RESAB-RAM-20250809.pdf
PDF 58 KB Posted
- Attached to
- Inconel and Titanium Parts
- Solicitation number
- N0017326Q5244
About this file
This is an engineering drawing for titanium shims manufactured per U.S. Naval Research Laboratory specifications. The document is a model-based technical drawing (Drawing Number RESAB-RAM-20250809, Revision A) released and located at Trumbo Point Annex, Building F15, Key West, Florida.
The drawing specifies four shim variants (-001 through -004) fabricated from Titanium B348, Grade 2 material. Key dimensional specifications include: shim -001 measuring 1.90 inches in length with a 0.12-inch step and 0.22-inch projection; shim -002 at 1.625 inches in length with 0.075-inch thickness; shim -003 at 3.125 inches in length with 0.070-inch thickness; and shim -004 at 2.250 inches in length with 0.333-inch height. Tolerances are specified as ±0.1 inch for single-decimal dimensions, ±0.03 inch for double-decimal dimensions, and ±0.010 inch for triple-decimal dimensions, with angular tolerances of ±5.0 degrees. Several variants include holes with specifications such as 2X Ø.172 inches with ±0.005/-0.001 tolerance and Ø.196 inches. All geometric dimensioning and tolerancing follows ASME Y14.5-2009 standards. The drawing references a solid model for comprehensive dimensional details and indicates that finish and coating information is provided in Note 4 and the PDM (Product Data Management) system for responsible engineer approvals.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
.22
.12
1.90
.075 1.625
.142+ .005 .001
.070
3.125
2X .172 .279 X 100° B
B
.333
2.250
2X .172+ .005 .001
.196 .700
SECTION B-B
.350
THIS IS A MODEL-BASED DRAWING. REFER TO SOLID MODEL FOR ALL DIMENSIONS. UNLESS 1.
OTHERWISE SPECIFIED ON THE FIELD OF THE DRAWING.
DIMENSIONAL REQUIREMENTS ON THE FIELD OF THE DRAWING SHALL BE INSPECTED.2.
UNLESS OTHERWISE SPECIFIED
APPLIES.3.
MATERIAL: TITANIUM B348, GRADE 24.
-001
-002
-003 -004
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
X.X 0.1
X.XX 0.03
X.XXX 0.010
ANGULAR: 5.0
TITLE:
SIZE
B
DWG. NO. REV
WEIGHT: SCALE: 1:1
A
SHEET 1 OF 1
TRUMBO POINT ANNEX
BUILDING F15
KEY WEST, FL 33041
SHIMS
RESAB-RAM-20250809
Released
SEE PDM FOR
RESP. ENGR.
AND APPROVALS
GD&T IN ACCORDANCE
WITH: ASME Y14.5-2009
COAT
FINISH
MATERIAL SEE NOTE 4
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
| Drawing View4 |
| Drawing View5 |
| Drawing View6 |
| Drawing View7 |
| Drawing View8 |
| Drawing View9 |
| Drawing View10 |
| Section View B-B |
| Drawing View12 |
File details come from the government source that posted it. Updated .