PROCUREMENT DIVISION

TO: All Prospective Bidders

FROM: Marissa Zara, Procurement Specialist, Princeton Plasma Physics Laboratory (PPPL)

DATE: June 12, 2026

SUBJECT: Notice of Request for Proposal (RFP) 260022804 – PACS and VASS Hardware and Software Maintenance Support Services

Dear Prospective Bidder, The Princeton Plasma Physics Laboratory (PPPL), managed and operated by Princeton University for the U.S. Department of Energy (DOE), invites your firm to submit a formal proposal for Physical Access Control Systems (PACS) and Video Assessment and Surveillance Systems (VASS) Hardware and Software Maintenance Support Services.

PPPL seeks to establish a contract with a factory-certified security systems integrator capable of delivering scheduled preventative maintenance, software lifecycle administration, and rapid-response emergency troubleshooting. The resulting contract is anticipated to feature a one-year base period with four subsequent one-year renewal options.

Please review the enclosed RFP requirements, technical questionnaires, evaluation criteria, and pricing structures thoroughly. All submissions must be received electronically no later than July 14, 2026 at 4:00 PM EST. Late submittals or incomplete proposal structures will be disqualified automatically without evaluation.

Thank you for your interest in supporting PPPL's mission.

Sincerely, Marissa Zara Procurement Specialist Princeton Plasma Physics Laboratory Email: mzara@pppl.gov | Phone: 609-243-2397

REQUEST FOR PROPOSAL

(THIS IS NOT AN ORDER)

RFP NO. 260002284

TO: Interested Parties

RFP ISSUE DATE: 06/12/2026

SUBMIT QUOTE BY:

Mandatory Site Walk-Through: To Be Determined (TBD)

Deadline for Technical Questions: June 18, 2026 at 4:00 PM EST

PPPL Official Response to Questions: June 24, 2026

RFP Closing Date & Time: July 14, 2026 at 4:00 PM EST

Submission Format: One (1) combined PDF file Page Limitation: Maximum of twenty-five (25) pages (excluding certificates)

COMPLETE ALL ITEMS AND FORWARD QUOTE TO THE ATTENTION OF THE RFP CONTACT VIA REGULAR OR EXPRESS MAIL AT THE APPLICABLE ADDRESS SHOWN BELOW. QUOTES MAY BE FAXED OR EMAILED TO THE RFP CONTACT BY THE DEADLINE IN LIEU OF A HARD COPY.

RFP CONTACT:

MARISSA ZARA, PROCUREMENT SPECIALIST | EMAIL: MZARA@PPPL.GOV

SCHEDULE

ITEM

NO. SUPPLIES/SERVICES

Princeton Plasma Physics Laboratory, “PPPL”, requires a comprehensive, high-availability hardware and software maintenance support contract. This Request for Proposal (RFP) seeks proposals from qualified, factory-certified security systems integrators. The selected service provider will ensure continuous operational readiness, regulatory compliance, and rapid emergency troubleshooting for PPPL’s integrated electronic physical security platforms.

[ ] SEE SCHEDULE ON FOLLOWING PAGE TOTAL QUOTED AMOUNT

(See Section 14 for Pricing Proposal Breakdown)

PPPL REQUESTS THE FOLLOWING TERMS: SUPPLIER QUOTES THE FOLLOWING TERMS:

FOB: On-site Work FOB: On-site Work

FREIGHT: Materials - Prepaid and Included FREIGHT: Materials - Prepaid and Included

PAYMENT TERMS: NET 30 Other than Small Business; NET 15 Small Business

PAYMENT TERMS: NET 30 Other than Small Business;

NET 15 Small Business

QUOTES SHALL REMAIN FIRM FOR 90 DAYS AFTER THE RFP DEADLINE QUOTES SHALL REMAIN FIRM FOR 90 DAYS AFTER THE RFP DEADLINE

TERMS AND CONDITIONS: THE PPPL TERMS & CONDITIONS FOR COMMERCIAL ITEMS (ATTACHED) SHALL APPLY TO ANY ORDER RESULTING FROM THIS

RFP. SUPPLIER [ ] WILL [ ] WILL NOT ACCEPT AN ORDER BASED ON THESE TERMS AND CONDITIONS. IF “WILL NOT” IS CHECKED, SUPPLIER SHALL PROVIDE

ALTERNATE TERMS AND CONDITIONS, NOTE EXCEPTIONS IN QUOTE, OR PROVIDE APPLICABLE GSA CONTRACT IN SPACE PROVIDED BELOW.

GSA CONTRACT: SUPPLIER’S QUOTE IS BASED ON THE GSA CONTRACT NO. __________________________. PRICES QUOTED ARE NET OF GSA DISCOUNTS

AND THE TERMS AND CONDITIONS OF THIS GSA CONTRACT WILL APPLY IN LIEU OF PPPL’S TERMS AND CONDITIONS IF SUPPLIER IS AWARDED AN ORDER.

[ ] SMALL BUSINESS SET-ASIDE: WHEN CHECKED, SUPPLIERS ARE NOTIFIED THAT THIS RFP IS SET-ASIDE FOR SMALL BUSINESS. QUOTES ARE BEING

SOLICITED ONLY FROM SMALL BUSINESS CONCERNS AND PPPL INTENDS TO MAKE AWARD RESULTING FROM THIS RFP TO A SMALL BUSINESS CONCERN. QUOTES

RECEIVED FROM FIRMS THAT ARE NOT SMALL BUSINESS CONCERNS SHALL BE CONSIDERED NONRESPONSIVE AND WILL BE REJECTED.

SMALL BUSINESS PROGRAM REPRESENTATIONS: BASED ON NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE 561620

AND RELATED SIZE STANDARD OF $22.0M SUPPLIER REPRESENTS THAT IT IS (CHECK ALL THAT APPLY):

SMALL BUSINESS HUBZONE CERTIFIED SMALL BUSINESS LARGE BUSINESS

SMALL DISADVANTAGED BUSINESS VETERAN OWNED SMALL BUSINESS NON-PROFIT ORGANIZATION

WOMAN OWNED SMALL BUSINESS 8A CERTIFIED SMALL BUSINESS FOREIGN SUPPLIER

[X ] WHEN CHECKED, A PPPL REPRESENTATIONS AND CERTIFICATIONS FORM IS PROVIDED WITH THIS RFP. QUOTERS ARE INSTRUCTED TO COMPLETE

AND SUBMIT THAT FORM WITH THEIR QUOTE IN LIEU OF COMPLETING THE ABOVE.

