52_00_00_-_Drawings.docx
DOCX document 26 KB Posted
- Attached to
- Design Build Water Treatment Plant Federal contract opportunity
- Solicitation number
- R16PS00462
About this file
52 00 00 Drawings
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 00_00_02_-_Drawings_(1).pdf | ||
| 00_00_01_-_Specifications.pdf | ||
| 01_86_46_-_Water_Treatment_Performance_Requirements.docx | DOCX document | |
| SF-30.pdf | ||
| 01_20_05_-_Cost_Estimating_Requirements.docx | DOCX document | |
| R16PS00462_Solicitation_Amendment_5_(2).docx | DOCX document | |
| R16PS00462_Questions_and_Answers_Amendment_5.docx | DOCX document | |
| SF-30.pdf | ||
| R16PS00462_Solicitation_Amendment_4.docx | DOCX document | |
| Email_-_Re__Phase_2_R16PS00462.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Navajo Gallup Water Supply Project Cutter Lateral - Water Treatment Plant and Reach 21 Solicitation No.
SECTION 52 00 00
DRAWINGS
GENERAL
DISCREPANCIES, ERRORS, OR OMISSIONS
Inform the CO of discrepancies discovered on drawings in accordance with clause at FAR 52.236-21, Specifications and Drawings for Construction. Promptly inform the CO of discrepancies discovered on the drawings. The CO will make a determination in writing. Any adjustment by the Contractor without such a determination shall be at its own risk and expense.
PROJECT CONDITIONS
Where there are differences as determined by the CO between details and dimensions shown on drawings and details and dimensions of existing features at jobsite, use details and dimensions of existing features at jobsite.
INFORMATION DRAWINGS
Drawings marked "For Information Only" in the drawing list are included to show existing features about which knowledge is required to perform work under this contract. These drawings do not show work to be performed under this contract.
If there are differences as determined by the CO between details and dimensions shown on these drawings and those of existing features at jobsite, use details and dimensions of existing features at jobsite.
STANDARD DRAWINGS
Standard drawings may show details which are not a part of work under this contract. Disregard details shown on these drawings which are not applicable to work under this contract.
COPIES OF DRAWINGS
One set of fullsize (22 inches by 34 inches) drawings, except standard drawings, will be furnished to the Contractor.
Upon request, additional half-size (11 inches by 17 inches) copies of standard drawings will be furnished to the Contractor.
LIST OF DRAWINGS
Drawings listed in Table 52 00 00A - List of Drawings, are made a part of Section C - Description/Specifications.
PRODUCTS
Not Used
EXECUTION
Not Used
Table 52 00 00A - List of Drawings
| Sheet No. |
| Drawing No. |
| Title |
General:
| 1 |
| 1695-529-401 |
| General Map |
| 2 |
| 1695-529-2101 |
| Project Location Map |
| 3 |
| 1695-529-2103 |
| Reach 21 – Right-of-Way Exhibit Maps |
Information Drawings:
| 4 |
| 1695-D-Figure 1 |
| Line Pipe – Site Plan |
| 5 |
| 1695-D-Figure 2 |
| System Profile – Plan and Profile – Beginning to Sta. 23100+00 – Sheet 1 of 5 |
| 6 |
| 1695-D-Figure 3 |
| Plan and Profile – Sta. 23100+00 to Sta. 23150+00 – Sheet 2 of 5 |
| 7 |
| 1695-D-Figure 4 |
| Plan and Profile – Station 23150+00 to Sta. 23200+00 – Sheet 3 of 5 |
| 8 |
| 1695-D-Figure 5 |
| Plan and Profile – Station 23200+00 to Sta. 23250+00 – Sheet 4 of 5 |
| 9 |
| 1695-D-Figure 6 |
| Plan and Profile – Sta. 23250+00 to End – Sheet 5 of 5 |
| 10 |
| 1695-D-Figure 7 |
| Phase 3 Connection – Steel Pipe - Plan |
| 10A |
| C-12 |
| Eastern Navajo Water Pipeline - Cutter Lateral Phase 3 – As-Built Plan and Profile – |
Sta 0+00 to 25+00
| 10B |
| C-13 |
| Eastern Navajo Water Pipeline - Cutter Lateral Phase 3 – As-Built Plan and Profile – |
Sta 25+00 to 51+25
| 10C |
| C-48 |
| Eastern Navajo Water Pipeline - Cutter Lateral Phase 3 – As-Built – DZ Tanks Piping Plan |
| 11 |
| 1695-D-355 |
| Cathodic Protection - Test Station and Junction Box |
| 11A |
| 1695-D-60095 |
| Cutter Lateral SCADA Systems Integration Overview |
Process Instrumentation and Sampling Plan Schematic Example
Cutter Reservoir – Water Quality Data
Pipe Schedule
Standard Drawings:
| 15 |
| 40-D-6032 |
| Induction Motors – Design and Nameplate Data to be Furnished by Contractor |
END OF SECTION
Drawings 52 00 00 - 1
File details come from the government source that posted it. Updated .