RESAB-RAM-20250812.pdf
PDF 77 KB Posted
- Attached to
- Inconel and Titanium Parts
- Solicitation number
- N0017326Q5244
About this file
This is an engineering drawing for blocks manufactured by the U.S. Naval Research Laboratory. The document depicts three distinct block components labeled -01, -02, and -03, each with specific material specifications and hole patterns defined by threaded fastener requirements.
Component -01 and -02 are fabricated from INCONEL 625 (UNS N06625) in accordance with API 6A standards. Component -03 is manufactured from MONEL K-500 (UNS N05500) per ASTM B865 specifications and is age hardened. The blocks feature multiple threaded holes including 1/4-20 UNC and 8-32 UNC fastener holes, with specific hole patterns shown in orthographic and detail views. The drawing is model-based, referencing a solid model for all dimensional requirements, with standard tolerances of ±0.1 inches for single decimals, ±0.03 inches for double decimals, and ±0.010 inches for triple decimals. Angular tolerances are ±5.0 degrees. The drawing references ASME Y14.5-2009 for Geometric Dimensioning and Tolerancing standards. The document is identified as drawing number RESAB-RAM-20250812, Revision A, scaled 1:2, and is located at Trumbo Point Annex, Building F15 in Key West, Florida.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2X 1/4-20 UNC THRU ALL
2X 8-32 UNC THRU ALL
3X 1/4-20 UNC THRU
A
3X 1/4-20 UNC THRU2X 1/4-20 UNC THRU ALL
2X 8-32 UNC THRU
2X 8-32 UNC THRU
VIEW A
3X 1/4-20 UNC THRU
3X 1/4-20 UNC THRU
THIS IS A MODEL-BASED DRAWING. REFER TO SOLID MODEL FOR ALL DIMENSIONS. UNLESS 1.
OTHERWISE SPECIFIED ON THE FIELD OF THE DRAWING.
DIMENSIONAL REQUIREMENTS ON THE FIELD OF THE DRAWING SHALL BE INSPECTED.2.
UNLESS OTHERWISE SPECIFIED
APPLIES.3.
-01
INCONEL 625 (UNS N06625) IAW API 6A -02
INCONEL 625 (UNS N06625) IAW API 6A
-03
MONEL K-500 (UNS N05500) IAW ASTM B865, AGE HARDENED
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
X.X 0.1
X.XX 0.03
X.XXX 0.010
ANGULAR: 5.0
TITLE:
SIZE
B
DWG. NO. REV
WEIGHT: SCALE: 1:2
A
SHEET 1 OF 1
TRUMBO POINT ANNEX
BUILDING F15
KEY WEST, FL 33041
BLOCKS
RESAB-RAM-20250812
Released
SEE PDM FOR
RESP. ENGR.
AND APPROVALS
GD&T IN ACCORDANCE
WITH: ASME Y14.5-2009
COAT
FINISH
MATERIAL
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
| Drawing View4 |
| Drawing View5 |
| Drawing View6 |
| Drawing View7 |
| Drawing View8 |
| Drawing View9 |
File details come from the government source that posted it. Updated .