PRICE DISCOUNTS: PRINCETON UNIVERSITY IS AN ACCREDITED INSTITUTION OF HIGHER LEARNING IN THE STATE OF NEW JERSEY AND MANAGES AND OPERATES PPPL

UNDER PRIME CONTRACT DE-AC02-09CH11466 WITH THE US DEPARTMENT OF ENERGY. BASED ON THIS DUAL STATUS, PPPL MAY QUALIFY FOR ACADEMIC AND/OR FEDERAL

GOVERNMENT PRICES/DISCOUNTS. SUPPLIER SHALL QUOTE BASED ON THE MOST FAVORABLE DISCOUNT PROGRAM AVAILABLE TO PPPL. THE UNDERSIGNED HEREBY CERTIFIES

THAT THE QUOTED PRICES ARE NOT IN EXCESS OF PRICES CHARGED TO ANY OTHER SIMILAR CUSTOMER FOR SAME OR SIMILAR ITEMS/QUANTITIES.

1. INTRODUCTION AND SCOPE

The service provider shall provide all management, supervision, labor, factory-certified technicians, materials, tools, equipment, and documentation necessary to perform scheduled preventative maintenance, emergency corrective maintenance, software lifecycle management, and active software subscription/license renewals.

Mandatory Compliance: All operations, installations, testing, and maintenance activities must be performed in strict accordance with the attached Statement of Work (SOW) for PACS and VASS, Rev 0, issued February 2026, Attachment #16.1

Covered Software Platforms & Integrations

• RS2 AccessIT (Access Control Software)

• HID PIV Class (High-Assurance Identity/Credential Validation)

• Avigilon (Video Management Software / VASS)

• Easy Lobby (Visitor Management System)

Covered Field Infrastructure & Hardware

• Access Control Devices: Card readers, high-assurance PIV readers, Request to Exit (REX) components, door monitoring controllers, interface panels, lock power supplies, and backup batteries.

• Video Surveillance Infrastructure: Video recording servers, network switches, network storage arrays, indoor/outdoor cameras, PTZ units, and specialized environmental enclosures.

• Server & Workstation Infrastructure: Access control servers, database management systems, security workstations, and monitoring consoles.

2. PERFORMANCE LOCATION AND SERVICE HOURS

All physical infrastructure services must be performed on-site at the following location:

Princeton Plasma Physics Laboratory 100 Stellarator Road Princeton, NJ 08540

Due to rapid response requirements, the contractor must maintain an operational office or dispatch center within a 100-mile radius of the facility.

Service Level Agreements (SLAs) & Hours

• Standard Non-Emergency Hours: Monday through Friday, 8:00 AM to 5:00 PM EST (excluding PPPL recognized holidays).

• Non-Emergency Dispatch SLA: On-site technician arrival within twenty-four (24) hours of notice during standard hours.

• Emergency Dispatch SLA: Mandatory 24/7/365 on-site technician arrival within four (4) hours of notification.

3. CONTRACT TERMS AND OPTION PERIODS

The contract structure is designed to secure long-term system stability and performance. Total Contract Value (TCV) evaluations will encompass the full 5-year outlook:

• Anticipated Base Award Date: July 20, 2026

• Option Year 1: July 20, 2027 – July 19, 2028

• Option Year 2: July 20, 2028 – July 19, 2029

• Option Year 3: July 20, 2029 – July 19, 2030

• Option Year 4: July 20, 2030 – July 19, 2031

• Total Potential Contract Duration: Five (5) years max, executed via annual renewals based on funding and performance.

4. SITE ACCESS & SECURITY CLEARANCE REQUIREMENTS

PPPL is a highly secured U.S. Department of Energy (DOE) National Laboratory. All contractor personnel must strictly satisfy the following site-access mandates before starting any work:

• Identity Verification: All field personnel must present a valid, unexpired REAL ID compliant credential or passport to gain gate entry.

• Citizenship & Backgrounds: Non-U.S. citizens require advanced administrative review and approval from the PPPL Foreign National Access Program (FNAP).

• General Employee Training (GET): Any contractor technician performing more than forty (40) total hours of on-site service under the Agreement must successfully complete the mandatory PPPL GET course prior to unescorted badge issuance.

• Escort Requirements: Uncertified or untrained technicians will be denied site access or must be escorted by cleared personnel at the contractor's sole expense.

5. ES&H SAFETY PRIORITY

PPPL’s Environment, Safety, and Health (ES&H) is a paramount priority at PPPL. In alignment with the security and risk mandates specified in the February 2026 Statement of Work (SOW), all on-site work must follow a zero-incident framework.

6. SERVICE CONTRACT ACT (SCA) WAGE DETERMINATION

This procurement is strictly subject to the Service Contract Act (SCA) under federal rules.

• SCA Compliance: All field labor categories utilized under this contract must be paid in strict accordance with the applicable SF98 Service Contract Act Wage Determination for Middlesex County, New Jersey.

• Wage Requirements: Bidders are legally required to review the active federal wage determination tables and ensure their proposed fully burdened labor rates meet or exceed the mandated minimum health, welfare, and hourly wage thresholds.

6. CERTIFICATE OF INSURANCE REQUIREMENTS (COI)

Prior to contract award and the commencement of any on-site activities, the selected vendor must submit a valid Certificate of Insurance (COI). This file must meet all specifications set forth in Sections T4a and T4e of PPPL-PD-T (Provisions for Work on PPPL Site), Attachment #16.5

• Section T4a (General Liability & Worker's Compensation): Bidders must prove statutory workers' compensation limits and comprehensive commercial general liability caps.

• Section T4e (Specialized Cyber & Automotive Liability): Coverage must explicitly encompass garage/automotive use on federal property, alongside technological/cyber liability matching the risk profile of physical access control databases.

• PPPL and Princeton University must be named as additional insured parties.

7. INVOICE & PAYMENT TERMS

Invoicing must occur monthly in arrears, referencing the unique PPPL purchase order number. Payment terms are strictly regulated by corporate socioeconomic size classifications:

• Large Business Enterprises: Net 30 days from receipt of an approved invoice.

