Revised 2022 Great Lakes Patrol Boat Specs - Ransom H. Hill 1.docx
DOCX document 31 KB Posted
- Attached to
- LED - Renovate Four Patrol Boats - Addendum #1
- Solicitation number
- RFP - 751 - 230000000367
- Issued by
- Ingham County, Lansing City, Michigan
About this file
The document provides specifications for the renovation of four patrol boats for the Michigan Department of Natural Resources (DNR). The boats are to be repainted, have new seating, galley, head, wiring, windows, engines, and other components replaced or upgraded. Specific requirements are provided for items such as lighting, steering, bilge pumps, trim tabs, HVAC, and more. The scope of work and specifications indicate this is an addendum to an existing procurement opportunity, likely an invitation for bids (IFB) or request for proposals (RFP), for the LED - Renovate Four Patrol Boats project. The procurement is being managed by the State of Michigan, with the Ingham County and three jurisdictions within the City of Lansing as the participating local government entities.
The document does not provide details on pricing, set-asides, incumbents, funding sources, or award information. It appears to focus solely on the technical specifications and scope of work for renovating the four patrol boats.
View the file
Other files
Show all 35
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2022 GREAT LAKES ENFORCEMENT UNIT PATROL BOAT SPECIFICATIONS
Ransom H. Hill Vessel
| SPECIFICATIONS |
| PROPOSED BOATS MEET SPECIFICATIONS |
(Yes or No)
| PROPOSED BOATS MEET SPECIFICATIONS With Remarks or Exceptions |
| DOES NOT MEET SPECIFICATION |
Paint
Repaint exterior and interior of vessel (NOT TO INCLUDE BOTTOM PAINT)
Repainting to match current color scheme and design.
Deck.
Refinish non-skid coating on deck
Cabin Seating.
Two (2) Bentley Mariner Regular Duty Shock mitigating seats to replace current driver and passenger seat.
Two (2) Bentley Mariner Regular Duty shock Mitigating seats shall be:
-Non Swivel -Seat covering shall be 27.9 oz. Naugahyde. (NO BALLISTIC NYLON)
Galley
New Norcold NR 715 AC/DC refrigerator Black in color, new square 304 grade stainless steel sink (to match current size), New swivel high arc faucet made of marine grade chrome plated brass, replace countertop (to match current color or proximity to current color), and replace all plumbing and electrical wiring
Head
Replace existing Raritan Toilet system with Raritan current model equivalent, replace countertop (to match current color or proximity to current color), new 304 grade round stainless steel sink (to match current size), exhaust fan, replace ceiling and wall panels (to match current color), and replace all plumbing and electrical wiring.
LEFT BLANK FOR SPACING
Wiring
Replace all electrical wiring, outlets, and switches throughout vessel and helm.
To include the engine room large power cables Update fuse box
Add two (2) 5-volt USB outlets near helm
Windows
Replace all windows seals
Replace all port holes in cabin
Water Lines
Replace all water lines and through haul fittings throughout vessel
Engine Room
Replace or add insulation and sound dampening material in engine room
Hatches
Replace all hatch seals
Engines and Trasmissions
Replace Starboard Cummins QSB-5.9 Diesel Engine with Cummins Marine Diesel Engine QSB-6.7L 425mhp (per engine) @ 3000rpm variable speed rating
Replace Port side Cummins QSB-5.9 Diesel Engine with Cummins Marine Diesel Engine QSB-6.7L 425mhp (per engine) @ 3000rpm variable speed rating
Replace both transmissions
Credit for trade in of Two (2) Pre-Tier 4 Diessel Engines. Cummins QSB 5.9L 6 Cylinder.
Hoses and Lines
Repalce all hoses and lines through out.
To include, but not limited to fuel, exhaust, transmission, coolant lines, and heat exchanger lines.
Outdrives removed from RFP
LEFT BLANK FOR SPACING
Law Enforcement Decals
Removal of all decals and placement of three law enforcement shields on hull and cabin. Locations will be decided by Michigan DNR. Decals supplied by Michigan DNR
Sponsons
Replace sponsons Supply Conservation Officer Lettering on Port and Starboard sides to the same specs as currently on boat.
Prop Shafts
Inspect port and starboard prop shafts and straighten or replace where needed.
Replace sure seal system where the prop shaft goes through hull.
Drive Shaft Bearings
Replace shaft bearings in the port and starboard prop struts
Ventilation Fans
Replace two current ventilation fans located on the port and starboard side of the helm
Steering System
Replace hydraulic steering system with new SeaStar iso 9001 or its updated equivalent
Deck Lights
Four (4) LED flood lights
– One (1) port, one (1) starboard, one (1) aft deck, and one (1) bow deck.
- Rigid Industries LED Lighting SR-Q Series
Searchlights to be removed from RFP
Navigational Horn
Replace current horn with Kahlenberg Model K-380 Complete Air Horn Kit, White
LEFT BLANK FOR SPACING
Windshield Wiper System
Replace current windshield wipers with Intermittent windshield wiper system with washer. With an independent control knob for each wiper blade (2). Controls mounted on console.
Navigational Lights
Replace current navigational lights with LED navigation lights (running and anchor).
Interior Dome lights
Replace all interior dome lights with red/white dome lights in cabin.
- Dr.LED Mars Dome LED Dome Lights
- 6 ¾ inch IP65
Siren Speaker
Replace existing siren speaker with Whelen SA340STS Speaker
Light Bar
Whelen Cenator® SOLO™ TY WeCanX™ TY4****42” Single Color, Blue. To include associated wiring and adapters.
Navigation Electronics
Garmin Reactor 40 Hydraulic core pack with smart pump V 2 auto pilot.
Garmin AIS™ 800 Blackbox Transceiver
PART NUMBER 010-02087-00
All associated Garmin wiring and hardware for installation.
Battery Charging System
Replace current battery charging system with Pro Mariner Pro Nautic 1250 P and Pro Mariner 60 A Pro Safe Isolator Fail Safe
Rudder
Remove and inspect both rudder shafts and related linkages AND repair or replace as needed.
LEFT BLANK FOR SPACING
Bilge Pumps
Replace all bilge bumps, hoses, and switches. Adding additional two (2) back up bilge pumps. 2000GPH
Trim Tabs
Two (2) Bennet 2412ATP 24x12 Hydraulic Trim Tabs w/ATP
Compass
New magnetic marine grade compass with dimmable backlighting
HVAC
Update current heating system and add air conditioning.
Generator
Rebuild generator head
Dash gauges
Update dash gauges To include both engine and generator
Cummins DockCommand removed from RFP
Engine Rebuild
Instead of replacement of engines, cost of rebuilding Port and Starboard Cummins QSB 5.9L 6 Cylinder Diesel Engines
Boat in and out
Boats to be delivered to service area no later than November 1 and would return to the water May 1, unless an alternate agreement is made in an effort to complete work in its entirety.
Black Water Holding Tank
New Kracor grey water holding tank (to be same gallon capacity as currently installed)
Fresh Water Holding Tank
New Kracor fresh water holding tank (to be same gallon capacity as currently installed)
File details come from the government source that posted it. Updated .