Quadrangle_Specification_Sheet.pdf
PDF 429 KB Posted
- Attached to
- Pole Banners (Supply, Install, and Maintenance)
- Solicitation number
- IFB- 24 - 233
- Issued by
- Pinellas County, Florida
About this file
The document is a design specification sheet for street banners in the Downtown Core of St. Petersburg, Florida, detailing precise technical requirements for banner construction and installation. The specifications outline a standard size banner configuration for pole mounting, specifically designed for the city's downtown area, with precise measurements and material requirements.
The technical specifications mandate a one-piece vinyl construction with specific material weight (at least 13 oz., equaling 26 oz. or more), digital printing using solvent UV-based ink with semi-gloss liquid laminate, and RF welding on all sides. Banners must be 24" wide, 88" long, with a 5" banner arm pocket, brass #3 grommets, and positioned 10 feet above grade. Additional requirements include rolling the banner with the arm pocket on the outside of the roll and using precise hem and grommet placement techniques. The document provides detailed diagrams showing exact measurements for Side A and Side B of the banners, ensuring uniform and consistent production for the city's street banner program.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Pole_Banners_(Supply,_Install,_and_Maintenance)_(Addendum_#3_Revision).pdf | ||
| Map.pdf | ||
| Pennant_Specification_Sheet.pdf | ||
| Rectangle_Specification_Sheet.pdf | ||
| Base_Agreement.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Design Speci�cations for St. Petersburg Street Banners (Downtown Core) Standard size banner con�guration.
StreetBannerSpecifications
One piece vinyl construction.
Banner material is folded over to create banner.
(Side A and Side B.)
Vinyl material should be at least a 13 oz. product equaling 26 oz. or more.
Digitally printed with a solvent UV based ink with a semi gloss liquid laminate.
RF weld on all sides.
RF weld at 5" line to form the banner arm pocket. Pocket must have a 5" inside opening.
Brass grommets size #3
Banners should be rolled with banner arm pocket to the outside of the roll.
1.75"
.5"
45˚
Hem Length
Bottom of Banner is 10 ft. Above Grade
Banner Arm Pocket Hem
Grommet Location
Grommet Location
Grommet Location
2"
2"
8"
13"
24.5"
24"
24.75"
Le ng th
7'
-4
Pole Arm
Le ng th
.5
5' -1
.5
2"
2"
2"
2"
2"
2"
1.75"
.5"
45˚
Hem Length
Bottom of Banner is 10 ft. Above Grade
Banner Arm Pocket Hem
Grommet Location
Grommet Location
Grommet Location
8"
13"
24.5"
24"
24.75"
Le ng th
7'
-4
Pole Arm
Le ng th
.5
5' -1
.5
Width 24" (2'-0")
Le ng th
2"
2"
2"
2"
2"
2"
2"
2"
SIDE A
SIDE B
File details come from the government source that posted it. Updated .