• Other than Large Business (Small/Diverse Businesses): Net 15 days from receipt of an approved invoice to promote diverse enterprise participation.

• No Prepayment: Prepayment or advance billing for annual software maintenance agreements (SMAs), licensing, or projected parts is strictly prohibited. PPPL will only disburse funds after services are rendered or verified.

8. ONBOARDING SUPPLIER MANAGEMENT SYSTEM

Successful offeror must be registered with PPPL’s Supplier Management System (SMS). Remittance addresses printed on the invoice must be consistent with the information provided to PPPL during onboarding process. Any consistency from the information mentioned above may cause delay in processing payment.

9. PROCUREMENT TIMELINE & TECHNICAL QUESTION DEADLINE

To ensure the procurement team has enough time to issue formal clarifying addenda, technical questions must be submitted exactly two (2) weeks prior to bid closing.

• RFP Release Date: June 12, 2026

• Mandatory Site Walk-Through: To Be Determined (TBD)

• Deadline for Technical Questions: June 18, 2026 at 4:00 PM EST

• PPPL Official Response to Questions: June 24, 2026

• RFP Closing Date & Time: July 14, 2026 at 4:00 PM EST

• Submission Format: One (1) combined PDF file

• Page Limitation: Maximum of twenty-five (25) pages (excluding certificates)

• Delivery Mechanism: Email submission to Marissa Zara | mzara@pppl.gov

• Proposal Firm-Hold Period: All pricing proposals and terms submitted by vendors shall remain firm, valid, and binding for a minimum period of ninety (90) calendar days following the June 15 closing date.

10. PROCESS FOR SUBMITTING OFFICIAL AMENDMENTS

PPPL reserves the right to modify, amend, or supplement any part of this RFP prior to the closing deadline.

• Formal Issuance: All official changes, response clarifications, or structural rewrites to this procurement will be issued via numbered written addenda (e.g., Amendment 001, Amendment 002).

• Distribution: Amendments will be compiled by the procurement specialist and emailed directly to all participants who registered or attended the mandatory site walk-through.

• Bidder Responsibility: Bidders are strictly responsible for checking their communications for modifications.

Failure to acknowledge issued amendments can lead to immediate proposal rejection. Bidders must sign and return the amendment confirmation page with their final technical submittal.

11. PROPOSAL SUBMISSION REQUIREMENTS

Section A: Cover Page, Corporate Profile, & Signed Acknowledgements

• Company Legal Name, UEI Number, and CAGE Code.

• Primary Point of Contact (Name, Title, Phone, Email).

• Socioeconomic Status declaration under NAICS code 561621 (Small Business, SDB, WOSB, HUBZone, or

SDVOSB)

• Written confirmation of the 90-day proposal validity hold.

• Executed Contract Acknowledgement Signature Sheet in Section 15

Section B: Technical Capabilities & Factory Certifications

• Corporate Certifications: Copies of valid dealer/integrator credentials for RS2, HID, Avigilon, and Easy Lobby.

• Personnel Certifications: Resumes and valid manufacturer certifications for local technicians.

Section C: Technical Proposal Questionnaire Responses

• Complete text responses to all numbered prompt blocks detailed in Section 12

Section D: Past Performance

• Summaries of exactly three (3) contracts completed within the last three (3) years of similar scale and complexity

Section E: SLA Compliance Plan

• Written narrative detailing how the firm will guarantee response times and tracking maps of the primary dispatch facility.

Section F: Pricing Proposal Breakdown

• See Section 14

12. TECHNICAL PROPOSAL QUESTIONNAIRES

Bidders must provide direct, itemized responses to the following questions within Section C of their submittal package.

General or evasive text will result in lower evaluation points.

1. Platform Integration Experience: Describe your firm's specific experience in integrating RS2 Access IT software controls with HID PIV Class high-assurance card readers. Detail at least one active instance where your firm troubleshot structural data syncing failures between these two environments.

2. VASS Maintenance Framework: Outline your standard technical methodology for executing preventative maintenance on Avigilon network video recording servers and storage arrays without inducing significant system dropouts or missing active camera recording frames.

3. Technician Redundancy & Deployments: In the event your primary factory-certified technician assigned to PPPL is unavailable due to illness or competing projects, detail your regional employee bench depth. How many other factory-certified RS2 and Avigilon technicians do you employ within a 100-mile operating radius?

13. SOURCE SELECTION & TECHNICAL EVALUATION CRITERIA

1. Technical Capabilities & Questionnaire Quality (40 Points)

Evaluation of factory-certified technician deployment logistics.

Verification of corporate premier partner relationships with RS2, HID, Avigilon, and Easy Lobby.

Granular depth, clarity, and competence demonstrated within the Section 12 Questionnaire responses.

2. Past Performance & ES&H Safety History (30 Points)

Relevance, scale, and performance history of the 3 submitted contract summaries.

Demonstrated experience handling DOE, federal, or high-security academic facility frameworks.

Evaluation of the bidder's EMR metrics and corporate commitment to protective lock/electrical safety rules.

3. Pricing Proposal Breakdown (30 Points)

Total Contract Value Score: Financial evaluation points will be derived from the calculated 5-Year Cumulative Grand Total (Base Year + 4 Option Years).

Low-Bid Matrix: The lowest-priced 5-year cumulative proposal receives the full 30 points.

14. PRICING PROPOSAL BREAKDOWN

Bidders must submit financial proposals using the line-item layout below. Covers the pass-through and management of active software maintenance agreements (SMA) and runtime licenses. All rates must be fully burdened (inclusive of overhead, tools, travel, profit, and compliance with SCA wage minimums).

