Revised_2022 Great Lakes Patrol Boat Specs - Rick Asher.docx
DOCX document 29 KB Posted
- Attached to
- LED - Renovate Four Patrol Boats - Addendum #1
- Solicitation number
- RFP - 751 - 230000000367
- Issued by
- Ingham County, Lansing City, Michigan
About this file
This document is a set of specifications for the renovation of four law enforcement patrol boats for the Michigan Department of Natural Resources. The specifications detail the required repairs and upgrades to the boats, including repainting the exterior and interior, replacing seating, galley and head components, updating the electrical wiring and systems, replacing the steering system, adding LED lighting, and updating the navigation electronics. The work must be completed between November 1 and May 1, with the boats delivered to the service area no later than November 1.
The document also provides background on the related state and local contract opportunity, which involves the renovation of the four patrol boats. The jurisdictions involved are Ingham County and the city of Lansing. The buyer contact for this opportunity is Laura Gyorkos. While no pricing terms, set asides, or funding sources are provided, the document outlines the detailed technical specifications required for the boat renovations.
View the file
Other files
Show all 35
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2022 GREAT LAKES ENFORCEMENT UNIT PATROL BOAT SPECIFICATIONS
Rick Asher Vessel
| SPECIFICATIONS |
| PROPOSED BOATS MEET SPECIFICATIONS |
(Yes or No)
| PROPOSED BOATS MEET SPECIFICATIONS With Remarks or Exceptions |
| DOES NOT MEET SPECIFICATION |
Paint
Repaint exterior and interior of vessel (NOT TO INCLUDE BOTTOM PAINT)
Repainting to match current color scheme and design.
Deck.
-Refinish non-skid coating on deck
Cabin Seating.
Two (2) Bentley Mariner Regular Duty Shock mitigating seats to replace current driver and front passenger seats.
Two (2) Bentley Mariner Regular Duty shock Mitigating seats shall be:
-Non-Swivel -Seat covering shall be 27.9 oz. Naugahyde. (NO BALLISTIC NYLON)
Galley
New Norcold NR 715 AC/DC refrigerator Black in color, new square 304 grade stainless steel sink (to match current size), New swivel high arc faucet made of marine grade chrome plated brass Replace countertop (to match current color or proximity to current color), and replace all plumbing and electrical wiring
Head
Replace existing Raritan Toilet system with Raritan current model equivalent, replace countertop (to match current color or proximity to current color), new 304 grade round stainless steel sink (to match current size), exhaust fan, replace ceiling and wall panels (to match current color), and replace all plumbing and electrical wiring.
LEFT BLANK FOR SPACING
Wiring
Replace all electrical wiring, outlets, and switches throughout vessel and helm.
To include the large engine room cables
Update fuse box
Adding two (2) 5-volt USB outlets near helm.
Throttles
Replace throttles with Glendinning electronic throttles
Dock Command removed from RFP
Windows
Replace all windows seals
Replace all port holes in cabin
Water Lines
Replace all water lines and through haul fittings throughout vessel
Engine Room
Replace or add insulation and sound dampening material in engine room
Hatches
Replace all hatch seals
Hoses and Lines
Repalce all hoses and lines through out.
To include, but not limited to fuel, exhaust, transmission, coolant lines, and heat exchanger lines.
Left Blank Intestinally removed from RFP
Law Enforcement Decals
Removal of old decals and placement of three new law enforcement shields on hull and cabin. Locations will be decided by Michigan DNR. Decals supplied by Michigan DNR
LEFT BLANK FOR SPACING
Prop Shafts
Inspect port and starboard prop shafts and straighten or replace where needed.
Replace sure seal system where the prop shaft goes through hull.
Drive Shaft Bearings
Replace shaft bearings in the port and starboard prop struts
Ventilation Fans
Replace two current ventilation fans located on the port and starboard side of the helm
Steering System
Replace hydraulic steering system with new SeaStar iso 9001 or its updated equivalent
Deck Lights
Four (4) LED flood lights
– One (1) port, one (1) starboard, one (1) aft deck, and one (1) bow deck.
- Rigid Industries LED Lighting SR-Q Series
Searchlights
Replace current searchlights with the following:
Two (2) search lights with remote control pads.
- Arc Electronics Remote Control Searchlight System (Model RCL-75)
- and any additional required equipment and installation/labor.
Navigational Horn
Replace current horn with Kahlenberg Model K-380 Complete Air Horn Kit, White
Windshield Wiper System
Replace current windshield wipers with Intermittent windshield wiper system with washer. With an independent control knob for each wiper blade (2). Controls mounted on console.
LEFT BLANK FOR SPACING
Navigational Lights
Replace current navigational lights with LED navigation lights (running and anchor).
Interior Dome lights
Replace all dome lights with red/white dome lights in cabin.
- Dr.LED Mars Dome LED Dome Lights
- 6 ¾ inch IP65
Siren Speaker
Replace existing siren speaker with Whelen SA340STS Speaker
Light Bar
Whelen Cenator® SOLO™ TY WeCanX™ TY4****42" Single Color, Blue. To include associated wiring and adapters.
Navigation Electronics
Two Twelve (12) inch Raymarine Axion Pro RVX to serve as the multi-function displays
Two (2) RV 400 12 degree or RV 400 20-degree transducers (depends on hull angles and system need)
One (1) Quantom 2 Chirp Doppler solid state Radar
Raymarine AIS5000
TRANSCEIVER FOR FIRST RESPONDERS
Raymarine Evolution EV-400 Power Vessel Autopilot Pack w/ P70R Control Head
Type 2 or Type 3 Hydraulic Pump, 12 - 24 Volt DC (depending on the vessel for autopilot)
All associated Raymarine wiring and hardware for installation.
Battery Charging System
Replace current battery charging system with Pro Mariner Pro Nautic 1250 P and Pro Mariner 60 A Pro Safe Isolator Fail Safe
LEFT BLANK FOR SPACING
Rudder
Remove and inspect both rudder shafts and related linkages-repair or replace as needed.
Bilge Pumps
Replace all bilge bumps, hoses, and switches. Adding additional two (2) back up bilge pumps. 2000gph
Cabin Wall and Ceiling
Replace cabin wall and ceiling panels throughout
Compass
New magnetic marine grade compass with dimmable backlighting
HVAC
Update current heating system and add air conditioning.
Generator
Rebuild generator head
Dash gauges
Update dash gauges
Engine Rebuild
Instead of replacement of engines, cost of rebuilding Port and Starboard Yanmar 6LY2A 6 Cylinder Diesel Engines
Boat in and out
Boats to be delivered to service area no later than November 1 and would return to the water May 1, unless an alternate agreement is made in an effort to complete work in its entirety.
Black Water Holding Tank
New Kracor grey water holding tank (to be same gallon capacity as currently installed)
Fresh Water Holding Tank
New Kracor fresh water holding tank (to be same gallon capacity as currently installed)
File details come from the government source that posted it. Updated .