past
Performance Volume may submit their required proposal information separately using the instructions in this provision.
Offerors interested in submitting a proposal in response to this RFP shall request a LFT invitation email from Julie Janus at the following email address: Julie.A.Janus@nasa.gov.
Offerors must courtesy copy (cc) Pauline Barrett at Sislyn.P.Barrett@nasa.gov to ensure requests are accommodated timely. All Offerors must submit their request for an LFT invitation to the aforementioned emails, no later than 4 calendar days prior to the proposal due date. The
Government anticipates responding with an invitation to use LFT no later than 2 calendar days prior to the proposal due date.
Upon receipt of the invitation email, an offeror’s representative must click the link in the email to access the LFT website and register for an account. Email invitations with LFT links expire in
168 hours. The offeror’s representative will create his/her own password. The LFT website contains an LFT Quick Start Guide and an LFT User Guide with additional instructions. It is the
Offeror’s responsibility to follow instructions provided in the LFT Quick Start Guide and the
LFT User Guide. After logging into LFT, the Offeror should click the Send File tab to enter the recipient’s email address of Julie.A.Janus@nasa.gov and a cc copy to
Sislyn.P.Barrett@nasa.gov, compose a message to the recipient, and attach files. In the “Subject” block of the “Send File” tab state “IET/HGAS Jitter Damper Proposal - Insert Company Name”.
Note: LFT sessions expire after 15 minutes of inactivity. Offerors are advised that notifications alerting users the session is about to expire will not be provided by the LFT system, and any changes to the email form on the Send File tab will not be saved if the session times out. If an
Offeror wishes to send a file over 2GB, an Accellion applet will need to be download. Files can be sent up to 100 GB in total size.
Offerors are responsible for ensuring their proposal reaches the Government office designated in the solicitation by the time specified in the solicitation. Immediately after all files have been transferred and the proposal has been submitted in its entirety, the offeror shall email the
Contracting Officer with a listing of all documents that were submitted via LFT. Failure to submit a complete electronic proposal by the due date and time specified in the RFP will result in the proposal being considered late and will be handled in accordance with FAR 15.208(b).
The Government is not responsible for any failure attributable to the transmission or receipt of documents submitted using electronic means, including the missing of any established deadlines.
Please note that uploading documents via LFT and the transmission of the files from the Offeror to the Government may not be instantaneous. Offerors are cautioned to allow for sufficient time to ensure timely proposal delivery before the submission deadline. To ensure successful delivery, Offerors are encouraged to submit proposals at least 24 hours prior to the time specified in the solicitation.
(End of provision)
C. All other terms and conditions remain unchanged.
-- END OF AMENDMENT NUMBER 2 --
mailto:Julie.A.Janus@nasa.gov mailto:Sislyn.P.Barrett@nasa.gov mailto:Julie.A.Janus@nasa.gov mailto:Sislyn.P.Barrett@nasa.gov
File details come from the government source that posted it. Updated .