TABLE 1: ANNUAL FIXED-FEE SERVICE

Item Service Description Base Year

Cost Option Year 1

Cost Option Year 2

Cost Option Year 3

Cost Option Year 4

Cost

1.1 SMA – RS2 AccessIT $ $ $ $ $

1.2 SMA – Avigilon VMS $ $ $ $ $

1.3 SMA – Easy Lobby $ $ $ $ $

1.4 HID PIV Class Run Time License (RTL) & Maintenance $ $ $ $ $

1.5 Bi-Annual Preventative Maintenance/Inspection $ $ $ $ $

SUB Annual Fixed-Fee Totals $ $ $ $ $

TCV 5-YEAR GRAND TOTAL VALUE $

SUB – Sub-total

TCV – Total Contract Value

TABLE 2: TIME & MATERIALS HOURLY LABOR RATE

Item Labor Category Base Year

(Std/Emerg) Option 1

(Std/Emerg) Option 2

(Std/Emerg) Option 3

(Std/Emerg) Option 4

(Std/Emerg)

2.1 Senior Systems Engineer $ / $ $ / $ $ / $ $ / $ $ / $

2.2 Certified Security Technician $ / $ $ / $ $ / $ $ / $ $ / $

2.3 Apprentice / Helper $ / $ $ / $ $ / $ $ / $ $ / $

STD – Standard hours | non-emergency

EMERG - Emergency

TABLE 3: MATERIAL AND COMPONENT MARK-UPS

Item Component Category Base Markup % Option 1 % Option 2 % Option 3 % Option 4 %

3.1 Field Devices (Readers, REX) % % % % %

3.2 Control Panels & Boards % % % % %

3.3 VASS Hardware (Cameras) % % % % %

15. SIGNATURE BLOCK PAGE FOR CONTRACT ACKNOWLEDGEMENT

By signing below, the bidding entity formally acknowledges all terms, conditions, scope architectures, security rules, and performance clauses detailed within this Request for Proposal (RFP) 260022804. The bidder certifies that all pricing frameworks submitted remain firm and valid for a duration of ninety (90) calendar days from closing.

Company Legal Name: ________________________________________________________________________________________

UEI Number: _____________________________________________________ CAGE Code: ________________________________

Authorized Representative Name: _________________________________Title:___________ _____________________________

Signature: _______________________________________________________Date: _______________________________________

16. ATTACHMENTS

1.Statement of Work

2.Wage Determination under the Service Contract Act# 2015-4193, Rev 26

3.Commercial Terms and Conditions, PPL-PD-CTC; Rev 25 (11/21

4.Service Contract Act Terms and Conditions PPL-PD-S Rev 7; Dated 05/19

5.Provisions for Work on PPPL site Terms and Conditions PPL-PD-T Rev 4; dated 11/21

1.0 INTRODUCTION & SCOPE

The Princeton Plasma Physics Laboratory (PPPL), located at 100 Stellarator Road in Princeton, New Jersey, is interested in engaging a subcontractor to provide comprehensive operational support, maintenance, and technical services necessary to ensure the continuous availability and reliability of PPPL’s Physical Access Control System (PACS) access control and video assessment and surveillance system (VASS). PACS includes the hardware and software for: RS2 AccessIT; Avigilon VASS; and Easy Lobby visitor management system. The subcontractor will provide both scheduled and emergency support for the troubleshooting and repair of system software issues, failed components, software update support, operational testing, preventative maintenance, and technical support. PACS access control and VASS capabilities are critical to the successful operation of PPPL and are integral to the security and safety of both personnel and property.

Covered systems include:

● RS2 AccessIT

● HID PIV Class

● Avigilon

● Easy Lobby Visitor Management System

● Card readers and badge access control field devices

○ Card readers

○ Request to Exit (REX) components

● Door monitoring controllers and panels

● Video recording servers and storage

● Cameras and enclosures

● Access control servers and databases

● Workstations and monitoring consoles

● Associated software platforms and integrations

The scope is as follows:

● The subcontractor will assign a single point of contact, with the technical ability to interface with the PPPL PTR and all subcontractor activities related to the contract will be coordinated to minimize impact to site operations.

● The subcontractor will provide subject matter experts with the technical competence related to each covered system who will develop familiarity of the operational implementation of covered systems at PPPL.

● The subcontractor will provide comprehensive hardware and software performance testing, preventative maintenance, and repair services for covered systems.

● The subcontractor will provide Quarterly scheduled preventative maintenance to include:

o Routine system health checks.

o Software version checks.

o Firmware verification and updates.

o Hardware inspections.

o Cleaning and testing of cameras and readers.

o Vendor recommended maintenance.

o Verification of recording retention policies.

o Backup validation.

o Battery testing (UPS and controllers).

o Review of system logs and performance metrics.

● The subcontractor will respond to outages affecting one or more of the covered systems when unavailable, inaccessible, or completely unresponsive by providing:

o 24x7 support availability o one hour remote response and assistance o onsite support (if required) within four hours o Continuous support until services are restored and performance testing is completed

● The subcontractor will respond to a partial system disruption (one or more component of one or more system is not functioning as designed) by providing:

o Response within 4 business hours during normal working hours (7am-4pm, Monday through Friday).

o Onsite support within the next business day.

● The subcontractor will respond to a minor issue by providing:

o Response within one business day of contact during normal working hours.

o Remote or onsite support within one business day.

● The subcontractor will provide hardware support for covered system components.

o Troubleshooting and repair/replacement of failed components.

o Replacement of defective cameras, card readers, panels, and controllers.

● The subcontractor will provide software assurance and maintenance to AccessIT, Easy Lobby, and Avigilon (no additional licensing fees will be paid to the subcontractor for covered software updates) to include:

o Access to and installation of all software updates, patches, and minor/major version upgrades.

o Access to and installation of all security patches and vulnerability remediation.

o Licensing maintenance and renewal management.

o Compatibility testing with operating system updates.

o Database maintenance and optimization.

o Report generation and statistical analysis.

o Vendor support and training related to updates or new capabilities.

● The subcontractor will provide technical support related to the addition of new PPPL system components and/or associated programming for new PPPL provided devices or components for covered systems.

● The subcontractor will serve as SME for design and implementation of system expansion/enhancements, including the Princeton Plasma Innovation Center (PPIC) project, to ensure seamless integration during installation. Additional hardware or software required for successful implementation will not be part of the contract scope and will be addressed separately.

● The subcontractor will provide an annual users training class and an administrator refresher course for covered systems.

2.0 APPLICABLE DOCUMENTS

The controlling documents shall be provided by PPPL.

3.0 APPLICABLE DRAWINGS

The as-built drawings will be provided by PPPL.

