Requirements and Specifications.pdf

R eq u ir em en ts

S p ec if ic at io n

D o cu m en t

Requirements / Specifications: Microwave Amplifiers with 1.5K Noise Temperature 1

Version 1.0 (2019) Double-click on for further assistance.

Use this document to detail specifications/requirements for an item and/or ancillary services.

TITLE: Microwave Amplifiers with 1.5K Noise Temperature Requesting Lab/Division/Group: PML 687 (Quanum Sensors Division)

General Statement of Need NIST Quantum Sensors Division (QSD; 687) requires 3 amplifiers working in the 4-8 GHz bandwith with 1.5K noise temperature high IP3 saturation point. The amplifiers must be compatible with our existing cryostatat wiring, cryostat amplifier mounting hardward, and our existing low noise biasing electronics. These will be used to build a quantum sensors system using our Microwave Squid readout technology.

Items and/or Ancillary Services

Item 1: LNF-LNC4_8F_LG Quantity: 5 Specifications: RF bandwidth: 4-8 GHz, Noise Temperature: 1.5K typical, Noise Figure: 0.022dB typical, Gain: 23dB, DC-power: Vd=0.70V, Id=15mA, One gate and one drain supply only, RF-connectors: female SMA, DC-connector: 9-pin female Nano-D

Separately Priced Options and Services:

Item 2: [List minimum specifications.

Quantity: [Enter quantity here.] Specifications: [Enter quantity here.]

Click or tap here to enter text.

Service Requirements / Item Specifications

Section Requirements/Specifications Planning Considerations

☒ N/A

☐ List any visits required to allow potential vendors to see site specific constraints.

[Explain requirement here] ☐ US citizen required on-site (foreign nationals require preregistration 30 days prior)

☐ Vendor rep on-site more than three days

☐ Other considerations: [List other considerations to ensure an accurate quote]

Shipping & Delivery

☐ N/A

a. The vendor shall deliver equipment that meets the technical specifications above.

b.The equipment shall be shipped to NIST Location: 325 Broadway, MS 687.08, Boulder, CO 80305 Shipping criteria:

☐ Partial delivery acceptable

☐ Direct delivery to building required

[Explain need for requirement here] Building has: ☐ Loading dock u ir em en ts

S p ec if ic at io n

D o cu m

Requirements / Specifications: Microwave Amplifiers with 1.5K Noise Temperature 2

☐ Containerization preference: [Choose container] Other requirements: [List any other requirements here] Delivery date criteria:

☒ Delivery of goods, installation, and training shall be completed no later than: 8 weeks ARO

☐ Deliver no earlier than: [Insert date here] ☐ Other: [List other shipping, delivery, or specil requirements]

Electronic Media

☐ N/A

[Enter electronic media requirements by item here.]

☐ Software

☒ Electronic manuals

☐ License Key

☐ Other: [List any other Electronic Media requirements here] [Enter email address for software delivery here]

Installation

☒ N/A

[Enter installation requirements by item here.] ☐ Vendor technician on site

☐ Rigging

☐ Uncrating / Unpackaging

☐ Removal of packaging material

☐ Equipment set up

☐ Start-up services

☐ Turn key installation

☐ Other [Enter details here.] Note: When installation is required, TPOC or COR shall be the coordination point.

Facility / Utility Considerations

☒ N/A

[List site specific utility considerations by item here.] ☐ OFPM Work Order Number(s)

[List any Work Order Number(s) here] ☐ Power available

Voltage: [Enter voltage here] (V)

Max Current: [Enter max current draw here] (A)

Phase: [Choose phase] Frequency: [Typically 60Hz] (Hz)

NEMA Plug Type: [Enter plug type here] (i.e.: NEMA L5-20P)

Environment: [Choose environment] Other power consideration: [List any other power considerations here] ☐ Utility connections: [List relevant available utilities, pressure(s), and flowrate(s)] ☐ Other considerations: [List other considerations to ensure an accurate quote] u ir em en ts

S p ec if ic at io n

D o cu m

Requirements / Specifications: Microwave Amplifiers with 1.5K Noise Temperature 3

Warranty

☐ N/A

Base Manufacturer Warranty is acceptable [If you require an Extended Manufacturer Warranty, describe the warranty requirements per item here.] What is included?

☒ Labor ☒ Parts ☐ Travel ☐ Cost and liability for returns

☐ Other: [Enter other requirements here]

☒ Warranty length: 180 days

Period Length:[Ex. month, 6 month, year etc.]

Training

☒ N/A

[Training requirements (who, when, what, where) here. If on-site, is travel necessary?]

☐ On-site

☐ Off-site location: [Enter location(s) here] ☐ Number of trainees: [Enter number of trainees here] Scope of training:

☐ Operations ☐ Maintenance ☐ Troubleshooting ☐ Safety

☐ Other: [Enter other scope requirements here] ☐ Training materials to be provided: [Describe requirement here] ☐ Other: [Enter other training requirements here] Note: When training is required, TPOC or COR shall be the coordination point.

Inspection and Acceptance

☐ N/A

NIST will inspect and test the parts

☐ Planned government acceptance testing (7 business days)

☒ Gov’t acceptance expected to take longer than 7 business days: 14 days

☒ Inspection and acceptance plan: NIST will inspect and test the parts for basic functionality within 14 days, including the installation powering of the bias supply.

Evaluating the noise temperature will take longer than 14 days.

☐ Other: [Enter other requirements here]

Maintenance

☒ N/A

[Describe your maintenance requirements per item here]

Period Length: [Ex. month, 6 month, year etc.] What is included?

☐ Labor ☐ Spare parts ☐ Consumables ☐ Travel

☐ Cost and liability for returns ☐ Software updates ☐ Manuals

☐ Service plan length: [Enter service plan length here] ☐ Other: [Enter other requirements here] ☐ Requirements: [Enter requirements here] (i.e.: onsite within 72 hours, etc.)

☐ Option Period 1 ☐ Option Period 2

☐ Option Period 3 ☐ Option Period 4

Government Furnished Material / Equipment

[List any government furnished material/equipment per item here] ☐ Samples for testing

☐ Government equipment which will leave gov't site (TPOC must coordinate with division property custodian) u ir em en ts

S p ec if ic at io n

D o cu m

Requirements / Specifications: Microwave Amplifiers with 1.5K Noise Temperature 4

☒ N/A Serial Number: [Enter Serial Number here]

Description: [Enter description here] NIST property number: [Enter NIST property number here] ☐ Other: [Enter other details here]

Travel

☒ N/A

[Describe any travel requirements per item here] ☐ Explain: [Explain here] ☐ Other: [Enter other requirements here]

Vendor: To the maximum extent possible, include as part of appropriate sections above (maintenance, repair, etc.). Otherwise, it will be a separate line item, reimbursable per the Federal Travel Regulation.

Provide suggestions to improve this form by clicking here.

https://oaam.nist.gov/OAAMAcquisitions/FormFeedback/default.aspx