QP 6020 Cargo Net Hook 8-13-20.pdf
PDF 130 KB Posted
- Attached to
- W912CH-25-R-0041 10K CARGO NET
- Solicitation number
- W912CH-25-R-0041-0003
- Issued by
-
Department of the Army
About this file
This Quality Assurance Provisions document dated 13 Aug 2020 specifies inspection requirements for a Hook, Cargo Net (Part Number 6020). The document outlines a comprehensive quality control process involving First Article Inspection (FAI) and Conformance Inspection, which includes material and process certification review, visual and dimensional examinations, and end item testing. The FAI and subsequent inspections have strict acceptance criteria, with any material specification deviations, visual defects, or dimensional tolerances outside of drawing 6020 requirements resulting in automatic rejection. The detailed inspection process uses ANSI/ASQ Z1.4 sampling standards and includes a detailed Table I that classifies potential nonconformities as major or minor across categories such as materials, heat treatment, finish, construction, workmanship, and marking.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
13 Aug 2020 Quality Assurance Provisions:
Hook, Cargo Net P/N: 6020
1. First Article Inspection (FAI). The FAI includes:
a. A review of material and process Certifications of Compliance.
b. End Item Visual Examination (see 3.3).
c. End Item Dimensional Examination (see 3.4).
d. End Item Testing (see 3.5).
2. Acceptance/rejection criteria for the FAI. Materials not as specified on the drawing, any visual defect any dimension out of tolerance or not meeting the FAI requirements of drawing 6020 as applicable shall be cause for rejection of the FAI.
3. Conformance Inspection
3.1 Sampling. Sampling shall be performed in accordance with ANSI/ASQ Z1.4.
3.2 Conformance inspection. The end items shall be examined for materials and the requirements of 3.3 and 3.4 and 3.5
3.3 End item visual examination. The end items shall be examined for the nonconformities listed in Table I. Any nonconformity shall be cause for rejection of the lot.
TABLE I. End item visual nonconformities Classifications
Feature Defect Major Minor Materials Not as Specified 101
Heat Treatment Omitted or Not as Specified 102
Finish
Omitted or Not as Specified 103 Any breaks or cracks in finish 104 Any evidence of corrosion 105 Dirt, oil, grease or other foreign matter 201
Method of Forming Not as Specified 106 Surface Roughness Omitted or Not as Specified 107
Construction and Workmanship
Any component cracked, malformed, misaligned or damaged 108
Sharp edges, burrs, or metal slivers 109 Components incorrectly assembled, loose or missing 110
Identification and Marking
Missing, incomplete, illegible, improper location or not as specified 202
3.4 End Item Dimensional Examination. The contractor shall submit a quality plan to the government for approval prior to the FAI. The plan must detail methods of inspections to insure the items are manufactured and tested to the requirements of the Technical Data Package.
13 Aug 2020 Quality Assurance Provisions:
Hook, Cargo Net P/N: 6020
3.5 End Item Testing. Drawing 6020 as applicable, provides the end item testing requirements for the FAI and conformance examinations.
4. Classification of nonconformities. Classification of nonconformities not listed in Table 1 shall be as specified by the procuring activity.
DISTRIBUTION STATEMENT A
THIS DOCUMENT IS APPROVED FOR PUBLIC RELEASE, DISTRIBUTION IS UNLIMITED.
File details come from the government source that posted it. Updated .