4.0 RESPONSIBILITIES

4.1. PRINCETON PLASMA PHYSICS LABORATORY

4.1.1. Shall provide a Princeton Technical Representative (PTR) to coordinate all activities and work with the vendor.

4.1.2. For onsite work:

• PPPL Site Protection staff retain the right to inspect all vehicles and personal property before entering and leaving the site.

• The subcontractor will have to present a Real ID compliant document at the Guard booth.

• If the onsite work hours are more than forty in a calendar year, then the subcontractor must take General Employee Training (GET) training prior to being onsite.

• Subcontractor personnel requiring regular physical access to PPPL will be processed for a PPPL ID badge and may require the issuance of a Homeland Security Presidential Directive -12 (HSPD-

12) Personal Identity Verification (PIV) credential.

• If needed, PPPL shall provide wireless PPPL Guest network only after registering computers that would meet limited set of configuration requirements.

4.1.3. Will provide remote access to PPPL systems for the purposes of remote troubleshooting.

• All remote access requires coordination with PPPL

• Subcontractor personnel requiring remote/logical access to PPPL will require the issuance of a Homeland Security Presidential Directive -12 (HSPD-12) Personal Identity Verification (PIV) credential.

4.2. SUBCONTRACTOR

4.2.1. PPPL General Requirements:

• The subcontractor shall provide PPPL with a single point of contact, including a phone number, to report any issues.

• The subcontractor shall ensure that the technicians/engineers working on this project are proficient and certified in the design, installation and testing of covered systems.

• The subcontractor shall provide PPPL access and instructions to any proprietary issue reporting or “trouble ticket” system to report and log issues related to the contract.

• The subcontractor shall provide the escalation procedure with contact information for any outages/issues that are not resolved in a timely manner.

• All work shall be performed in accordance with 10 CFR 851 and OSHA requirements.

• In the areas where Personal Protection Equipment (PPE) is required, the subcontractor shall be equipped with safety shoes, safety glasses and a hard hat.

4.2.2 Notification Requirements Off-Normal Events and Issues

The subcontractor shall notify PPPL within 15 minutes of becoming aware of off-normal events and issues. Off-normal issues include:

4.2.2.1 Personnel injuries of any kind.

4.2.2.2 Near misses that could have resulted in significant (recordable injury or worse) worker injuries

4.2.2.3 Uncontrolled or unforeseen personnel exposure to radiation, chemical, biological or physical hazards (e.g., noise, laser, ultraviolet light, heat, etc.)

4.2.2.4 Fire emergency of any kind.

4.2.2.5 Any unexpected discovery of an uncontrolled hazardous energy source (e.g., live electrical power circuit, etc.) not including discoveries made by zero energy checks and other precautionary investigations made before work is authorized to begin.

4.2.2.6 Any failure to follow a prescribed hazardous energy control process (e.g., lockout/tagout).

4.2.2.7 Damage of any kind to Laboratory property

4.2.2.8 Damage of any kind to personal property owned by PPPL employees, guests, and visitors

4.2.2.9 Any spills of chemicals, fuels, or lubricants, etc.

4.2.2.10 Other off-normal events and issues deemed by the subcontractor to require notification.

4.2.2.11 In the event of an off-normal event or issue, the Subcontractor and its lower-tier subcontractors SHALL:

● Notify PPPL Emergency Services Unit at x3333 onsite or 609-243-3333 via cell phone for emergency response, if required.

● Take immediate action to evacuate and post the affected area, if required.

● STOP related work or work in the affected area.

● Take actions to post and safe-off the affected area.

● Within 15 minutes: Contact subcontractor site supervisor, PPPL PTR, ES&H

Construction Safety Engineer, and ES&H Head.

4.2.2.12 Regarding these off-normal events or issues, no recovery actions (other than those immediately required to preserve life safety) or repairs are to take place until they are reviewed by the Subcontractor and PPPL, and specifically authorized by the PPPL PTR (who has consulted with SMEs) or ES&H Department Head. Resumption of work that has been stopped by PPPL due to off-normal events and issues must follow the provisions of PPPL Policy P-012, STOP Work Authority.

5.0 REQUIREMENTS

5.1. The subcontractor must provide comprehensive operational support, maintenance, and technical services necessary to ensure the continuous availability and reliability of PPPL’s Physical Access Control System (PACS) access control and video assessment and surveillance system (VASS).

5.2. This agreement includes all labor and material costs associated with the defined scope.

5.3. Subcontractor is to provide a quarterly maintenance plan.

5.4. No additional licensing fees will be paid to the subcontractor for covered software updates unless related to expansion/enhancement as specified.

5.5. EQUIPMENT DEFINITION

5.5.1. SPECIFICATIONS AND STANDARDS

• The subcontractor shall complete all work in compliance with state and local codes and standards.

• All work shall be performed in accordance with 10 CFR 851 and OSHA requirements.

5.5.2. GENERAL DESIGN FEATURES

Not applicable

5.5.3. MATERIALS

5.5.4. ELECTROMAGNETIC INTERFERENCE AND SUSCEPTIBILITY

5.5.5. IDENTIFICATION AND MARKING

5.5.6. WORKMANSHIP

• The subcontractor shall provide qualified personnel to perform all offsite and onsite work.

5.2.7 SUBCONTRACTOR EQUIPMENT USE

6.0 TEST & INSPECTION REQUIREMENTS

6.1. PERFORMANCE TESTS:

● Conduct quarterly inspections and performance tests as scheduled by PTR as per approved

PPPL procedure and witnessed and accepted by PPPL end user. All deficiencies not meeting operational requirements shall be corrected.

● Performance testing shall be conducted and successfully completed following any repair or activity. All deficiencies not meeting operational requirements shall be corrected.

6.2. ACCEPTANCE TESTS:

● Not applicable.

6.3. SUPPLIER HOLD POINTS

● Not applicable

7.0 QUALIFICATIONS

All materials covered by this SOW for maintenance and associated contract documents must be installed by a Subcontractor experienced in the installation of these systems. Prior to award, the Subcontractor shall provide PPPL in writing qualifications including examples of service contracts of similar scope.

8.0 ENVIRONMENT, SAFETY, AND HEALTH

If the onsite work is more than 40 hours in a calendar year, then the subcontractor shall have to successfully complete PPPL’s General Employee Training (GET) training.

