Revised_Pages_-_MOD_004.pdf

Solicitation No. R15PS00361 Anderson Ranch Powerplant Station Service Replacement

Amendment No. 004

(Revised)

01 35 30 - 2

Signs; Signals and Barricades; Powered Industrial Vehicles; Safety and Health Programs; Scaffolds; Steel Erection; Tools - Hand and Power; Welding and Cutting.

b. Current first aid CPR certification.

2. Include resume with current telephone numbers of references, description of safety representative responsibilities, and copies of training certifications.

B. Contractor’s Part-time Onsite Safety and Health Professional

1. The Contractor shall identify an individual meeting the requirements training and experience requirements of 1.04A and:

a. Possessing at least a 4 year Bachelor’s Degree from an accredited college or university in:

1) Safety Engineering,

2) Safety and Occupational Health, or

3) Industrial Hygiene (IH)

b. Registered Professional Safety Engineer, Certified Safety Professional (CSP), or CIH certified by the Board of Certified Safety Professionals /American Board of Industrial

c. Knowledgeable of current safety trends, industry practices, and can exercise technical expertise

2. Include resume with current telephone numbers of references, description of safety representative responsibilities, and copies of training certifications, degree, and registration.

3. The individual shall be qualified by virtue of education, training, certification, and experience in which professional status in the construction safety field has been established.

C. DELETED

D. Certified Industrial Hygienist (CIH).

1. CIH duties include, but are not limited to:

a. Establish work place exposure assessments in accordance with federal, state, and local regulations and standard industrial hygiene practices to ensure personnel exposures are below regulated levels.

b. Have an on-site presence whenever activities are anticipated to generate or release emissions.

01 35 30 - 3

c. Review and sign the Asbestos Hazard Abatement Plan, Emissions Monitoring, Waste Characterization, Handling, and Disposal Plans prior to submission.

d. Conduct and/or review and sign all asbestos pre-abatement test results, working level test results, post-abatement test results, and clean-up monitoring in accordance with the submitted plans.

e. Visit the site during start-up of asbestos removal activities and a minimum of one time per month during all asbestos clean-up and removal activities to confirm that the work is being performed in accordance with the submitted plans.

f. Review and sign the Emissions Monitoring Plan, Waste Characterization, Handling, and Disposal Plan, Heavy Metal Exposure Certifications and Test Results, Working Level Test Results, Post-Construction Test Results, and Certificate of disposal.

g. Conduct and/or coordinate and review and sign all coatings background sampling, surface sampling, waste stream sampling, personal exposure monitoring, area air monitoring, peripheral air monitoring, and clean up monitoring.

h. Full authorization to correct unsafe acts, stop work, prevent exposures, control contamination, engineering controls and containment failures.

i. Exposure assessments to select or verify personal protective equipment or respiratory protection inside and outside containments.

j. Prepare detailed monthly CIH inspection reports in accordance with RSN 01 35 30-2.

k. Attend the Safety Program Review Meeting in accordance with the RSHS section 3

2. Include resume with current telephone numbers of references, description of CIH responsibilities, and copies of training certifications and registration.

1.05 APPLICATION

A. Contractor’s Onsite Safety Representative authorities, duties, and responsibilities:

1. Responsible for effectively implementing the Contractor’s Safety Program.

01 35 30 - 4

2. The Safety Representative shall coordinate all emergency response activities.

3. Recommend controls for observed hazards or predicted hazards

4. Full authorization to correct unsafe acts on the spot, including the authority to stop work to correct safety and health problems.

5. Lead weekly safety meetings at the jobsite.

6. Onsite, during any and all construction activities.

7. Assemble, review, and sign each Job Hazard Analysis (JHA).

8. Verify the correct use of respiratory protection and personal protective equipment.

9. Conduct and prepare weekly safety inspections in conjunction with the onsite government representative listing noted deficiencies, their abatement dates, follow up action. The report shall be available for review onsite.

10. Provide direct oversight and assemble a detailed report of all incident reviews, near-misses, accidents, and emergency response or rescue actions.

11. The Onsite Safety Representative may have other non-safety duties.

B. Contractor’s Part-time Onsite Safety and Health Professional authorities, duties, and responsibilities:

1. Shall NOT be supervised by the onsite superintendent, but shall report directly to the corporate manager/owner.

2. Shall have full authorization to correct unsafe acts on the spot, including the authority to stop work to correct safety and health problems.

