QP 11-1-886 Anchoring Device Cargo and Personnel.pdf
PDF 59 KB Posted
- Attached to
- Anchoring Device Solicitation / Synopsis
- Solicitation number
- W912CH-24-R-0015-RFI
- Issued by
-
Department of the Army
About this file
This document is a Quality Assurance Provisions document for an Anchoring Device, Cargo/Personnel with Part Number 11-1-886, dated 7 Oct 2014. The document details comprehensive inspection requirements for the product, including First Article Inspection (FAI), Conformance Inspection, and specific visual and dimensional examination criteria. The inspection process follows ANSI/ASQ Z1.4 sampling standards, with an Acceptable Quality Level (AQL) of 1.0 for both visual and dimensional examinations.
The document provides a detailed Table I outlining potential nonconformities/defects across multiple product components, including webbing, construction, metal components, thread, stitching, workmanship, and identification/marking. Defects are classified as either major or minor, with specific criteria for rejection. The inspection process covers aspects such as material specifications, assembly completeness, dimensional tolerances, stitching quality, and overall workmanship. Any deviation from specified drawings, dimensions, or quality standards can result in rejection of the Anchoring Device Assembly.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W56HZV-24-R-0015 Soliciation Amendment 0002.pdf | ||
| Q and A for Anchoring Device Solicitation.xlsx | XLSX spreadsheet | |
| W56HZV-24-R-0015 Soliciation Amendment 0001.pdf | ||
| Q and A for Anchoring Device Solicitation.xlsx | XLSX spreadsheet | |
| W56HZV-24-R-0015 Soliciation AMD 0001.pdf | ||
| Copy of TL Rock IslandTPP-S63C0071EH TARDEC ACE 1022-11-174355602563.xlsx | XLSX spreadsheet | |
| W912CH24R0015.pdf | ||
| TPP for NSN 1670-00-999-3544 Anchor Device 11-16-22.zip | ZIP file |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
7 Oct 2014
Quality Assurance Provisions
Anchoring Device, Cargo/Personnel
P/N 11-1-886
1. First Article Inspection (FAI). The FAI includes:
a. A review of material Certifications of Compliance.
b. End Item Visual Examination, See 3.3.
c. End Item Dimensional Examination, See 3.4.
2. Acceptance/Rejection Criteria for the FAI. General Inspection shall be IAW
Drawing 11-1-886 and its associated drawings. Materials not as specified, any dimension out of tolerance, any visual defect shall be cause for rejection of the FAI.
3. Conformance Inspection.
3.1 Sampling. Sampling shall be performed IAW ANSI/ASQ Z1.4.
3.2 Conformance Inspection. The end items shall be examined for materials and the requirements of 3.3 and 3.4.
3.3 End Item Visual Examination. The end items shall be examined for the nonconformities/defects IAW Table 1. The lot size shall be expressed in units of Anchoring
Device Assemblies. The sample unit shall be one Anchoring Device Assembly. The inspection level shall be II, and the Acceptable Quality Level (AQL) shall be 1.0.
TABLE I. End Item Visual Nonconformities/Defects
Classification
Examine Nonconformity/Defect_ Major Minor_____
Webbing Not specified type or class 101
Cut, tear, holes, abrasion or weak area 102
Ends not seared or wax dipped as specified 201
Color not as specified 202
Construction Any component missing, not assembled or joined as specified 103
Metal Components Fractured, malformed, bent or otherwise damaged 104
Burrs or sharp edges 105
Finish not as specified or any corrosion 106
Thread (nylon) Not type, class, or size specified 107
Color not as specified 203
7 Oct 2014
Quality Assurance Provisions
Anchoring Device, Cargo/Personnel
P/N 11-1-886
TABLE I. End Item Visual Nonconformities/Defects (Con’t)
Classification
Examine Nonconformity/Defect_ Major Minor_____
Stitches and Stitching pattern not as specified 108
Stitching Any row of stitching missing 109
One stitch per inch fewer than minimum or more than maximum specified 204
Two or more stitches per inch fewer than minimum or more than maximum specified 110
Thread breaks, bobbin runouts, skipped stitches and runoffs 111
Ends of stitching not backstitched or secured as specified 112
Tension loose resulting in loose top or bottom thread, or tight tension causing puckering of material at the stitch line 205
Needle chews or bunched stitching 113
Workmanship Any sharp edge, burrs, or metal sliver 114
Grease, oil, ink smears, dirt or other foreign matter 206
Thread ends not trimmed as specified 207
Exposed ends of webbing not seared as specified 2 08
Identification Omitted, incorrect, illegible, Marking location, size or color not as specified 209
3.4 End Item Dimensional Examination. The end items shall be examined for conformance to the dimensions specified on the drawings. Any dimension not within the specified tolerance shall be classified as a nonconformity/defect. The lot size shall be expressed in units of
Anchoring Device Assemblies. The sample unit shall be one Anchoring Device Assembly.
The inspection level shall be S-3 and the AQL, shall be 1.0.
4. Classification Of Nonconformities/defects. Classification of nonconformities/defects not referenced on the Drawings shall be as specified by the procuring activity.
File details come from the government source that posted it. Updated .