9.0 QUALITY ASSURANCE REQUIREMENTS

10.0 SHIPPING STORAGE AND HANDLING

11.0 WARRANTY

Warranty will apply for components replaced as part of the service contract.

12.0 ATTACHMENTS

13.0 DOCUMENTATION & DELIVERABLEDeliverables List

PO / Subcontract / BOA / BPA #: Subcontractor

Physical Deliverables Required

When Deliverable Is Required

Received

1 Quarterly report detailing preventative maintenance, performance testing, and status of systems and components Quarterly

2 Performance Testing of affected components following repair or activity Following action

3 Return of damaged/failed components Completion

Exceptions (Add justification for any missing physical deliverables that will not be received):

Document Deliverables Required

When

Is Required format (paper, electronic etc.)

Storage Location for

Received (ü)

1 Detail related to any software/firmware update to include revision detail and acceptance testing.

Following update

2 Instruction and training for affected updates Following update

3 Training materials as required

4 Quarterly report to document activities and trending to include applicable modifications to maintenance to address

Quarterly

5 Quarterly maintenance plan Quarterly

Exceptions (Add justification for any missing document deliverables that will not be received):

Princeton Technical Representative/COG:

(Sign-off and provide to the Operations Center when job is completed and deliverables are dispositioned and placed/filed in Operations Center (or other Project, Department or Division designated file center)

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4193 Daniel W. Simms Division of | Revision No.: 26 Director Wage Determinations| Date Of Last Revision: 07/22/2024

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |Executive Order 14026 generally applies to | |after January 30, 2022, or the |the contract. | |contract is renewed or extended (e.g., |The contractor must pay all covered workers | |an option is exercised) on or after |at least $17.20 per hour (or the applicable | |January 30, 2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. | |If the contract was awarded on or |Executive Order 13658 generally applies to | |between January 1, 2015 and January 29,|the contract. | |2022, and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30, |at least $12.90 per hour (or the applicable | |2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

State: New Jersey

Area: New Jersey County of Middlesex

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 21.79 01012 - Accounting Clerk II 24.45 01013 - Accounting Clerk III 27.35 01020 - Administrative Assistant 39.46 01035 - Court Reporter 46.39 01041 - Customer Service Representative I 18.64 01042 - Customer Service Representative II 20.34 01043 - Customer Service Representative III 22.82 01051 - Data Entry Operator I 19.66 01052 - Data Entry Operator II 21.45 01060 - Dispatcher, Motor Vehicle 28.37 01070 - Document Preparation Clerk 19.81 01090 - Duplicating Machine Operator 19.81 01111 - General Clerk I 18.55 01112 - General Clerk II 20.24 01113 - General Clerk III 22.72

8/15/24, 9:36 AM SAM.gov https://sam.gov/wage-determination/2015-4193/26 1/11

01120 - Housing Referral Assistant 28.42 01141 - Messenger Courier 20.10 01191 - Order Clerk I 19.09 01192 - Order Clerk II 21.37 01261 - Personnel Assistant (Employment) I 21.74 01262 - Personnel Assistant (Employment) II 24.32 01263 - Personnel Assistant (Employment) III 27.11 01270 - Production Control Clerk 28.91 01290 - Rental Clerk 20.00 01300 - Scheduler, Maintenance 22.79 01311 - Secretary I 22.79 01312 - Secretary II 25.50 01313 - Secretary III 28.42 01320 - Service Order Dispatcher 24.37 01410 - Supply Technician 39.46 01420 - Survey Worker 24.16 01460 - Switchboard Operator/Receptionist 19.02 01531 - Travel Clerk I 21.18 01532 - Travel Clerk II 23.49 01533 - Travel Clerk III 25.53 01611 - Word Processor I 18.82 01612 - Word Processor II 21.14 01613 - Word Processor III 23.64 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 29.36 05010 - Automotive Electrician 28.50 05040 - Automotive Glass Installer 27.31 05070 - Automotive Worker 27.31 05110 - Mobile Equipment Servicer 24.42 05130 - Motor Equipment Metal Mechanic 29.68 05160 - Motor Equipment Metal Worker 27.31 05190 - Motor Vehicle Mechanic 29.68 05220 - Motor Vehicle Mechanic Helper 23.15 05250 - Motor Vehicle Upholstery Worker 26.12 05280 - Motor Vehicle Wrecker 27.31 05310 - Painter, Automotive 28.50 05340 - Radiator Repair Specialist 27.31 05370 - Tire Repairer 18.73 05400 - Transmission Repair Specialist 29.68 07000 - Food Preparation And Service Occupations 07010 - Baker 18.00 07041 - Cook I 21.38 07042 - Cook II 23.86 07070 - Dishwasher 16.75*** 07130 - Food Service Worker 17.65 07210 - Meat Cutter 21.33 07260 - Waiter/Waitress 18.32 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 23.22 09040 - Furniture Handler 16.74*** 09080 - Furniture Refinisher 23.24 09090 - Furniture Refinisher Helper 18.79 09110 - Furniture Repairer, Minor 21.14 09130 - Upholsterer 23.10 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 19.29 11060 - Elevator Operator 18.86 11090 - Gardener 24.90 11122 - Housekeeping Aide 18.86 11150 - Janitor 18.86 11210 - Laborer, Grounds Maintenance 20.48 11240 - Maid or Houseman 19.18 11260 - Pruner 19.04 11270 - Tractor Operator 23.44 11330 - Trail Maintenance Worker 20.48 https://sam.gov/wage-determination/2015-4193/26 2/11

