Revised_2022 Great Lakes Patrol Boat Specs - Wm Alden Smith.docx
DOCX document 30 KB Posted
- Attached to
- LED - Renovate Four Patrol Boats - Addendum #1
- Solicitation number
- RFP - 751 - 230000000367
- Issued by
- Ingham County, Lansing City, Michigan
About this file
This document is a set of revised specifications for the renovation of four patrol boats for the Michigan Department of Natural Resources (DNR). The key details are:
The specification outlines the required work, including repainting the exterior and interior, refinishing the deck, replacing seating, galley and head components, replacing all electrical wiring and components, replacing the engines and transmissions, and numerous other updates to the boats' systems and equipment. The work is to be performed on four patrol boats for the Ingham County and Lansing City law enforcement agencies. The boats are to be delivered to the service area no later than November 1 and returned to the water by May 1, unless an alternate schedule is agreed upon.
The specification includes detailed technical requirements for the replacement and refurbishment of specific components and systems. It also includes provisions for the removal of existing law enforcement decals and the application of new decals. Pricing for the engine rebuild option is included as an alternative to full engine replacement. The project is funded by the State of Michigan and the local jurisdictions, but the specific funding amounts and sources are not provided.
View the file
Other files
Show all 35
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2022 GREAT LAKES ENFORCEMENT UNIT PATROL BOAT SPECIFICATIONS
William Alden Smith Vessel
| SPECIFICATIONS |
| PROPOSED BOATS MEET SPECIFICATIONS |
(Yes or No)
| PROPOSED BOATS MEET SPECIFICATIONS With Remarks or Exceptions |
| DOES NOT MEET SPECIFICATION |
Paint
Repaint exterior and interior of vessel (NOT TO INCLUDE BOTTOM PAINT)
Repainting to match current color scheme and design.
Deck.
-Refinish non-skid coating on deck
Cabin Seating.
Three (3) Bentley Mariner Regular Duty Shock mitigating seats to replace current driver and passenger seats.
Three (3) Bentley Mariner Regular Duty shock Mitigating seats shall be:
-Non-Swivel -Seat covering shall be 27.9 oz. Naugahyde. (NO BALLISTIC NYLON)
Galley
New Norcold NR 715 AC/DC refrigerator Black in color, new square 304 grade stainless steel sink (to match current size), New swivel high arc faucet made of marine grade chrome plated brass Replace countertop (to match current color or proximity to current color), and replace all plumbing and electrical wiring
Head
Replace existing Raritan Toilet system with Raritan current model equivalent, replace countertop (to match current color or proximity to current color), new 304 grade round stainless steel sink (to match current size), exhaust fan, replace ceiling and wall panels (to match current color), and replace all plumbing and electrical wiring.
LEFT BLANK FOR SPACING
Wiring
Replace all electrical wiring, outlets, and switches throughout vessel and helm.
This is to include the large engine room cables
Update fuse box
Adding two (2) 5-volt USB outlets near helm
Throttles
Replace throttles with Glendinning electronic throttles
Dock Command removed from RFP
Rub rail
Replace all rub rail on vessel
Windows
Replace all windows seals
Replace all port holes in cabin
Water Lines
Replace all water lines and through haul fittings throughout vessel
Engine Room
Replace or add insulation and sound dampening material in engine room
Hatches
Replace all hatch seals
LEFT BLANK FOR SPACING
Engines and Trasmissions
Replace Starboard Caterpillar Marine Diesel Engine with Cummins marine Diesel Engine QSC-8.3L 500mhp (per engine) @2600rpm variable speed
Replace Port side Caterpillar Marine Diesel Engine with Cummins Marine Diesel Engine QSC-8.3L 500mhp (per engine) @2600rpm variable speed
Replace both transmissions
Credit for trade in of Two (2) Pre-Tier 4 Diessel Engines. Caterpillar Model 3126/420HP 6 cyclinder diesel engines
Hoses and Lines
Repalce all hoses and lines through out.
To include, but not limited to fuel, exhaust, transmission, coolant lines, and heat exchanger lines.
Outdrives removed from RFP
Law Enforcement Decals
Removal of all decals and placement of three law new law enforcement shields on hull and cabin. Locations will be decided by Michigan DNR. Decals supplied by Michigan DNR
Prop Shafts
Inspect port and starboard prop shafts for and replace where needed.
Replace sure seal system where the prop shaft goes through hull. Duramax Seal
Drive Shaft Bearings
Replace shaft bearings in the port and starboard prop struts
Ventilation Fans
Replace two current ventilation fans located on the port and starboard side of the helm
Steering System
Replace hydraulic steering system with new SeaStar iso 9001 or its updated equivalent
Deck Lights
Four (4) LED flood lights
– One (1) port, one (1) starboard, one (1) aft deck, and one (1) bow deck.
- Rigid Industries LED Lighting SR-Q Series
Searchlights
Replace current searchlights with the following:
Two (2) search lights with remote control pads.
- Arc Electronics Remote Control Searchlight System (Model RCL-75)
- Any additional required equipment and installation/labor.
Navigational Horn
Replace current horn with Kahlenberg Model K-380 Complete Air Horn Kit, White
Windshield Wiper System
Replace current windshield wipers with Intermittent windshield wiper system with washer. With an independent control knob for each wiper blade (2). Controls mounted on console.
Navigational Light
Replace current navigational lights with LED navigation lights (running and anchor).
Interior Dome lights
Replace all dome lights with red/white dome lights in cabin.
- Dr.LED Mars Dome LED Dome Lights
- 6 ¾ inch IP65
Siren Speaker
Replace current siren speaker with Whelen SA340STS Speaker
Light Bar
Whelen Cenator® SOLO™ TY WeCanX™ TY4****42” Single Color, Blue. To include associated wiring and adapters.
Battery Charging System
Replace current battery charging system with Pro Mariner Pro Nautic 1250 P and Pro Mariner 60 A Pro Safe Isolator Fail Safe
Rudder
Remove and inspect both rudder shafts and related linkages-repair or replace as needed.
Bilge Pumps
Replace all bilge bumps, hoses, and switches. Adding additional two (2) back up bilge pumps. 2000GPH
AIS
Raymarine AIS5000
TRANSCEIVER FOR FIRST RESPONDERS
Compass
New magnetic marine grade compass with dimmable backlighting
Fuel gauge
Replace non-functioning fuel gauge system
Dash gauges
Update dash gauges
Marine radio antenna
Replace marine radio antenna
Cabin Wall and Ceiling
Replace cabin wall and ceiling panels throughout
HVAC
Update current heating system and add air conditioning.
Generator
Rebuild generator head
Engine Rebuild
Instead of replacement of engines, cost of rebuilding Port and Caterpillar Model 3126/420HP 6 Cylinder Diesel Engines
LEFT BLANK FOR SPACING
Boat in and out
Boats to be delivered to service area no later than November 1 and would return to the water May 1, unless an alternate agreement is made in an effort to complete work in its entirety.
Black Water Holding Tank
New Kracor grey water holding tank (to be same gallon capacity as currently installed)
Fresh Water Holding Tank
New Kracor fresh water holding tank (to be same gallon capacity as currently installed)
File details come from the government source that posted it. Updated .