R-217921 Troop 4 Metamora - Range Fence Project Scope of Work UPDATED 6-21-24.pdf

PDF 1 MB Posted

Attached to
Metamora Shooting Range Fence IFB - SM
Solicitation number
24-493ISP-OPERA-B-43076
Issued by
Vermilion County, Illinois

About this file

The document is a Scope of Work for the Troop 4 Metamora - Range Fence Project, which is a state and local contract opportunity issued by the Illinois State Police (ISP) for Woodford County. The project requires the installation of 1,350 linear feet of 6-foot high chain link fence with 3-strand barbed wire on top, as well as two swing gates. The fence and gates must meet specific requirements, including maximum post spacing, concrete footing depths, and gate dimensions. The work also includes brush and tree removal as necessary. The contract opportunity has a mandatory vendor walk-through scheduled for June 18, 2024.

The contract opportunity does not provide details on pricing terms, set asides, incumbents, funding requirements and sources, or any other salient information beyond the scope of work. The focus of the document is solely on outlining the technical specifications and requirements for the fence and gate installation project.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Troop 4 Metamora - Range Fence Project Scope of Work

Summary

• Install 6+1 GAW 9g chain link fence and two swing gates, all with 3-strand barb wire on top.

• 1350� chain link fence – denoted by yellow line in picture. Length was determined during mandatory vendor walk-through on 6/18/24.

• Line post scheduled galvanized steel pipe maximum of 10� apart.

• 9.5� fence posts for fence and swing gates with 3.5� encased in concrete in the ground.

• 6� high chain link fence with 3-strand barb wire on top. (Total height of fence to be 6� 10in, which includes the 3-strand barb wire). See depic�on on page 3.

• Install one (1) two (2) swing gate. 6� high. Each gate side to be 8� wide for a 16 � total opening with 3-strand barb wire on top. (Total height of gate to be 6� 10in, which includes the 3-strand barb wire). See depic�on on page 3. Gate to be located on southeast side – denoted by red line in picture on page 2.

o Bulldog hinges.

o Center drop rod assembly.

o Truss rods or wires to be included.

• Install one (1) one (1) swing gate. 6� high. Gate to be 3� wide with 3-strand barb wire on top.

(Total height of gate to be 6� 10in, which includes the 3-strand barb wire). Gate to be located on southeast side – denoted by red line in picture on page 2.

o Bulldog hinges.

o Truss rods or wires to be included.

• Brush and tree removal necessary for fencing to pass through.

Location

Fence Type

Gate Type

Truss Wires

File details come from the government source that posted it. Updated .