11360 - Window Cleaner 20.29 12000 - Health Occupations 12010 - Ambulance Driver 24.60 12011 - Breath Alcohol Technician 28.59 12012 - Certified Occupational Therapist Assistant 35.79 12015 - Certified Physical Therapist Assistant 33.14 12020 - Dental Assistant 22.74 12025 - Dental Hygienist 47.61 12030 - EKG Technician 40.00 12035 - Electroneurodiagnostic Technologist 40.00 12040 - Emergency Medical Technician 24.60 12071 - Licensed Practical Nurse I 25.56 12072 - Licensed Practical Nurse II 28.59 12073 - Licensed Practical Nurse III 31.88 12100 - Medical Assistant 22.37 12130 - Medical Laboratory Technician 38.55 12160 - Medical Record Clerk 26.36 12190 - Medical Record Technician 29.49 12195 - Medical Transcriptionist 21.99 12210 - Nuclear Medicine Technologist 51.30 12221 - Nursing Assistant I 16.26*** 12222 - Nursing Assistant II 18.29 12223 - Nursing Assistant III 20.01 12224 - Nursing Assistant IV 22.40 12235 - Optical Dispenser 29.67 12236 - Optical Technician 20.31 12250 - Pharmacy Technician 19.98 12280 - Phlebotomist 23.30 12305 - Radiologic Technologist 42.76 12311 - Registered Nurse I 32.76 12312 - Registered Nurse II 38.41 12313 - Registered Nurse II, Specialist 38.41 12314 - Registered Nurse III 49.39 12315 - Registered Nurse III, Anesthetist 49.39 12316 - Registered Nurse IV 59.22 12317 - Scheduler (Drug and Alcohol Testing) 35.42 12320 - Substance Abuse Treatment Counselor 29.83 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 27.27 13012 - Exhibits Specialist II 33.78 13013 - Exhibits Specialist III 41.32 13041 - Illustrator I 31.66 13042 - Illustrator II 39.22 13043 - Illustrator III 47.41 13047 - Librarian 37.84 13050 - Library Aide/Clerk 17.78 13054 - Library Information Technology Systems 34.17 Administrator 13058 - Library Technician 24.10 13061 - Media Specialist I 24.65 13062 - Media Specialist II 27.58 13063 - Media Specialist III 30.75 13071 - Photographer I 22.76 13072 - Photographer II 25.46 13073 - Photographer III 31.55 13074 - Photographer IV 38.59 13075 - Photographer V 46.69 13090 - Technical Order Library Clerk 22.32 13110 - Video Teleconference Technician 30.64 14000 - Information Technology Occupations 14041 - Computer Operator I 26.87 14042 - Computer Operator II 30.06 14043 - Computer Operator III 33.52 14044 - Computer Operator IV 37.24 14045 - Computer Operator V 41.24 https://sam.gov/wage-determination/2015-4193/26 3/11

14071 - Computer Programmer I (see 1) 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 26.87 14160 - Personal Computer Support Technician 37.24 14170 - System Support Specialist 41.24 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 42.02 15020 - Aircrew Training Devices Instructor (Rated) 50.83 15030 - Air Crew Training Devices Instructor (Pilot) 60.93 15050 - Computer Based Training Specialist / Instructor 42.02 15060 - Educational Technologist 38.90 15070 - Flight Instructor (Pilot) 60.93 15080 - Graphic Artist 37.28 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 60.93 15086 - Maintenance Test Pilot, Rotary Wing 60.93 15088 - Non-Maintenance Test/Co-Pilot 60.93 15090 - Technical Instructor 31.19 15095 - Technical Instructor/Course Developer 38.04 15110 - Test Proctor 25.11 15120 - Tutor 25.11 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 19.56 16030 - Counter Attendant 19.56 16040 - Dry Cleaner 22.36 16070 - Finisher, Flatwork, Machine 19.56 16090 - Presser, Hand 19.56 16110 - Presser, Machine, Drycleaning 19.56 16130 - Presser, Machine, Shirts 19.56 16160 - Presser, Machine, Wearing Apparel, Laundry 19.56 16190 - Sewing Machine Operator 23.27 16220 - Tailor 24.21 16250 - Washer, Machine 20.49 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 28.84 19040 - Tool And Die Maker 33.42 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 21.86 21030 - Material Coordinator 28.91 21040 - Material Expediter 28.91 21050 - Material Handling Laborer 18.72 21071 - Order Filler 17.74 21080 - Production Line Worker (Food Processing) 21.86 21110 - Shipping Packer 21.73 21130 - Shipping/Receiving Clerk 21.73 21140 - Store Worker I 20.32 21150 - Stock Clerk 25.47 21210 - Tools And Parts Attendant 21.86 21410 - Warehouse Specialist 21.86 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 44.73 23019 - Aircraft Logs and Records Technician 37.70 23021 - Aircraft Mechanic I 43.05 23022 - Aircraft Mechanic II 44.73 23023 - Aircraft Mechanic III 46.40 23040 - Aircraft Mechanic Helper 33.51 23050 - Aircraft, Painter 41.44 23060 - Aircraft Servicer 37.70 23070 - Aircraft Survival Flight Equipment Technician 41.44 23080 - Aircraft Worker 39.73 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 39.73 https://sam.gov/wage-determination/2015-4193/26 4/11

I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 43.05

II

23110 - Appliance Mechanic 27.41 23120 - Bicycle Repairer 21.24 23125 - Cable Splicer 55.07 23130 - Carpenter, Maintenance 32.74 23140 - Carpet Layer 28.96 23160 - Electrician, Maintenance 40.52 23181 - Electronics Technician Maintenance I 33.59 23182 - Electronics Technician Maintenance II 35.04 23183 - Electronics Technician Maintenance III 36.40 23260 - Fabric Worker 41.90 23290 - Fire Alarm System Mechanic 29.60 23310 - Fire Extinguisher Repairer 31.03 23311 - Fuel Distribution System Mechanic 48.19 23312 - Fuel Distribution System Operator 39.84 23370 - General Maintenance Worker 26.87 23380 - Ground Support Equipment Mechanic 43.05 23381 - Ground Support Equipment Servicer 37.70 23382 - Ground Support Equipment Worker 39.73 23391 - Gunsmith I 31.03 23392 - Gunsmith II 34.63 23393 - Gunsmith III 37.53 23410 - Heating, Ventilation And Air-Conditioning 35.25 Mechanic 23411 - Heating, Ventilation And Air Contidioning 36.62 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 36.87 23440 - Heavy Equipment Operator 42.64 23460 - Instrument Mechanic 31.98 23465 - Laboratory/Shelter Mechanic 36.12 23470 - Laborer 18.72 23510 - Locksmith 28.26 23530 - Machinery Maintenance Mechanic 31.74 23550 - Machinist, Maintenance 28.52 23580 - Maintenance Trades Helper 21.32 23591 - Metrology Technician I 32.42 23592 - Metrology Technician II 33.69 23593 - Metrology Technician III 34.95 23640 - Millwright 40.73 23710 - Office Appliance Repairer 29.06 23760 - Painter, Maintenance 28.45 23790 - Pipefitter, Maintenance 38.07 23810 - Plumber, Maintenance 36.64 23820 - Pneudraulic Systems Mechanic 37.53 23850 - Rigger 41.61 23870 - Scale Mechanic 34.63 23890 - Sheet-Metal Worker, Maintenance 35.65 23910 - Small Engine Mechanic 23.98 23931 - Telecommunications Mechanic I 35.34 23932 - Telecommunications Mechanic II 36.72 23950 - Telephone Lineman 49.52 23960 - Welder, Combination, Maintenance 27.65 23965 - Well Driller 37.06 23970 - Woodcraft Worker 37.53 23980 - Woodworker 31.03 24000 - Personal Needs Occupations 24550 - Case Manager 22.52 24570 - Child Care Attendant 17.34 24580 - Child Care Center Clerk 21.63 24610 - Chore Aide 17.56 24620 - Family Readiness And Support Services 22.52 Coordinator 24630 - Homemaker 22.63 https://sam.gov/wage-determination/2015-4193/26 5/11