3. Shall visit the site weekly and inspect the site with a Government representative listing noted deficiencies, their abatement dates, and follow up action. The report shall be available for review onsite.

4. Shall participate in the planning, preparation and execution of high risk activities including, but not limited to:

a. Development and approval of JHA.

b. Review of equipment and materials.

c. Employee training.

d. Review of JHA with employees.

e. Observing and reporting on activities.

5. Duties include, but are not limited to the following:

01 35 30 - 5

a. Before start of construction, identify existing and predictable unsanitary, hazardous, or dangerous conditions.

b. Approve the site-specific Contractor safety and health plans and program prior to submission.

c. Coordinating all elements contained in the Contractor safety and health program and these specifications, including safety training.

d. May act as the qualified person for supervising erection and accepting final configuration and perform daily checks of fall protection, excavation and scaffolding systems in accordance with the regulatory standards.

e. Assemble, review and sign each Job Hazard Analysis (JHA).

f. Review and finalize all incident reviews, near-misses and accident reports in accordance with RSHS Section 3.

g. Attend the Safety Program Review Meeting and Conduct the monthly Joint Safety Policy Meetings in accordance with the RSHS section 3.

C. Contractor’s Onsite Safety and Health Professional authorities, duties, and responsibilities:

1. Shall NOT be supervised by the onsite superintendent, but shall report directly to the corporate manager/owner.

2. Shall have full authorization to correct unsafe acts on the spot, including the authority to stop work to correct safety and health problems.

3. Shall visit the site weekly and inspect the site with a Government representative listing noted deficiencies, their abatement dates, and follow up action. The report shall be available for review onsite.

4. Shall participate in the planning, preparation and execution of high risk activities including, but not limited to:

a. Development and approval of JHA.

b. Review of equipment and materials.

c. Employee training.

d. Review of JHA with employees.

e. Observing and reporting on activities.

5. Duties include, but are not limited to the following:

a. Before start of construction, identify existing and predictable unsanitary, hazardous, or dangerous conditions.

01 35 30 - 6

b. Approve the site-specific Contractor safety and health plans and program prior to submission.

c. Coordinating all elements contained in the Contractor safety and health program and these specifications, including safety training.

d. May act as the qualified person for designing fall protection, excavation and scaffolding systems in accordance with the regulatory standards.

e. Assemble, review and sign each Job Hazard Analysis (JHA).

f. Review and finalize all incident reviews, near-misses and accident reports in accordance with RSHS Section 3.

g. Conduct and prepare weekly safety inspections in conjunction with the onsite government representative listing noted deficiencies, their abatement dates, and follow up action. The report shall be available for review onsite.

h. Attend the Safety Program Review Meeting and Conduct the monthly Joint Safety Policy Meetings in accordance with the RSHS section 3.

1.06 QUALITY ASSURANCE

A. Contractor’s Onsite Safety and Health Representative:

1. The effectiveness of the Contractor’s Onsite Safety Representative in prosecuting the safety program will be subject to continued review and approval by the COR.

2. Should the Contractor’s onsite safety representative’s effort be deemed insufficient the Contractor may be required to provide the services of a qualified, full-time safety and health professional at no additional cost to the Government.

B. Contractor’s part-time Safety and Health Professional

1. The effectiveness of the Contractor’s Onsite Safety Professional in prosecuting the safety program will be subject to continued review and approval by the COR.

2. Should the Contractor’s part-time safety professional effort be deemed insufficient the Contractor may be required to provide the services of a qualified, full-time Safety and Health Professional at no additional cost to the Government.

C. Certified Industrial Hygienist:

01 35 30 - 7

1. The effectiveness of the Contractor’s Onsite CIH in prosecuting the asbestos and coatings activities will be subject to continued review and approval by the COR.

2. Should the Contractor’s CIH effort be deemed insufficient the Contractor may be required to provide the services of a qualified, full-time CIH during all coatings and asbestos related activities at no additional cost to the Government.

D. Safety Program:

1. The effectiveness of the Contractor’s Safety Program will be subject to continued review and approval by the CO.

PART 2 PRODUCTS

Not Used

PART 3 EXECUTION

Not Used

END OF SECTION