RESAB-RAM-20250807.pdf
PDF 60 KB Posted
- Attached to
- Inconel and Titanium Parts
- Solicitation number
- N0017326Q5244
About this file
This is an engineering drawing for specimen plates manufactured from Inconel 625 API 6A material. The drawing (RESAB-RAM-20250807, Revision B) specifies three plate configurations (-1, -2, and -3) with detailed dimensional and tolerance requirements per ASME Y14.5-2009 standards. All dimensions are in inches with standard tolerances of ±0.1 for single decimals, ±0.03 for double decimals, ±0.010 for triple decimals, and ±5.0 degrees for angular measurements.
The plates feature various through-holes with specific thread specifications including 8-32 UNC and 6-32 UNC threads, along with dimensional callouts such as a 0.252±0.002 diameter feature, 0.220±0.005 slot, and 0.375+0.008/-0.001 through holes. Configuration -1 measures 13.00 inches wide by 16.00 inches tall with corner holes omitted; configuration -2 is identical except as shown with a 3.50-inch width section; and configuration -3 is a simplified rectangular plate measuring 13.00 by 16.00 inches with 0.13-inch stock thickness. The drawing is a model-based drawing released by the U.S. Naval Research Laboratory at Trumbo Point Annex, Building F15, Key West, Florida, and references a solid model for complete dimensional details.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2X 8-32 UNC THRU
.17 X 90°, NEAR SIDE
4X 6-32 UNC THRU
.15 X 90°, NEAR SIDE
.252±.002
16.00
13.00
A
A
-1
.25 STK
.220±.005
SLOT
SECTION A-A
3.50
2X .375+ .008
.001 THRU ALL
OMIT CORNER HOLES
THIS IS A MODEL-BASED DRAWING. REFER TO SOLID MODEL FOR ALL DIMENSIONS. UNLESS 1.
OTHERWISE SPECIFIED ON THE FIELD OF THE DRAWING.
DIMENSIONAL REQUIREMENTS ON THE FIELD OF THE DRAWING SHALL BE INSPECTED.2.
UNLESS OTHERWISE SPECIFIED
APPLIES.3.
-2
SAME AS -1 EXCEPT AS SHOWN
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
X.X 0.1
X.XX 0.03
X.XXX 0.010
ANGULAR: 5.0
TITLE:
SIZE
B
DWG. NO. REV
WEIGHT: SCALE: 1:4
B
SHEET 1 OF 2
TRUMBO POINT ANNEX
BUILDING F15
KEY WEST, FL 33041
PLATES, SPECIMEN
RESAB-RAM-20250807
Released
SEE PDM FOR
RESP. ENGR.
AND APPROVALS
GD&T IN ACCORDANCE
WITH: ASME Y14.5-2009
COAT
FINISH
MATERIAL INCONEL 625 API 6A
13.00
16.00
.13 STK
-3
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
SIZE
B
DWG. NO. REV
SCALE: 1:4 SHEET 2 OF 2
RESAB-RAM-20250807 B
Released
| Sheet1 |
| Drawing View1 |
| Section View A-A |
| Drawing View8 |
| Drawing View9 |
| Sheet2 |
| Drawing View7 |
| Drawing View6 |
File details come from the government source that posted it. Updated .