25000 - Plant And System Operations Occupations 25010 - Boiler Tender 46.63 25040 - Sewage Plant Operator 37.04 25070 - Stationary Engineer 46.63 25190 - Ventilation Equipment Tender 36.29 25210 - Water Treatment Plant Operator 37.04 27000 - Protective Service Occupations 27004 - Alarm Monitor 28.40 27007 - Baggage Inspector 19.12 27008 - Corrections Officer 38.62 27010 - Court Security Officer 39.73 27030 - Detection Dog Handler 21.39 27040 - Detention Officer 38.62 27070 - Firefighter 44.02 27101 - Guard I 19.12 27102 - Guard II 21.39 27131 - Police Officer I 41.60 27132 - Police Officer II 46.22 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 20.44 28042 - Carnival Equipment Repairer 21.71 28043 - Carnival Worker 16.60*** 28210 - Gate Attendant/Gate Tender 22.60 28310 - Lifeguard 16.58*** 28350 - Park Attendant (Aide) 25.28 28510 - Recreation Aide/Health Facility Attendant 18.46 28515 - Recreation Specialist 31.33 28630 - Sports Official 20.14 28690 - Swimming Pool Operator 24.24 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 44.51 29020 - Hatch Tender 44.51 29030 - Line Handler 44.51 29041 - Stevedore I 42.22 29042 - Stevedore II 48.84 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 53.11 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 36.62 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 40.33 30021 - Archeological Technician I 22.17 30022 - Archeological Technician II 24.79 30023 - Archeological Technician III 30.72 30030 - Cartographic Technician 30.72 30040 - Civil Engineering Technician 32.63 30051 - Cryogenic Technician I 34.02 30052 - Cryogenic Technician II 37.58 30061 - Drafter/CAD Operator I 22.17 30062 - Drafter/CAD Operator II 24.79 30063 - Drafter/CAD Operator III 27.64 30064 - Drafter/CAD Operator IV 34.02 30081 - Engineering Technician I 19.46 30082 - Engineering Technician II 22.24 30083 - Engineering Technician III 25.28 30084 - Engineering Technician IV 31.22 30085 - Engineering Technician V 38.08 30086 - Engineering Technician VI 46.20 30090 - Environmental Technician 26.97 30095 - Evidence Control Specialist 30.72 30210 - Laboratory Technician 28.48 30221 - Latent Fingerprint Technician I 34.45 30222 - Latent Fingerprint Technician II 38.05 30240 - Mathematical Technician 36.98 30361 - Paralegal/Legal Assistant I 25.38 30362 - Paralegal/Legal Assistant II 31.45 30363 - Paralegal/Legal Assistant III 38.46 https://sam.gov/wage-determination/2015-4193/26 6/11

30364 - Paralegal/Legal Assistant IV 46.53 30375 - Petroleum Supply Specialist 37.58 30390 - Photo-Optics Technician 30.72 30395 - Radiation Control Technician 37.58 30461 - Technical Writer I 30.50 30462 - Technical Writer II 37.31 30463 - Technical Writer III 45.13 30491 - Unexploded Ordnance (UXO) Technician I 33.76 30492 - Unexploded Ordnance (UXO) Technician II 40.84 30493 - Unexploded Ordnance (UXO) Technician III 48.95 30494 - Unexploded (UXO) Safety Escort 33.76 30495 - Unexploded (UXO) Sweep Personnel 33.76 30501 - Weather Forecaster I 34.02 30502 - Weather Forecaster II 41.38 30620 - Weather Observer, Combined Upper Air Or (see 2) 27.64 Surface Programs 30621 - Weather Observer, Senior (see 2) 30.72 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 40.84 31020 - Bus Aide 29.58 31030 - Bus Driver 38.09 31043 - Driver Courier 20.42 31260 - Parking and Lot Attendant 17.08*** 31290 - Shuttle Bus Driver 19.88 31310 - Taxi Driver 17.64 31361 - Truckdriver, Light 21.69 31362 - Truckdriver, Medium 22.97 31363 - Truckdriver, Heavy 29.91 31364 - Truckdriver, Tractor-Trailer 29.91 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 19.91 99030 - Cashier 16.72*** 99050 - Desk Clerk 18.28 99095 - Embalmer 39.23 99130 - Flight Follower 33.76 99251 - Laboratory Animal Caretaker I 19.89 99252 - Laboratory Animal Caretaker II 21.13 99260 - Marketing Analyst 44.95 99310 - Mortician 36.79 99410 - Pest Controller 22.37 99510 - Photofinishing Worker 25.17 99710 - Recycling Laborer 33.83 99711 - Recycling Specialist 38.72 99730 - Refuse Collector 31.43 99810 - Sales Clerk 17.41 99820 - School Crossing Guard 19.12 99830 - Survey Party Chief 37.74 99831 - Surveying Aide 22.87 99832 - Surveying Technician 30.18 99840 - Vending Machine Attendant 25.78 99841 - Vending Machine Repairer 30.89 99842 - Vending Machine Repairer Helper 26.08

***Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($17.20 per hour) or 13658 ($12.90 per hour).